What things do I need to pay attention to after the newly bought refrigerator is directly powered on

If you buy a new refrigerator at home and use it directly, there are many things you need to pay attention to, otherwise it will cause some damage to the new refrigerator. For example, after the refrigerator is powered on, it should be prohibited for two hours, and the inside of the refrigerator should be unplugged and cleaned. <>

It is forbidden to use it for one or two hours.

It must be stationary for two hours after the new refrigerator is powered on, so it is forbidden to use it for two hours. Within two hours of stationary operation, the refrigeration oil of the refrigerator will reset back to the compressor, which can also ensure that the compressor is in good condition and avoid burning out the compressor. Moreover, the refrigerator can reach the set temperature after two hours of power-on, and then put the food in, it will not increase the workload of the refrigerator, and it can also save electricity, so the newly bought refrigerator can not be put food immediately after being powered on, which is also a major taboo for the newly bought refrigerator.

It should also be noted that the newly bought refrigerator should not be overloaded when it is directly powered on, because the moving parts of the refrigerator need to be run-in, so the power supply should be 220 volts and the voltage is 50 Hz single-phase AC power supply. <>

2. Unplug the power to clean the inside of the refrigerator.

After the newly bought refrigerator is directly powered on, although the appearance looks very bright and clean, in fact, the inside is relatively dirty, because the new refrigerator is often directly transported from the refrigerator factory to everyone's hands, so after the power test of the newly bought refrigerator, you can unplug the electricity, and then clean the dust and bacteria inside the refrigerator, so as to ensure that the food put in after the fire is safe. When cleaning, you can also wipe the inside of the refrigerator with some vinegar, and then open the refrigerator door in a cool and dry place to let the vinegar taste and moisture come into play, so that you can get a very clean and pollution-free refrigerator. <>

Finally, after using the newly purchased refrigerator, it is recommended not to let the food flow out when storing food, such as milk or drinks, and do not let it be upside down, otherwise it is easy to stain the inside of the refrigerator, thus making the newly purchased refrigerator become an old refrigerator. Also, clean the inside of the refrigerator on time.

It should be noted that there should not be too much moisture in it when it is used with electricity, and it should be noted that there should not be too much food placed, and that it should be defrosted in time, that the inside should be cleaned, and that things should be placed after 24 hours.

First of all, pay attention to the cleaning of the inside of the refrigerator and do not let too much water in the refrigerator. The second is that it is best not to put food and other things in it immediately after the power is turned on, and it is better to put it in after the internal refrigeration. Refrigerators that have just been powered on need to be cooled first because they have not been used for a long time.

It should be noted that the refrigerator can not be too close to the wall, the refrigerator should be comprehensively inspected, and it can only be officially used after cleaning.

It is necessary to pay attention to the use of the refrigerator, do not plug it in immediately, pay attention to the inspection of the refrigerator, pay attention to the leakage situation, do a good job in the details, and pay attention to the use after power-on.

How many hours must the refrigerator be left for a few hours before it can be powered on? This everyone's time is not uniform, there are different versions of 1 24 hours, in short, the shortest must be powered on after 1 hour! Why is that?

The new refrigerator cannot be used immediately. The most important thing is that there is cold coal in the new refrigerator, and it is inevitable that there will be shaking in the process of handling, and when the refrigerator is in place, it is necessary to let the cold coal in the refrigerator settle and stabilize before it can be used, otherwise the new refrigerator is easy to be damaged and malfunction. Because the refrigerant inside will flow backwards when handling the loading and unloading truck, it is necessary to precipitate the refrigerant after putting it in the position, and the refrigerator cannot be put down from the factory to the transportation!

Including the refrigerator freezer I pulled up, it was all placed head up.

<> understand these two points, it is not difficult to find that it is impossible to ensure that the inclination does not exceed 45 degrees in the normal handling process of the refrigerator, and once it exceeds this angle, the lubricating oil in the compressor will flow in the refrigeration pipeline with the refrigerant. In the process of handling, the bumps and tilts, resulting in the lubricating oil free from the bottom, if it is opened immediately, the running parts can not be lubricated enough to cause wear, which will shorten the service life of the compressor, so it is recommended to leave it at home for 3-4 hours and then open it is the most suitable.

