Will the refrigerator be broken if it is carried upside down, and can the refrigerator be carried ba

There will be no consequences if the refrigerator is put down, and it will not break if it is put down. However, after picking up the refrigerator, it will take half an hour before the power can be turned on. After the refrigerator is put down, the lubricating oil in the refrigerator compressor will enter the pipeline, if it is powered on immediately after lifting, the compressor will work so that the lubricating oil enters the capillary from the high-pressure pipe, which will lead to the blockage of the pipeline, referred to as oil blockage.

And the refrigerant inside will not circulate in the pipes, and the refrigerator will not be refrigerated.

9 Steps to Clean Your Refrigerator:

It is best to clean the refrigerator case every day, and wipe the refrigerator case and handle every day with a slightly damp and soft cloth.

Turn off the power and remove the food from the refrigerator before cleaning the liner.

Dip a soft cloth in water or utensils dish soap, scrub gently, and then wipe off the dish soap with water.

Remove the accessories in the box and wash with water or dish soap.

Clean the refrigerator"switch"、"Lights"with"Thermostat"When waiting for the facility, please wring out a rag or sponge.

After cleaning the inner wall, you can use a soft cloth dipped in glycerin (medical corkscrew) to wipe the inner wall of the refrigerator, and it will be easier to wipe it next time.

Clean and wipe the seal with an alcohol-soaked cloth. If you don't have alcohol on hand, wipe the sealing strip with 1:1 vinegar water, the disinfection effect is good.

Clean the ventilation grille on the back of the refrigerator with a vacuum cleaner or a soft-bristled brush, not with a damp cloth to avoid rust.

Once cleaned, plug in and check that the temperature controller is set in the correct position.

1. If the refrigerator belongs to a rotary compressor, it can be carried upside down and will not break. 2. If the refrigerator is a piston compressor, the compressor will be damaged if it is placed and handled. 3. If the refrigerator refrigerant is freon, handling it backwards will also cause freon leakage.

There are many reasons: 1. The refrigerator compressor belongs to the rotary type, and it will not cause damage to the compressor if it is handled upside down, as long as it is transported and left to stand for 2-3 hours, and then energized, so as to avoid the oil on the compressor from entering the pipeline, resulting in cold insulation on the wall of the refrigerator and affecting the refrigeration effect. 2. If the refrigerator is a piston compressor, handling it upside down will cause damage to the compressor, resulting in the overall damage of the refrigerator.

During the transportation of the refrigerator, do not grasp the door handle or countertop, condenser, etc., and do not drag it on the ground, which will cause damage to the compressor, and even cause the refrigeration oil to flow into the refrigeration pipeline, thereby affecting the refrigeration. At the same time, carrying the refrigerator upside down will also cause the compressor to uncoil. 3. Freon is a refrigerant in the refrigerator, which generally needs to be left for 2-6 hours after handling, and then it is not a big problem to use it with electricity.

Refrigerators that are commonly transported on trucks are usually not refrigerators with freon as a refrigerant, so handling them horizontally or vertically will not have a great impact on quality.

The refrigerator cannot be transported down.

Explain in detail. Because the compressor in the refrigerator is a piston type, the piston refrigerator cannot be placed upside down, if the refrigerator is placed upside down, the compressor in the refrigerator will be damaged, which will also cause the refrigerator to be damaged.

It should be noted that the inclination during the handling of the refrigerator should not be greater than 45 degrees, because of the refrigerator compressor.

In order to reduce noise and cushioning, the entire motor is spring-loaded on the casing, and if it is tilted too much, the snap-loaded hook will fall off.

Precautions for refrigerator transportation.

The internal structure of the refrigerator is relatively complex, so in the process of handling, it is necessary to pay attention to avoid violent shaking, let alone bumps, otherwise the internal welded part will be damaged, which will cause the failure of the refrigeration system and may even leave potential safety hazards.

Before handling, you need to unplug the refrigerator. After transporting to the designated place, be careful not to turn on the power immediately to avoid damage to the compressor.

