What should I do if the hard drive is HFS format? It s too annoying to not be able to read and write

HFS stands for Hybrid File System, which is the optical disc file system used by Apple's Mac machines, and does not support other operating systems such as DOS and Windows 9X NT.

HFS Apple Standard Format : The former Apple format, used by the early Mac OS. Its official name is the Hierarchical File System (HFS).

Systems that support HFS+ can read HDDs in HFS format, but HFS systems cannot read HDDs in HFS+ format.

HFS+: Apple Extended Format: This format is an improvement on Apple's original format, which has been used in later versions of Mac OS, and its file consists of two parts

A data fork is the data that can be used by an application, regardless of the file format; The resource fork includes semiformatted materials, such as images, graphics, etc. The dossier usually includes some additional information as well, such as:

When encoding, the information of the manufacturer (application) and the file type is added to the file. The operating system also uses this additional information to determine which image the file should be displayed in, or which application to open when the file image is double-clicked. The HFS+ file system also supports file aliases If you install Mac OS and later systems, be sure to format it into HFS extended format.

The selected format is formatted.

I'm all using NTFS format for mobile hard drives, and then install NTFS for Mac on Mac..

You may need to format it carefully.

I'm the same, how can this thing be. Couldn't find a workaround.

Method 1: Read and write MAC OS partition under Windows, you can use MacDrive Pro 9 software, this software not only supports direct file reading and writing to the HFS+ partition established by MAC OS under Windows, but also supports formatting of HFS+ partition disk under Windows.

Method 1: **Partition software: Partition Assistant Tachibana Bang He Professional Edition Create a partition for the mobile hard disk first, and then reformat it into NTFS format, if you want to be recognized in Apple and Windows7 computers, it is recommended to format it in EXFAT format.

Apple's system is installed on a hard drive with a partition format of HFS.

Windows can only recognize HDDs with FAT and NTFS partition formats, and cannot read or write HFS HDDs. Therefore, it is necessary to use third-party software to help Windows read and write HFS format hard drives. You're talking about the most commonly used software, after installing MacDrive on the Windows system, you can read and write HFS format.

Allow the Windows system to read the contents of the Mac disk.

The "direct formatting" data is gone, and if you still want the files inside, then ......Convert doesn't recognize HFS partitions at all, Convert is for FAT fat32.

There's no convenient way to do it, you can just use MacDrive all the time, or if you want to make it easier later, just copy the files inside, then reformat the portable hard drive to NTFS, and then copy the files back.

In any case, it is not possible to convert the file to NTFS file system format directly if you want to keep it in place.

To convert HFS to NTFS, you can try it with the method "Convert X: FS:NTFS", even if it is a portable hard drive!

However, to be on the safe side, it is better to back up the useful things in the portable hard drive first. If the conversion fails, just format the portable hard drive and restore the backup to the external hard drive.

1.Click Start All Programs Attachment Command Prompt (this is a built-in DOS-like interface in Windows XP, and all the internal instructions are the same as those under DOS).

2.When the window appears, type "convert x: fs:".

ntfs" and press Enter. Notice that there is a space after "convert". Here x:

That's the drive letter you want to convert, and converting f drive is f:

3.You will then be asked to enter the label of the F drive and press enter. This makes it easy to convert the partition pattern to NTFS. This method is only used to convert FAT32 to NTFS, not to FAT32.

On Mac OS X, partitions in the NTFS file format (called volumes on Mac) do not have write permissions, only read permissions. If you want to write to a partition in NTFS file format, it is very simple, but it is dangerous, and if you don't succeed, you may lose even the permission to read the NTFS file format. The first way is to install Macfuse, which is extremely dangerous, and so far, there don't seem to be as many people who have succeeded as there have been failures, so it is not recommended to install this software, and it is definitely not recommended for novices to try this software rashly; The second option is much safer, but be prepared to fail! Install the paragon software, after installation, restart it to read and write the NTFS file format volume, but if it is not successful, there will be a paragon folder in the application folder, which contains the uninstaller program, please run that program to uninstall paragon, instead of directly dragging the paragon folder into the Trash or using a program uninstaller such as appzapper to try to uninstall.

Don't know which software you have installed?

If you want to read and write, you must convert the hard disk to HFS format.

Also, if Windows wants to read and write Mac's disk, you need to use MacDriver

If your Mac wants to read or write Windows files, copy the files to an HFS disk.

If you want to read and write to the Mac system under XP, you can install a software MacDrive, which is how I solved it.

NTFS is the partition format commonly used in the Windowns system, compatibility and functionality are more stable and reliable, HFS is generally a special partition format used by Apple computers, there is no specific comparison between the two, just for the system architecture and hierarchical system, mainly depends on the device situation!

HFS has been completely thrown out of the equation and can be compared to FTFS, which is FAT32

The two partitions are for different computer operating systems; HFS+ is Apple, Mac OS and later versions will start to use this format, NTFS is used by the Windows operating system, all of which are for hard disk formats, there is no good or bad, depending on which machine you use it in.

Right-click on My Computer --Management --Disk Management.

See if your plate is in it.

If you are in, change the drive letter, and if you can't see it, the format doesn't match and you can't recognize it.

2. After opening the diskpart tool, there will be a window;

3. Enter list disk in the window and press enter, the disk information of the current system will be listed;

4. Use the select disk command to select the disk that needs to be modified, that is, disk 1, diskpart > select disk 1;

5. Then execute the clean command, if there is an error, execute it several times;

6. Right-click on disk 1, select the "Change drive letter and path" option, and add a disk symbol to the U disk to use.