There are two reasons, during transportation, due to bumps, movement, etc., the lubricating oil in the refrigerator compressor is easy to flow backwards into the return pipe and evaporator, or in the cylinder, and let the lubricating oil automatically flow back into the compressor for 5 hours, so that the refrigerator can be refrigerated normally. During the transportation of the refrigerator, it may be placed on its side or upside down, so that the refrigeration oil will flow along the refrigeration cycle to the evaporator or condenser; The operation of the compressor is prone to oil shortage. The delivery master said that it was to let the freon refrigerant sink completely and the refrigerator would work.

The newly bought refrigerator should not be directly powered on, it should be left for another 24 hours before being powered, and then put things in it after 24 hours of power, not too much.

If you buy a newly bought refrigerator, the behavior will shake the refrigerator when you are transported, so let it stand for about 4 hours, open the refrigerator to get through the smell, and then turn on the electricity to use it normally.

Check all parts of the refrigerator before using it, and never use it immediately.

We know that refrigerators come with an instruction manual when you buy them, so you should read the instructions carefully before using them and check the various parts of the refrigerator. For the new refrigerator purchased because it is a closed packaging may have odor, it is best to open the door to ventilate before use in order to dissipate the odor in the refrigerator, and the newly bought refrigerator should be placed for 12 hours before use, because the refrigerator may be tilted during handling, which will lead to the reflux of liquid inside the refrigerator, so it can be used only after standing.

Can the refrigerator I just bought be powered right away? What are the disadvantages of doing so?

The refrigerator you just bought should not be plugged in immediately, so the main reason is to better maintain the refrigerator. The core content of the refrigerator is the refrigeration compressor, which can circulate the system with the refrigerant in the refrigerator, and then have the actual effect of cooling. In order to ensure the quality of the refrigeration compressor and maintain good characteristics, it is sprinkled on the bottom end at the beginning"Refrigeration oil", that is, grease.

It not only has the effect of moisturizing the refrigeration compressor, but also prevents the leakage of refrigerant in the air conditioning compressor. Normally, when the refrigerator is not plugged in, the grease is very well stored at the bottom and is only removed when it is running; When it is stationary, it flows to the bottom.

Under normal circumstances, the refrigeration compressor at the bottom of the refrigerator is usually coated with a layer of refrigerant oil. This layer of oil is mainly used to moisten the refrigeration compressor and reduce the damage of the refrigeration compressor in the work. In the case that the refrigerator has just returned to everyone's home, because of the long-term shaking and transportation, the freezer compressor is likely to be poured into the refrigerator, so if we turn on the switch power of the refrigerator at this time, it will definitely harm the use of the refrigerator, and the more serious will cause damage to the refrigerator.

Therefore, the newly purchased refrigerator cannot be plugged in immediately, and must be left static for a period of time before it can be applied. If you don't use the refrigerator urgently, it is best to let it stand for 8-12 hours before turning on the power to allow the oil to flow back to the bottom end, which is more beneficial to the refrigerator. In addition, the professional also told me that after the newly plugged refrigerator is plugged in to switch on and off the power supply, it is not necessary to disconnect it casually unless it is necessary, otherwise the embedded refrigerant will corrode the hose, and the adverse effects are unpredictable.

If the refrigerator is not used for a long time, you need to unplug the power cord to remove all the ingredients inside to prevent mold and eventually melt the ice. When melting ice, it is not necessary to use sharp special tools to prevent damage to the condenser; Scrub with a dry rag from the inside out, and when the refrigerator is dry, take paper or other items and put them in the gaps; The part of the refrigerator should have good exhaust air, no need to return moisture, and prevent sunlight; In order to ensure the regular application of refrigeration compressors and increase the service life of refrigeration compressors, it is best to check the refrigerator once a month and turn it off after half an hour or an hour. Therefore, we have to wait for a period of time after the refrigerator is shipped home, waiting for the refrigerator's oil drain to be repaired to its previous part, so as to ensure that the refrigerator is not destroyed.

Also, don't forget to give your refrigerator a thorough cleaning. After all, the refrigerator has just been bought home, and the surface layer will inevitably adhere to stains and dust, wipe it to make the refrigerator more tidy and comfortable to use.