The refrigerator can be transported backwards, but it is generally not recommended to put it down. The inclination of the refrigerator during handling shall not be greater than 45 degrees, because the refrigerator compressor is suspended on the casing through the spring in order to reduce noise and buffer, and if the inclination is excessive, the spring hook will fall off, which will easily lead to damage to the compressor.

1. No, you cannot. 2. The inclination of the refrigerator during handling shall not be greater than 45 degrees, because the refrigerator compressor is suspended on the casing by the spring in order to reduce noise and buffer, if the inclination is excessive, the spring hook will fall off, resulting in damage to the compressor, so it is recommended not to put it upside down. In the case of a rotary compressor, it can be reclined at will.

3. After the refrigerator is transported, it needs to be put in the right position for at least 2 to 3 hours before it can be powered on, so as to avoid the compressor oil entering the pipeline, which will be insulated on the wall of the refrigerator, resulting in a decrease in the refrigeration effect.

Hello! The refrigerator cannot be transported backwards. On the bottom inside the back wall of the refrigerator, there is a compressor, and there is some lubricating oil at the bottom of the compressor as well as inside the housing of the electric motor.

If the refrigerator is lifted upside down or tilted excessively when moving, the lubricating oil will flow into the refrigeration system above the compressor and motor, which will hinder the circulation of Freon in the refrigeration system, affect the normal operation of the refrigeration system, and damage the service life of the refrigerator.

Can the refrigerator be put down and transported 1. The refrigerator cannot be put down for transportation. 2. The refrigerator is a kind of refrigeration equipment that maintains a constant low temperature, and it is also a civilian product that keeps food or other items in a constant low temperature and cold state. Inside the box there is a compressor, a cabinet or box for ice making for icing, and a storage box with a refrigeration unit.

3. When transporting, the maximum inclination angle of the box can not exceed 45 degrees, and it cannot be inverted or horizontally, because there is refrigeration oil in the compressor, and if the oil is reversed, it will enter the refrigeration pipe, which will cause blockage to the pipeline and reduce the refrigeration effect too much.

Because on the bottom inside the back wall of the refrigerator, there is a compressor, and there is some lubricating oil at the bottom of the compressor and in the housing of the motor. If the refrigerator is lifted upside down or tilted excessively when moving, the lubricating oil will flow into the refrigeration system above the compressor and motor, which will hinder the circulation of Freon in the refrigeration system and affect the normal operation of the refrigeration system. Therefore, when moving, you can't ask for fast, you should pay attention to the tips when you move it three times and two times, and you can't put the refrigerator upside down, which will damage the service life of the refrigerator.

The refrigerator cannot be left lying down. The refrigerant in the refrigerator is fluorine. If you leave it lying down, it is easy to cause fluoride leakage.

After the fluoride leaks, your refrigerator will not refrigerate. 45 degrees Celsius is also prone to fluorine leakage. If you put the fluoride away before moving, you can lie down and go, but you will have to re-fluoride when you get to your destination.

It is easy to ruin the appearance of the refrigerator when lying down. The condenser tube that is easy to damage it when lying down during transportation. The refrigerator compressor is fixed by three springs, which has high requirements for the placement of the refrigerator, and must not be tilted or placed down, otherwise it will cause damage to the compressor or leakage of refrigerant.

The refrigerator can not be put down and transported, to prevent the lubricating oil of the compressor from flowing into the heat exchanger, if it is a freon refrigerator, to prevent the freon from flowing out, the slope of moving the refrigerator can not exceed 45 degrees, after the refrigerator is moved to the house, it can only be started after a few hours, or it will not have an uncertain impact on the compressor.

There is a compressor on the back of the refrigerator, and there is some lubricating oil at the bottom of the compressor as well as inside the housing of the electric motor.

If the refrigerator is placed upside down, the lubricating oil will flow backwards into the refrigeration system above the compressor and electric motor.

