The hard disk can t be read, the hard disk can be recognized, but it can t be read.

1. Check whether the computer recognizes the SSD.

Restart the computer, continuously click the F12 or F11 or F9 or ESC boot hotkeys on the keyboard during the boot process, and check whether there is an SSD that has been added in the listed boot list.

If not, it is recommended to re-plug the SSD after shutting it down for testing.

2. Normal phenomena that have been identified but not displayed.

1. After entering the system, press the windows+r key combination on the keyboard;

2. Open the "Run" box, enter and click "OK" in "Run";

3. Open the "Disk Management" interface, if the "Initialize Disk" prompt appears, see Step 3.

4. If the "Dormant Partition" or "OEM Partition" shown in the following figure is displayed in Disk Management, it indicates that the SSD has been recognized. Just because of the installation of SSD acceleration software, it is normal that the partition drive letter does not appear in the drive letter of the explorer, and this partition is not used for personal data storage and does not need to be debugged.

3. Some friends will store very important personal data in the mobile hard disk, but what should we do when we encounter a situation such as the mobile hard disk suddenly cannot be read, or the mobile hard disk is damaged and the data is lost? The following teaches you how to recover data from a hard disk to a mobile disk;

1. Choose a reliable data recovery software, I generally use [Hi Format Data Recovery Master].

2. Open the software, select [Disk Partition Lost Recovery] on the main interface, and then follow the prompts!

1. Do not turn off the power during the data reading and writing process of the hard disk.

2. Pay attention to dustproof and keep the operating environment clean and hygienic.

3. Prevent the hard disk from being vibrate.

4. Control the temperature to prevent the influence of high temperature, humidity and magnetic field.

5. Organize the hard disk regularly.

6. Prevent computer viruses from damaging the hard disk.

Summary. Hello, glad to answer for you :

Based on your description, you can try something like this:

Open "Start" "Administrative Tools" > "Computer Management", select "Disk Management" on the left side of the computer management window, and the disk device with the same capacity as the portable hard disk will appear on the right side of the window. Right-click on the newly discovered "Good (Active)" device icon, select "Change Drive Letter and Path", then click "Add" in the pop-up window, select the drive letter from the combination drop-down menu on the right side of the window (if H is selected) and confirm, and the system will automatically add the removable storage device.

The hard disk is recognized, but it cannot be read.

Hello, we are glad to answer for you: according to your description, you can try the following methods: open "Start" "Management Tools" "Computer Management", select "Disk Management" on the left side of the computer management window, and then the right side of the window will appear as the "Good (Active)" disk device with the same capacity as the portable hard disk.

Right-click on the newly discovered "Good (Active)" device icon, select "Change Drive Letter and Path", then click "Add" in the pop-up window, select the drive letter from the combination drop-down menu on the right side of the window (if H is selected) and confirm, and the system will automatically add the removable storage device.

As for the data, if you don't want the data, if it is important to find a software to recover the data online, I recommend Xi'an Junwang Data Recovery Center.

I hope mine can help you and have a great day

Yes. You can try doing this:1

Right-click the computer (computer) and click [Manage] to open it. 2.Click [Disk Management] on the left to open it, and find the portable hard disk on the right.

3.Right-click the mobile hard disk, select [Change Drive and Path], and then click [Add] to add a drive letter to the mobile hard disk, and confirm that it is completed, so that the mobile hard disk can be displayed.

Not supported for the time being, you just follow the above process, is there any problem?

The workaround for not being able to read is as follows:

Operating Equipment: Dell laptops.

Operating system: win10

Operating procedure: DiskGenius software.

1. Connect the mobile hard disk that needs to recover data to the computer, and then run the diskgenius software.

2. Select the inaccessible portable hard drive partition and click the Browse Files tab on the right.

3. Select the partition where you lost data, and then click the Recover Files button, after which the Recover Files window will pop up.

4. Click the Start button to let the software perform a complete scan of the partition.

5. Preview the data in the scan result: Double-click the file will pop up a preview window to display the file content, so that you can easily determine whether the file is damaged.

6. Copy the data in the scan results to other disks to complete the data recovery of the mobile hard disk: check the desired data >> right-click the mouse >> select Copy to the specified folder. After the file copy is complete, open the destination folder and check whether all the recovered data is correct.

Once you're sure that you're okay with the files, you can format the inaccessible portable hard drive partition and copy the data back to the external hard drive.

The hard disk can't read out the solution:

1. The system does not find or cannot recognize the hard disk after booting

Solution: This kind of problem usually causes the system to fail to boot by the hard disk, even if it is difficult to let the computer recognize the hard disk after using other methods to start the computer, and the solution is very simple, because even if the current hard disk generally does not have the problem of motherboard compatibility, and the reason for this kind of failure is on the connection line between the hard disk and the motherboard, you can replace the connection between the hard disk and the motherboard, or take a look at whether the master and slave lines on the hard disk are set correctly, etc.

2. Improper BIOS settings cause problems with the hard disk

Solution: Such a problem is generally not a user's problem, mainly because the current motherboard uses the function of automatically detecting the type and brand of the hard disk, usually the user will not make any changes to this, but some motherboards may identify the type of hard disk when running, and this situation will also cause the computer to not recognize the hard disk. If you want to solve this problem, you need to follow the BIOS instructions of the motherboard and the situation of the hard disk itself to make the correct settings.

3. There is a master bootloader but the hard disk cannot be booted

Solution: I believe many people know that the hard disk has a master boot area, then the main boot area is faulty, the computer does not recognize the hard disk is also a very normal situation, then you want this kind of failure, then you need to enter the fdisk mbr command in DOS mode, this is because the fdisk command file itself already contains a hard disk boot program, but from the current situation, the system can not boot correctly There are many cases, there is no way to answer them one by one.

1. Poor contact of hard disk cable or hard disk interface: First of all, we can check the data cable and interface part, if the hard disk data cable is broken or aging, you can try to replace it to see if it can restore the identification, if the hard disk interface is oxidized, you can also wipe it with an alcohol swab.

2. Insufficient power supply: If the voltage is insufficient in the computer power supply, there will also be a phenomenon that the hard disk cannot be recognized, if the working sound of the hard disk is abnormal, you can first connect the hard disk to other computers for inspection, and then check the computer power supply system on the premise of determining that the hard disk itself is not faulty, if the voltage output is indeed too low, you need to replace the power supply with higher power in time to avoid more serious damage to the hard disk.

Of course, in view of this system failure situation, hard disk data recovery can be directly scanned and recovered with Super Rabbit data recovery software, and the operation only takes three easy steps to recover lost hard disk data, and Super Rabbit supports full disk fast scanning, retrieve accidentally deleted data and lost documents, preview the files required for recovery, and accurately recover important file data.