Which is the length of the electrostatic precipitator with electromagnetic vibration on the top, the

Whether the bottom frame of the anode plate of the electrostatic precipitator is in the positioning groove, if the anode plate is deformed, it should be corrected, there should be no debris between the poles, if there are debris, it should be cleaned up, if the clamp is not firm, it should be corrected or replaced, and the suspension point should be firm and reliable.

If the anode plate of the electrostatic precipitator is seriously dusted, the process personnel should be contacted to turn on the rapping system for rapping or rinsing with water, and if the anode plate frame is not in the positioning groove, it should be moved to the positioning groove with a crowbar or wrench.

Electrostatic precipitator anode plate integrity inspection: check the bending of the anode plate by visual inspection or wire pull method, and check the corrosion and electrical corrosion of the electrode plate at the same time.

Electrostatic precipitator accessories.

<>1. The main contents of the electrostatic precipitator plate line maintenance:

1) Comprehensive cleaning and inspection of the electric field;

2) Replace the deformed and corroded anode plate;

3) Replace the corona wire that cannot be trimmed or broken;

4) Adjust the discharge electrode frame and pole spacing;

Second, the content of the overhaul of the electrostatic precipitator:

1. Dismantling and maintenance of rectifier transformer of high-voltage power supply equipment;

1) Reactor dismantling and maintenance;

2) Transformer and reactor insulating oil withstand voltage test; Measuring insulation resistance;

3) High-voltage isolation nine gates and operating mechanism;

4) Cleaning and inspection of high-voltage leads, damping resistors, insulating sleeves, heating elements and all insulating parts;

5) Cleaning and inspection of rectifier transformers, reactor externalities, damping resistors, leads, contact wires, support insulators, etc. in the high-voltage room;

6) Preventive test of high-voltage DC cable;

7) Cleaning and inspection and instrument calibration of various components in the high-voltage control cabinet and instrument control panel;

8) Rectifier device protection inspection and safety locking device maintenance;

9) Dismantle and overhaul the ventilator in the control room, and inspect the ventilation system;

2. Low-voltage electrical equipment.

1) Low-voltage switchboard maintenance, relevant components value verification;

2) Replacement and maintenance of rapping and heating distribution boxes;

3) Dismantling and overhaul of all motors;

4) Rapping and ash unloading system, signal loop and component cleaning and inspection, rapping program, heating automatic control component inspection and calibration;

5) Operation, power cable inspection, insulation resistance measurement.

3. Mechanical part.

1) Comprehensive cleaning and inspection of the electric field;

2) Replace the deformed and corroded anode plate;

3) Replace the corona wire that cannot be trimmed or broken;

4) Adjust the discharge electrode frame and pole spacing;

5) Replacement or repair of vibrating hammer head and anvil iron;

6) Dismantling and overhaul of motor and reducer;

7) Inspection of the wear and tear of the deflector plate and the airflow distribution plate and the installation position;

8) Check whether the shell and pipeline system have dust, wear and corrosion, so as to replace, repair and reinforce;

9) Replacement and repair of ash unloading system;

10) Replacement or repair of ash hopper heating device and insulator chamber hot air system.

In addition to the structure of the dust collector, the reasonable ash cleaning capacity of the electrostatic precipitator vibrating hammer also requires the dust collector to vibrate and clean the ash with a large force. There are two main ways of rapping and ash cleaning: electromagnetic rapping and mechanical rapping, the former has the advantages of simple structure, convenient maintenance, small size and low cost of electrostatic precipitator; The disadvantages are that the mass of the vibrated body is large, the ash cleaning force of the vibrating is small, the air leakage rate is high, and the secondary dust is large.

When the dust is viscous, especially in a large dust collector, the ash on the plates and pole lines will not be cleared, which will affect the dust removal efficiency.

Since the bearing is fixed on the cathode system component with negative high pressure in the cathode rapping dust, an electric porcelain shaft for insulation is connected to the end of the cathode rapping shaft in series to isolate the high voltage. When the vibration is put into operation, the cathode and anode vibration in the same electric field cannot be beaten at the same time; The front and rear electric field anode (cathode) vibration cannot be struck at the same time; The final electric field anode rapping and the groove plate beating cannot be struck at the same time.

Electrostatic precipitator.

The top rapping device of the electrostatic precipitator is arranged on the top of the electrostatic precipitator, the anode plate or the cathode line.

The rapping acceleration obtained on .

The distribution is large and small, consistent with the ash cleaning requirements of the anode plate and cathode line, and the direction of the top rapping force is consistent with the axis direction of the pole line.

Principle of electrostatic precipitator top electromagnetic hammer vibration:

When the coil is energized, a magnetic field is generated around the coil, and the rapping rod is lifted under the action of the magnetic field force, and when it reaches a certain height, the coil is de-energized, the magnetic field disappears, and the rapping rod falls freely under the action of gravity, hitting the beating rod, and the beating rod transmits the beating force to the electrostatic precipitator.

