-
The number 7 indicates the coldest one.
1. Under normal circumstances, the thermostat of the refrigerator will be marked with 0 7, and the temperature of the refrigerator can be adjusted by turning the knob. Among them, the larger the number of the refrigerator thermostat, the colder its temperature, which means that the refrigerator compressor needs to continue to run at high speed, so it also consumes more electricity.
The gear is a shutdown gear, while the gear is a forced cold gear. When the temperature of the refrigerator hits the forced cooling setting, the compressor of the refrigerator will continue to work.
3. Therefore, when making digital adjustments to the refrigerator thermostat, you must pay attention. The refrigerator controls the temperature in the first gear at about 9, in the 3-4 gear control temperature at about 4-6, in the 5-6 gear control temperature at about 2-4, and in the 7th gear the temperature is about 1.
1) When the range of the refrigerator thermostat is 7 gears, it should be adjusted to 2-4 gears in summer, 4 gears in spring and autumn, and 4-6 gears in winter;
2) When the range of the refrigerator thermostat is 5 gears, it should be adjusted to 2-3 gears in summer, 3 gears in spring and autumn, and 3-4 gears in winter.
In general, the temperature range of the freezer compartment of the refrigerator is minus 4 - minus 24, and the normal temperature of the freezer compartment of the refrigerator is minus 18.
In everyday life, the temperature in the freezer compartment of the refrigerator should not be higher than minus 18. Because for psychrophiles, the growth will stop at minus 10 to minus 12; Some molds don't stop growing until minus 15 to minus 18.
-
Gear 1 is the highest, and Gear 7 is the lowest. It is easy to misunderstand this expression, and it should be expressed as follows: Adjust it to a smaller level in summer, increase it in winter, and adjust it in the middle of spring and autumn.
The old-fashioned mechanical refrigerator thermostat, most of which are 7 gears, should be adjusted according to the seasonal ambient temperature to adjust the size of the thermostat's digital gear, summer should be adjusted in the smaller digital gear (1-3 gear), spring and autumn should be adjusted in the middle of the gear (3-4 gear), winter should be adjusted in the larger digital gear (4-6 gear), keep the temperature of the freezer at about minus 18, the refrigerator between 1-10 degrees, and it is best to control between 4-8 degrees. It is recommended that users put a thermometer in the refrigerator to actually measure, if the temperature is too high, adjust the digital gear a little bigger; If the temperature is on the low side, turn the digital gear lower.
Of course, this is only for the four seasons of the area to adjust the use, if the indoor temperature of the refrigerator is like spring all year round, always adjust to the middle gear. When buying a new refrigerator in the future, it is best to buy electronic temperature control, and you don't have to worry about it if you adjust it at one time, which is simple and trouble-free, and the electronic thermostat has more accurate temperature control, and the temperature difference is smaller, which is more beneficial to the freezing and preservation of food. Especially the inverter refrigerator, the refrigeration is faster, the temperature difference is smaller, and the freezing and preservation effect will be better.
Because the mechanical thermostat controls the start and shutdown of the compressor by closing or separating the internal power contacts of the thermostat through the principle of thermal expansion and cold contraction. When the temperature in the refrigerated room rises to a certain atmosphere, the internal contact of the thermostat will push the power contact to close and conduct in the liquid thermal expansion in the temperature sensing tube, so that the compressor can start to work; When the temperature of the refrigerator room drops to a certain range, the liquid in the thermostat temperature sensor tube shrinks to separate the contacts, and the power supply of the compressor is cut off and stops working, so that the cycle is repeated to maintain the temperature in the refrigerator within a certain range.
Although the thermostat is in the refrigerator, the temperature of the freezer should also be taken into account. In summer, due to the high ambient temperature, the temperature in the refrigerator rises quickly, so it will cause the compressor to start work frequently, and the downtime will be shortened, so that the temperature in the freezer will drop very low, and the gear of the thermostat should be adjusted to reduce the increase in power consumption due to overload of the compressor; In winter, the ambient temperature is low, the temperature rise rate in the refrigerator is very slow, and the compressor is shut down for a long time, which will cause the temperature in the freezer to rise, so it is necessary to increase the digital gear of the thermostat to avoid the temperature of the freezer from rising.
If the thermostat is equipped with a winter temperature compensation switch, when the indoor temperature is lower than 12-15 degrees, the switch should be turned on (ON is on) to ensure that the compressor can start working smoothly; When spring comes, when the indoor temperature is higher than 12-15 degrees, the switch should be turned off (off is off) to avoid the compressor from starting work frequently, resulting in an increase in power consumption. Now the refrigerators are automatically controlled, so there is no such switch. If the compressor does not start working in winter, it is either caused by abnormal performance of the automatic control circuit or damage to the electric heating element.
-
The coldest gear. The refrigerator temperature control knob generally has 0-5 gears or 0-7 gears (under normal circumstances, 0 gear is the shutdown gear is the forced cold gear, when the forced cold gear is hit, the compressor is constantly running, and the refrigerator is in a non-stop state).