In this way, the circulation of Freon in the refrigeration system of the refrigerator is hindered, which affects the normal operation of the refrigeration system.

Things to pay attention to when handling the refrigerator:

It cannot be inverted or horizontally during handling, which will cause the refrigeration oil in the compressor to flow into the refrigeration line.

During the transportation of the refrigerator, beware of bumps and strong vibrations, and beware of rain and water immersion.

The refrigerator should be kept away from the heat source, the higher the outside temperature, the slower the heat dissipation, and the poor cooling efficiency.

The refrigerator should be stored in a place with low humidity, if the air humidity is too heavy, it will affect the function of electrical appliances.

There is a compressor at the bottom of the back wall of the refrigerator, so there is some lube at the bottom of the compressor and motor housing. If the refrigerator is reversed or tilted excessively during operation, the lubricating oil will flow into the refrigeration system above the compressor and motor, hindering the circulation of freon in the refrigeration system and affecting the normal operation of the refrigeration system.

Hello, first of all, when handling the refrigerator, you should pay attention to the tilt of the fuselage can not exceed 45 °, to keep the vertical state of the box, do not invert and horizontally.

If the inclination angle is greater than 45°, the spring in the compressor will be deformed due to uneven force, or even cause decoupling, so the refrigerator cannot be put down for handling. Thank you!

Because one is that the compressor has a refrigeration system. The second is that the main engine in the compressor is placed on a three-point bracket, and once it is put down, it is likely that the compressor will be damaged.

Refrigerant, freon put easy to disperse. Therefore, after moving, it can be used only when it is still for a while.

The refrigerator will break down when it is transported upside down. If it is put down for transportation, it can cause a loss and become a refrigerator compressor failure; In order to reduce noise and buffering, the whole motor of the refrigerator compressor is hung on the casing by spring, if the tilt is excessive, the spring hook will fall off, so that the compressor will be damaged. Here's a closer look:

1. The refrigerator cannot be put down for transportation, and it is stated in the manual, if it is put down for transportation, it will cause the refrigerator compressor to hit the cylinder, and the refrigerator will not be able to be used normally; 2. It should be noted that the inclination of the refrigerator during handling shall not be greater than 45 degrees, because in order to reduce noise and buffer, the entire motor of the refrigerator compressor is hung on the casing through the spring, if the tilt is excessive, the spring hook will fall off, resulting in damage to the compressor, so it is recommended not to put it upside down. 3. However, if it is a rotary compressor, it can be put down at will. The refrigerator needs to be put on for at least 2 to 3 hours before it can be powered on to avoid the compressor oil from entering the pipeline, which will be insulated by the wall of the refrigerator pipe, resulting in a decrease in the refrigeration effect.

Yes. The refrigerator is a fully enclosed compressor, and the motor system of the entire refrigerator is centrifugal, that is to say, three evenly distributed springs are used to fix and support it.

The refrigeration oil inside the compressor and its bump with the buta refrigerant, if the refrigerator is handled horizontally, it is easy to cause the oil to flow out of the system pipeline, resulting in the blockage of the system pipeline and can not be refrigerated normally.

Precautions for refrigerator handling.

When handling, the feet should be lifted, and the door handle should not be grasped or the force should be applied on the countertop and condenser, let alone dragged on the ground.

The maximum inclination angle of the box can not exceed 45 degrees, and it can not be inverted or horizontally, otherwise it will damage the compressor or make the refrigeration oil in the compressor flow into the refrigeration pipeline, affect the refrigeration, and easily cause the compressor to despring.

It should be placed in a well-ventilated place, if the refrigerator and freezer are piled up with debris, or if they are too close to the wall, it is not conducive to heat dissipation and will affect the cooling effect. There should be at least 30cm of space on the top surface of the refrigerator, and at least 10cm on the back and sides of the refrigerator to facilitate heat dissipation.

The above content refers to People's Daily Online - 5 things to pay attention to when handling refrigerators.