How to save fuel when driving a brake bus, and how to step on the brakes to be the most fuel efficie

Automatic or braking? I don't save much oil.

1. Correct braking steps: release the accelerator, use the engine drag to slow down, put your foot on the brake pedal, and press the brake until the vehicle stops.

Second, the emergency braking method, pay attention to the direction of stability, and vigorously press the brake pedal. Emergency braking will affect the braking, suspension, and transmission of the vehicle, and it is easy for the occupants of the car who are not wearing seat belts to collide with the items in the car, and only as a last resort.

The ABS system can ensure the stability and direction controllability of the vehicle during emergency braking to the greatest extent, and may start during emergency braking and cause the vibration of the brake pedal in the car.

Third, for the braking method, parking skills introduction, pay attention to grasp the priority of the brake:

1. When the speed is fast or the braking distance is short, the braking force should be greater, and the braking force can be smaller when the speed is low or the braking distance is long.

2. Try to avoid emergency braking, the feeling of braking slowly fades, that is, the strength of the brake pedal is slowly weakened.

3. When the braking force is strong, in order to avoid nodding before the vehicle stops, you can release the brake pedal at the moment when the vehicle is about to stop, and then slowly press it to stop the car steadily.

Rapid acceleration and hard braking are all bad problems that directly increase fuel consumption. Many people drive not far away, only staring at the movement of one car in front of them, not paying attention to the situation of the first few cars, and not paying attention to the sides. The city should often wait for the traffic light, the experienced driver sees that the front is a red light when the general first reduce the fuel, let the speed slow down, wait for the car to slide to the light and then lightly step on the brake to stop, and some drivers are often slamming on the brakes, like this unnecessary braking times, fuel consumption will inevitably increase.

With Bioluxe nutrient solution, fuel consumption can be reduced and carbon deposits can be removed.

A fuel-saving trick in the era of soaring oil prices.

1. Increase the air pressure of 4 wheels to reduce friction.

2. Clean the trunk, take away what you can put home, throw away the useless, and reduce the weight.

vehicle speed, as little as possible to step on the DAO brakes; I saw the traffic light from a distance, and the loose throttle used inertia to slide past (it is forbidden to pick up the neutral gear), and stepped on the red light at the intersection, and the green light gently refueled and walked, and it was safe, because the speed was slow, the eyes were enough, and the observation was sufficient. All in all, the automatic transmission car is fuel-efficient, and friends who sit in the car will feel that the driver drives very softly and not violently. In addition, the more economical the brake pads, the longer the service life and the more fuel-efficient.

1。Guarantee safety under the premise bai, du

Use brakes as little as possible. Therefore the speed is not zhi

It can be too fast, and it can't be too close to the car. Looking back at the provincial highway, those who frequently flash the brake lights are either novices or have a quick temper. 2。

Try to drive in the highest gear on flat roads. In general, the gearbox computer, the easy throttle will be upshifted. I can generally go up to 4th gear (the highest gear in the car) within 100 meters after starting, see that the speed is almost loose, and then refuel after jumping, and jump to 4th gear in a few clicks.

3。Do not use neutral coasting, which will make the gearbox unlubricated and dissipate heat, and affect the braking performance. At faster speeds (e.g. 50 km/h) it is indeed more fuel-efficient than coasting in gear, and many of the high-speed high-speed shifts are coasting in a manual gear, but remember not to use the automatic gear.

Unless in one case, your car's fuel tank is depleted, and it's not clear how far ahead there is a gas station. In this case, it is most economical to turn off the ignition and slide, remember not to use it until the oil will run out. Because after the ignition is turned off, the brakes are only useful for the first foot.

Try to move forward as quickly as possible. Don't be fast and slow.

The speed should not exceed 80km, 60 to 70 is the best, do not turn on the air conditioner, open the window if you feel hot, don't pull too heavy things, stop for a short time to hang N gear, and stop for a long time to hang P gear, so that in addition to being good for the gearbox, it can also effectively reduce fuel consumption, start the car to warm up first (that is, let the engine run in the idle state for a while), although it is summer now, but it is also necessary to warm the car in winter, the warm car time should be relatively long.

I also drive in automatic transmission, and what I listen to my riders teach is: warm up the car for 20 seconds before starting in the cold car; Don't slam on the accelerator when starting and accelerate sharply; When waiting for the red light (or parking for a while), the moment the car flicks the throttle to 2nd and 3rd gear (this is for me to look at the speedometer) ......That's all I can think of.

This question is a very old debate in theoretical and even practical circles.

From the current slightly accepted theory, the same brand, the same model, the same displacement of the car general manual transmission is slightly less fuel than the automatic transmission. But it is not absolute, there are many factors in fuel consumption, road conditions, oil quality, driving habits, car conditions, etc., many aspects affect the fuel consumption of the car.

What we can pay attention to is that first of all, when choosing a car, try to choose those cars that are really more fuel-efficient in practice; Then it is to go to a regular gas station to refuel, and to meet the label, you must pay attention!! It doesn't have to be fuel-efficient if the car burns good oil!! Only the right oil is fuel-efficient, because the compression ratio of each car is different, and the compression ratio determines what grade of oil you want to add!!