1. In the process of using the refrigerator, its working time and power consumption are greatly affected by the ambient temperature, so we need to choose different gears in different seasons to use. When the ambient temperature is high in summer, it should be used in the weak gear, and when the ambient temperature is low in winter, it should be used in the strong gear.
2. This is because in summer, the ambient temperature is higher (up to 30), if the temperature in the freezer room is in a strong block), up to -18 below, the temperature difference between the inside and outside is large, so the temperature in the box drops by 1 is very difficult, and furthermore, the loss of cold air through the box insulation layer and door seal will also be accelerated, so that the start-up time is very long and the downtime is very short, which will cause the compressor to run for a long time at high temperature, which will consume electricity and easily damage the compressor. If you change to weak gear at this time), you will find that the start-up time is significantly shorter, and the compressor wear is reduced, and the service life is extended. Therefore, when the temperature is high in summer, the temperature control is adjusted to the weak road block.
3. When the ambient temperature is low in winter, if the thermostat is still adjusted to the weak gear, so the temperature difference between the inside and outside is small, the compressor will not be easy to start, and the refrigerator with a single refrigeration system may also freeze in the freezer. Therefore, when the temperature is low in winter, the thermostat should be adjusted to high level.
-
The number 7 on the thermostat is the coldest.
In different seasons, different gears should be selected, and the refrigerator thermostat should be turned on in low gear in summer and high gear in winter. When the ambient temperature is high in summer, it should be used in the weak gear, and when the ambient temperature is low in winter, it should be used in the strong gear.
In summer, the ambient temperature is higher (up to 30), if the temperature in the freezer room is in a strong block), up to -18 below, the temperature difference between the inside and outside is large, so the temperature in the box drops every 1 is very difficult, and furthermore, the cold air loss through the box insulation layer and the door seal will also be accelerated, so that the start-up time is very long and the downtime is very short, which will cause the compressor to run for a long time at high temperature, which consumes power and is easy to damage the compressor.
-
Seven is the coldest of the most.
The temperature control knob of a mechanical refrigerator generally has 1 to 7 gears, and the higher the number, the lower the temperature in the freezer, the longer the compressor working time, and the greater the power consumption. The gear of the thermostat should be adjusted according to the seasonal temperature changes.
-
The refrigerator has these several gears, generally the higher the number, the colder, you can also try it, you can press one gear first, and then turn the gear higher.
-
7. The temperature control knob of the coldest refrigerator is marked with a number, which represents the control range of the temperature in the refrigerator, and the nominal number on the refrigerator temperature adjustment refers to the refrigeration intensity of the refrigerator, so the larger the number, the lower the temperature. The 0 gear is standby, the compressor does not work, and the 7th gear has the lowest temperature, there is a temperature sensor in the refrigerator room, the higher the outside temperature and the greater the temperature difference in the refrigerator, and the thermostat does not feel the temperature difference in winter, so the number needs to be increased, generally 6-7 gears.
How to adjust the refrigerator gear - how to adjust the refrigerator gear:
In summer, when the refrigerator stall is adjusted, its working time and power consumption are greatly affected by the ambient temperature during the use of the refrigerator. When the ambient temperature is high in summer, the temperature should be adjusted between 1 and 2 gears.
Most refrigerators today have the opposite temperature represented by the numbers in the refrigerator room thermostat. In other words, the lower the refrigerator gear, the larger the number.
Refrigerator gear optional button is basically gear, the larger the number, the lower the temperature of the refrigerator compartment, in general, in spring and autumn we only need to adjust the refrigerator temperature to 3 when, summer refrigerator temperature to 1 or 2 gear, so as to achieve better energy saving effect.
Be wary of the wrong refrigerator gear adjustment method, beware of causing damage to the compressor, maybe someone may have such a wrong adjustment method, the refrigerator temperature is adjusted very low in winter, and the refrigerator temperature is adjusted very high in summer. When our ambient temperature drops to a very low level, if the temperature of your refrigerator is still around 3 gears, the refrigerator compressor will stop working, but at this time your refrigerator temperature is actually not up to the normal refrigeration temperature.
In order to make the refrigerator gear reach the normal refrigerator temperature of 18 degrees, the refrigerator compressor will start frequently and shut down frequently, which not only can not save electricity, but will cause excessive consumption of electric energy, and at the same time cause more serious damage to the compressor.
-
There is no heating in my house in winter, and the refrigerator can only run until the 7th gear, and the other gears are not running.
-
Hello dear, the refrigerator temperature adjustment number 6 is the coldest. 1. For mechanically controlled refrigerators, the temperature adjustment gear is represented by numbers 1-6. 1 has the highest temperature and 6 has the lowest temperature, that is, the higher the number, the lower the temperature.