The internal cathode and anode system or airflow distribution device can achieve the purpose of vibrating and cleaning the ash.

When the coil is energized, the coil is charged and magnetized, the beating rod is lifted under the action of electromagnetic force, and when it reaches a certain height, the coil is de-energized under the program control, the electromagnetic force disappears, and the beating rod falls under the action of gravity, and the beating rod is struck by the vibration.

The principle of the yin-level political party of the electric city Fuding Department is generated by the vibrating rod, and the intensity can be adjusted according to the size of the vibration at this time.

Electrostatic precipitator is mainly carried out by using the law of interaction between electric charges, through the positive and negative electrodes that make the dust electrified, and then what? The mutual attraction between electric charges or charged bodies can attract small and light objects, so that the objects can be adsorbed on the substrate, and then collected by vibrating.

He said that the electrode discharge process is used, and then electromagnetic induction is used, relatively speaking, there is no problem or anything, and the effect is relatively good.

The principle of cathode vibration at the bottom of the electric vacuum is mainly to say that in the process of vacuuming this TV, the law of interaction of electric charges is used, so through the attraction between the nail charges of the electromagnet, the dust of these light objects will come up, and then through the way of vibration, the dust will shake off into the grassroots river.

When the coil is energized, the coil is charged and magnetized, and the beating rod is lifted under the action of electromagnetic force, and when it reaches a certain height, the coil is de-energized under program control

It is an electric principle, which generally absorbs oxides through cathodic protection, and this function is achieved through this.

The sponsorship of the top of the electrostatic precipitator, the principle of cathode vibration can be customized through the principle of his absorption, so the principle of its absorption is ordered to Hunchun.

The principle in it, in the process of working, should be able to rely on the needle on the top of it to vibrate.

What is the principle of cathodic vibration at the top of the electrostatic precipitator, I think it should be the engine in it working, and this is a relatively good product, its degree of cleaning is still very high, so now many people like him very much.

What is the principle of cathode rapping on the top of electrostatic precipitator? It may be that there is dust in the drilling work, so you should wear a mask to avoid bacterial contamination in time.

His main thing is power washing to produce suction, so the effect is still good.

The reason for this top cathode vibration is also the cause of the vibration, and it is also how it works.

Electrostatic precipitator uses anion and cation separation, and then uses the principle of cardinal beating to be very fall into the belt.

In the case of electric dust removal, it is actually to clean up the dust by means of static electricity.

As long as it depends on the specific situation, under normal circumstances, it uses static electricity and battery induction, so you must pay attention to this aspect, so that you can do it.

The principle of electrostatic precipitator emergency injection is the electromagnetic principle.

It works by connecting two sides.

Physical knowledge of the method of electrostatic precipitator, after the machine and equipment are energized, open the normal connection.

Here are some of the principles of the top of the machine that are specific ways, where there is a specific working principle process.

Through some projects, it turns out that this can be used for Q&A exchanges, so the effect is very good at this time, and it is very good.

What is the principle of electrostatic precipitator top emergency town work I don t understand you or.

There are a lot of principles for the top cathode party of electrostatic precipitator, and the working principle is also very good, especially in the way.

You open the manual, and the manual explains what it is like and how it works.

How does the principle of cathode rapping on the top of the electrostatic precipitator work? You'll have to ask a professional about this.

In terms of the whole principle of electrostatic precipitator, the working principle is actually on its manual.

The principle should be a principle of its cycle, an inner loop from top to bottom.

The top of the electrostatic precipitator is because of how it works, and the reason why it works is because of the electricity.

How does the principle of electrostatic precipitator top emergency treatment work? You should consult a teacher who understands physics.

The anode plate is the core component of the electrostatic precipitator, and the acceptance criteria of the anode plate are: straight, high strength, strong stiffness, and not easy to twist.

How the anode plate works.

The anode plate is connected to the cathode line of the high-voltage DC power supply and the grounded anode plate to form a high-voltage electric field, due to the corona discharge of the cathode, the gas is ionized, the negatively charged gas ions, under the action of the electric field force, the sunny plate moves, and the dust particles collide with the dust particles in the movement, then the dust particles are charged with negative electricity, and the dust particles after the charge are also moved to the anode under the action of the electric field force, and after reaching the anode, the negative charge is released, and the dust particles are deposited on the anode plate, and the purified gas is discharged out of the dust preventer.

The answer is right in front of you: dusting.

If you need this product, it is recommended that you consult Tongming dust removal, they have been doing dust removal equipment for many years, and their reputation is very good

An important part of the electrostatic precipitator, if you are interested, you can consult "Tongming Dust Removal" Professional dust removal equipment for many years, rich experience, product quality, CCTV list brand trustworthy