Driving the brakes and falling backwards hurt people, with a slight fracture of the leg, the family

Updated on Car 2024-08-05
8 answers
  1. Anonymous users2024-02-15

    Don't you have insurance? If you have all three, it's fine. If not, you can also wait for the other party to be discharged from the hospital and solve it all at once.

  2. Anonymous users2024-02-14

    Are there any three? If there are three, you don't have to worry about him, just let him talk to the insurance company, if not, there will be a lawsuit, reasonable money will be given to him, and unreasonable money will not be given.

  3. Anonymous users2024-02-13

    Regardless of bone cracks and fractures, injured muscles and bones that cannot go to work for 100 days, plus diagnosis and treatment examination fees, and escort fees, 20,000 yuan is needed.

  4. Anonymous users2024-02-12

    260,000 is not much, practice your skills well in the future, don't do such a thing again, while bringing harm to others, you also have corresponding losses.

  5. Anonymous users2024-02-11

    Grade 9 common fractures: 1. Jaw fracture, residual dysfunction after traction or fixation**; 2. Partial defect of maxilla or mandible with missing or broken teeth of more than 7 pieces; 3. More than 12 rib fractures, or more than 4 rib parts are missing; More than 8 rib fractures and 4 deformities healed; 4. Comminuted fracture of a vertebral body, bony mass in the spinal canal; 5. Fracture of one vertebral body and corresponding appendages, after surgery**; 2. Compression fracture of the vertebral body; 6. More than two fractures or comminuted fractures of the pelvis, severe malunion; 7. Comminuted or compression fracture of the epiphyseal of the long bones of the extremities in adolescents; 8. Comminuted fractures of both calcanes.

    Article 20] Compensation for lost work is determined on the basis of the victim's lost time and income. The lost time is determined on the basis of a certificate issued by the medical institution to which the victim received. Where the victim continues to miss work due to disability due to injury, the time of missing work may be calculated to the day before the date of disability.

    If the victim has a regular income, the compensation for lost work shall be calculated on the basis of the actual reduced income. If the victim has no regular income, it is calculated on the basis of his average income in the last three years; Where the victim cannot provide evidence to prove his or her average income in the last three years, it may be calculated by referring to the average wages of employees in the same or similar industry in the previous year at the location of the court where the lawsuit is filed.

  6. Anonymous users2024-02-10

    In traffic accidents, the traffic police will first determine the responsibility, and then negotiate compensation according to the injury. If the other party makes a request, you can agree or disagree, and if you can't reach an agreement, you can also go through the litigation process.

  7. Anonymous users2024-02-09

    It's best for you to take the other party and all the materials of the other party to the insurance company for a claim, the insurance company will calculate the compensation that the other party deserves, you don't give it, you will be discounted if you go to the claim after you give it, and you can directly let the insurance company give it to them.

  8. Anonymous users2024-02-08

    1. Analysis of possible causes.

    1. It is the lack of necessary maintenance of the brake system, there are too many impurities in the brake master cylinder, the sealing is not tight, the vacuum booster pump fails, the brake oil is too dirty or the air resistance occurs after the mixing of several brake oils after heating, the brake master cylinder or sub-cylinder leaks, and the air leakage of the gas tank or pipeline interface;

    2. It is due to improper operation that causes the failure of the parts;

    3. Due to serious overload, under the action of gravitational acceleration, the inertia of vehicle movement is increased, which directly leads to brake failure.

    Second, the treatment method.

    1. Control the direction according to the road conditions and speed, disengage the high-speed gear, and at the same time quickly blast the empty fuel and shift the high-speed gear into the low-speed gear. In this way, the engine will have a lot of traction resistance and the speed of the vehicle will be reduced rapidly. In addition, the handbrake should be used in conjunction with the low-speed gear shift, but it should be noted that the handbrake should not be tightened or pulled too slowly.

    If it is pulled too tightly, it is easy to make the brake disc "lock", and it is likely to damage the transmission parts and lose the braking ability; If it is pulled too slowly, the brake disc will wear and ablate and lose its braking effect.

    2. Use the bumper, carriage and other rigid parts of the car to rub and collide with natural obstacles (rocks, trees or soil slopes) on the side of the road to achieve the purpose of forcibly stopping and getting out of danger, and reduce the accident loss as much as possible.

    3. If the brake fails when going uphill, it should be reduced to medium and low gear in time to maintain sufficient power to drive uphill to the top of the slope and stop. If you need to park on a half-slope, you should keep the forward low gear, tighten the hand brake, and the personnel with the vehicle should use stones, skids and other objects to jam the wheels in time. If there is a backward slippage, the rear of the car should face the hillside or the safety side, and the headlights and emergency lights should be turned on to attract the attention of the vehicles in front and behind.

    4. When the downhill brake fails and the speed of the vehicle cannot be controlled by the mechanism of the vehicle itself, the driver should decisively use natural obstacles, such as rocks and trees on the side of the road, to cause resistance to the car. If you can't find a suitable terrain or object to use for a while, in an emergency, you can move one side of the car closer to the side of the mountain, and gradually reduce the speed of the vehicle by rubbing to increase the resistance.

    5. The vehicle should step on the brakes when going down a long slope or a steep slope, regardless of whether there is a situation or not. It can not only test the performance of the brakes, but also buy time to control the speed of the vehicle when the brakes are found to be out of order, also known as predictive braking.

    3. Preventive measures.

    Do not ignore the daily maintenance of the brake system, in order to prevent the occurrence of brake failure, please maintain the brake system in time, regular maintenance and overhaul is essential, for the safety of life, you must not ignore the regular maintenance.

    Note: Check whether the brake shoes are in good condition, and do not overuse the brakes, hang the low gear when going downhill, use the brake of the engine to let the car drive, supplemented by the foot brake; Avoid severe overloading to prevent brake failure.

Related questions
15 answers2024-08-05

Hello, in this case, it is recommended to check the brake pads, brake disc, oil pipe, whether there is oil leakage, whether the brake cylinder is back or not.

14 answers2024-08-05

Drop an appropriate amount of alcohol between the disc and the liner and brake gently, let the liner gently touch the disc and then turn the wheel, take the diluted lube away from the position of the liner as much as possible, and then wipe off the mixture of alcohol and lube with a clean cotton cloth. >>>More

22 answers2024-08-05

There are many reasons for brake failure, one is the lack of necessary maintenance of the brake system, too many impurities in the brake master cylinder, poor sealing, vacuum booster pump failure, and brake fluid. >>>More

14 answers2024-08-05

This situation may be caused by the lack of brake fluid in the brake system, or it may be that there is air in the brake system line, and it is recommended to check the brake fluid after this situation. The braking system is an important system in the car, and the braking system is related to the driving stability and safety of the car. >>>More

5 answers2024-08-05

There are 6 reasons for abnormal noise when braking:

1. Inferior quality brake pads: brake pads made of hard materials will hear abnormal noises when braking, and will also damage the brake discs. You need to go to a regular 4S shop to replace the original brake pads. >>>More