Staring at the gear control temperature at about 9 10, which is also the refrigerator is the highest temperature, usually in the summer when the indoor temperature exceeds 32 degrees need to be set this gear temperature at about 8, is also a commonly used gear in summer The temperature is 6 7, 4 gear temperature is about 5, these two gears are suitable for spring and autumn, the indoor temperature is set at 20 25 degrees when the gear control temperature is about 4, 6 gear is about 3, these two gears are usually set in winter, when the indoor temperature is lower than 15 degrees. In different seasons, the gear of the refrigerator is not the same, the ambient temperature of the refrigerator is high in summer, the heat dissipation of the refrigerator is slow, and the running time of the refrigerator will be relatively long, so the thermostat should be adjusted to the weak gear (2-3). In winter, the gear should be played to more than 4 gears, because the vertical opening is relatively low in the winter refrigeration environment.
The above is all my reply, I hope it can help you, I wish you a happy life
-
The refrigerator has a temperature regulator of 1 to 7, with 7 being the coldest. The temperature control knob of the refrigerator generally has five gears, or gears, the 0 gear in this is the shutdown gear is the forced cold gear, when the thermostat is adjusted to the forced cold gear, because the control temperature is low, the compressor will continue to work, and the refrigerator has almost been in a state of non-stop.
The larger the number of the thermostat, the lower the temperature of the freezer, generally adjust the five gears 2-3 gears, and the 7 gears control the freezing -18 degrees after the 3-4 gears and refrigerate 5 degrees without further adjustment.
-
The higher the number, the lower the temperature, so it is 7 the coldest, and the temperature difference between the refrigerator and the outside is quite large in summer, so it is recommended to adjust it to 2-3 gear.
-
In mechanically controlled refrigerators, the temperature adjustment level is indicated by the number 1-7. 1 of them has the highest temperature and 7 has the lowest temperature, that is, the higher the number, the lower the temperature.
Now it is a popular trend for refrigerators to be air-cooled.
1. The refrigeration speed of air-cooled refrigerators is faster.
2. The biggest advantage of air-cooled refrigerator is frost-free refrigerator, which does not produce frost, but allows the frost to basically condense on the top of the evaporator and will not condense on the inner wall of the refrigerator.
3. The food preservation temperature is uniform, the humidity is small, the food is relatively dry, and the smell is relatively fresh.
-
Variable 7 is the coldest, and the temperature control of the refrigerator is reversed, with the highest temperature being the lowest.
-
The user should adjust the size of the gear according to the ambient temperature of the season, adjust it to a small size in summer, increase it in winter, and adjust it in the middle of a gear in spring and autumn, so as to ensure that the temperature and dust in the refrigerator are kept within the normal range of the calendar, that is, the freezer is about minus 18 degrees, and the refrigerator is between 4-8 degrees. This is not only conducive to the freezing and preservation of food, but also saves electricity.
-
Which is the coldest fridge number 1 7 tune?
Refrigerator numbers 1-7 regulation usually refers to the temperature control of the refrigerator, where the number 1 indicates the minimum temperature and the number 7 indicates the maximum temperature. Therefore, the number 7 corresponds to the warmest temperature, and the number 1 corresponds to the coldest temperature. Generally speaking, the temperature inside the refrigerator should be controlled between 0-5 degrees, which can ensure the freshness and quality of the food.
If you want to adjust the temperature of the refrigerator, please choose the temperature between the numbers 1-5 according to the actual needs to ensure that the temperature inside the refrigerator is within the appropriate range. If you are not sure which digital and modular round characters you should choose, it is recommended to check the instruction manual of Bingdan Jinhua box or consult after-sales service.
The digital meter can be slowed down by shorting the two live wires with copper wires, and it should be noted that it is illegal to steal electricity, as follows: >>>More
Haier refrigerator of artificial intelligence generally defaults to intelligent temperature adjustment,You don't need to set it yourself,If the artificial intelligence is not turned on,In a non-locked state,You can press the artificial intelligence key on the refrigerator panel,The icon e,The refrigerator enters the artificial intelligence state,Press the smart key again,The icon e disappears,The intelligent adjustment state exits。 >>>More
There should be a knob on the outside of the freezer to adjust the temperature with a number on it, the higher the number, the lower the temperature. In summer, the adjustment is to allow the freezer to reach the temperature quickly and shut down, and then the freezer can be turned on quickly after the temperature is warmed up, and the temperature of the freezer is always balanced. If the gear is set very high, it seems that the temperature is very low, but the running time of the freezer is longer, and the temperature is also long when the temperature is returned to the machine, and the temperature difference will be very large. >>>More
1. If you choose a smart refrigerator, there is a smart button on it, we need to press it once, and it can display the temperature of the current refrigerator. The refrigerator temperature standard can be adjusted with this button, which is lowered by 1 with each press of the temperature. >>>More
I'm in Haier maintenance,I know a lot about Hisense,But there may not be so many gears,Haier's is generally 7 gears。 >>>More