No, the so-called power is turned on after two hours of standing, which means that the refrigerator we purchased cannot be directly powered after it is placed at home. In fact, the main reason is the lubricant that appears in the refrigerator refrigeration system.

Caused by lubricating oil in the refrigeration system of the refrigerator. The compressor operation of the refrigerator needs to be protected by lubrication, so the entire motor system is protected.

This kind of system is filled with a certain amount of lubricant and is in a closed system. : In the process of promoting the transportation of the refrigerator after leaving the factory, it is difficult to avoid the refrigerator being subverted, tilted and so on.

In these cases, the lubricant can flow down the line into the heat exchanger coil. It is also possible for a small amount of lubricant to be poured into the compressor chamber, which is what we call the cylinder. In this case, if the machine is started directly, the lubricant line will block the flow of refrigerant.

There may also be a pneumatic cylinder as an alternative to compression. Therefore, it will seriously affect the process of running the refrigerator.

The refrigerator that I just bought can't be powered right away; It also makes the refrigeration effect worse, the service life is shortened, and the operation of the compressor is not effectively protected.

Of course not, you need to leave it for a period of time to get used to the environment at home before you can turn on the electricity. It will cause the refrigeration effect of the refrigerator to not be particularly good, it will also cause the temperature of the refrigerator to decrease, it will cause the heat dissipation outside the refrigerator to be not particularly good, and it will also lead to some failures in the refrigerator, which may cause the motor of the refrigerator to fail.

First of all, check the power supply of the refrigerator, if the socket is installed with a ground wire, try not to use the plug of the refrigerator if there is no ground wire, but also check the circuit of the refrigerator, and let it stand for 2 or 3 hours after confirmation. After confirming that the power is on, do not overload the operation, and clean it in time.

Clean the refrigerator. After our refrigerator has been powered on for a while, if we are ready to put things in, then use a clean, damp cloth and carefully wipe the inside of the refrigerator. Trays like the side panels inside the refrigerator are scrubbed clean to ensure that there are no bacteria.

Only then can you put in food or fruit, etc.

We should also pay attention to the food put in the refrigerator, or fruits, vegetables, etc., must be clean and clean. Because the first time you put it, if it is not clean, some items that are not clean, it may cause our refrigerator to be contaminated. For example, raw fish, chickens and ducks must be cleaned before putting them in the refrigerator.

3.After 1 to 2 weeks of use, we should pay attention to scrubbing. The conventional practice is to use a rag dipped in water, and then wring out the water, basically using warm water, so that the rag we need is formed.

After that, scrub the whole thing. Ensure the cleanliness and hygiene of our refrigerators.

The newly bought refrigerator cannot be directly energized, and it is generally necessary to stand still at home for 24 hours before it can be powered on, which can make the refrigerator last longer.

The newly purchased refrigerator cannot be used immediately, and needs to be left to sit for some time, in order to allow the smooth oil in the cooling system to fully settle into the refrigeration system. However, this time does not need to be left for too long, only 2 to 3 hours can be placed.

Under normal circumstances, refrigerator manufacturers will put a certain amount of smooth oil in the refrigeration system and seal it inside, and the refrigerator is in the middle of the coil of the heat exchanger or flow into the cylinder of the compressor to hinder the refrigerant activity and cause the operation of the refrigerator to be paralyzed, so it should be placed for a certain period of time to allow the smooth oil to be completely precipitated and then powered on, and it will be safe. This time is not too long, it is normal, it only takes two to three hours, and it does not take a whole day or several days. In addition, special attention should be paid to the inclination of the refrigerator not to exceed 45 degrees during handling.

Because if the inclination is too large, it is easy to attract the telephone to detach from the lifting ring, and the compressor can not work normally, because the refrigerator compressor in order to reduce noise, its motor is designed to be suspended in the air by three hanging springs. If you carry it at an angle, it is easy to fall apart, so be careful.

It is impossible to ensure that the inclination does not exceed 45 degrees in the normal handling process of the refrigerator, and once it exceeds this angle, the smooth oil in the compressor will move in the refrigeration pipeline with the refrigerant.

In order to prevent problems and avoid problems at the greatest angle, ordinary delivery personnel will remind users that the refrigerator will stand for at least 2 hours after arriving at home and then power on the test machine, and contact the manufacturer's customer service department as soon as possible if any problems are found.