Then pay attention to the maintenance of the car, so that the car has a good condition, in order to achieve the most reasonable and perfect driving environment, and even to achieve the purpose of fuel saving; Finally, it is necessary to try to develop good driving habits, a good driving habit can make you save fuel to achieve twice the result with half the effort, such as the general person's big throttle, big brake habits, this habit not only consumes fuel, but also great damage to the car, for example, when it is hot, open the window to run at high speed, and do not turn on the air conditioner, in fact, it is also incorrect, some people have made statistics, in the hot day to close the window to open the air conditioner than to open the window fuel consumption is significantly lower, because the window increases the wind resistance of the car. And so on, many of the likes that we usually think are fuel-efficient are actually contrary to the purpose in many places.

There is a difference between infinitely variable and automatic transmissions.

Women's scooters are typical of infinitely variable gear, running without gear.

Although the automatic car is about the same as the continuously variable gear, the automatic transmission has a gear, and the gearbox will automatically delay the timing of the shift when starting and keep the throttle heavy to obtain a long-term high-power output, and the car will increase the speed of the car by increasing the high rev of the engine in the low speed gear, and the speed of the transmitter is higher and the load is increased. If you release the throttle at the right time (e.g. 2000 rpm) and then refuel, you will find that the gear is raised by one bit and the revs are reduced. This reduces the load on the engine and saves fuel.

Another point, don't press the throttle too hard, the gearbox will automatically shift gears at the ideal time to change gears when you press the throttle slowly, saving fuel and car.

This is the difference between infinitely variable and automatic, and the fuel-saving way to continuously variable is to throw it away.

The automatic transmission car should use each gear reasonably, make full use of the torque of the engine, and do not just put the gear on D when moving forward. Just like manual work, don't slam on the accelerator and brake suddenly, being gentle will definitely save fuel.

It should be right, this operation can make the oil circuit smoother, and this operation allows the engine to fully burn gasoline to avoid insufficient **. Don't you notice that slamming on the accelerator to exhaust smoke is very large, which is that gasoline does not burn enough.

When you get on the car for the first time every day, as soon as the fast idle speed drops, you start;

Slow down the throttle, and when the water temperature rises, it will gradually accelerate;

Try not to brake suddenly, a lot of gasoline work will be in vain, and the car will be expensive;

The speed of 80 per hour is the most fuel-efficient;

Don't swim in the river, walk more;

Minimize the load in the vehicle;

If it should be maintained, it will be repaired, and it will be repaired, saving fuel and cars.

Changing the box bar, manual wave.

Good driving habits can help you save a lot of money on fuel, so in addition to planning your driving route, avoiding traffic jams as much as possible, and reducing the weight of your car by reducing the weight of your car by reducing things that are not commonly used in the trunk, car owners also need to pay attention to the following points before setting off.

1.Start softly, lift the throttle lightly, and don't accelerate sharply, slow down sharply, or rush to the air, or you will add extra fuel.

2.Reduce the use of braking, and then when passing through intersections and downhills, lift the accelerator in advance, which is the natural deceleration of the car;

3.Reduce idle state, especially when running the air conditioner for long periods of time and at idle state, which consumes more fuel;

4.The economic speed of the general car is 60 kilometers per hour to 80 kilometers per hour, and it is very fuel-efficient when the car runs at the economic speed;

5.Under the conditions of ordinary road surface and suitable temperature, the air conditioner should be turned on as little as possible, but it is not advisable to turn off the air conditioner at high speed and open the window for ventilation, because the wind resistance consumption after opening the window is more than the fuel consumed by the air conditioning system;

6.Stop and turn off the engine at the right time, if you don't drive for a few minutes, the amount of fuel consumed will exceed the amount of fuel consumed by a start, and the timely shutdown can not only save fuel, but also protect the environment without emitting exhaust gases, which is really a double win;

7.Shift gears quickly and quickly, especially when driving on slopes, the shorter the shift time, the more fuel will be saved, and it is particularly fuel-intensive to withstand high-speed and long-distance driving.

The car travels at a certain speed with the least fuel consumption, and this most fuel-efficient speed is called economic speed.

Different models drive under different loads, different driving resistances and different gears, and have different economic speeds.

Cars all have their own "economic speeds", which are generally designed to be between 70 and 90 km/h.

Method:

Turns softly and smoothly. When you need to slow down, you can use the engine braking to reduce the speed of the vehicle, release the accelerator, shift into low gear, apply the brakes slowly, and finally press the clutch.

Try to park the car in a cool place, if you have to park in the sun, do not turn on the air conditioner immediately after driving, you should first open the window, let the flowing air take away the heat in the car, and then turn on the air conditioner, which is more fuel-efficient.

Alternate use of internal and external circulation. When using the internal circulation, the refrigerant of the air conditioner continuously takes away the heat of the air in the car cab, and the heat of the relatively closed space is easy to take away, and the working time of the compressor is short, and when the external circulation is used, it can ensure that the relatively fresh air from the outside enters the car.