Is the Huatai Santa Fe 1 8t engine repaired well

Updated on Car 2024-08-12
13 answers
  1. Anonymous users2024-02-16

    Hello, if the car is caused by high temperatures, this is not easy to repair. In the past, when we repaired this car, as long as it encountered high temperatures, we would replace the engine assembly, not to mention the cylinder head screws, which were long and thin. In addition, if the cylinder liner is not sharpened well, the engine temperature will be too high after the engine is repaired.

    Break a leg. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  2. Anonymous users2024-02-15

    For engine repair of this car, try to go to 4s. This engine has broken many people's [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  3. Anonymous users2024-02-14

    Do know the task:, thank you!!

    No matter what kind of oil, as long as the anti-wear property is good;

    After many cars that burn engine oil use super eutectic lubricating oil, they are pleasantly surprised to find that they no longer burn engine oil, because it is nano anti-wear repair engine oil; Directly approved by the manufacturer;

    The wear resistance of the engine oil is not good, and it can be improved a lot by using the super eutectic lubricating oil with good wear resistance;

    The general fuel additive is a bottle of 50 ml with 60 liters of gasoline, first fill up the fuel, and then pour it in;

    However, I recommend you to use Chaomei brand fuel additives for Sinopec OEM;

    The real way is to buy an engine internal cleaning agent produced by Chaomei, pour it into the oil cylinder, idle for ten minutes, and then replace it...

    You use poor engine oil, which is not resistant to wear and tear, and soon burns the engine oil, tens of thousands of kilometers; With engine oil with good wear resistance, it is basically difficult to wear, and it will not burn engine oil for life;

    Do you still believe in the original? The original one is the most basic qualified; Definitely not the best;

    These oils are average, and no one is better than the other; You need to use a good anti-wear oil to protect the car;

    Burning engine oil means that the engine oil is not anti-wear, and the wear particles are too large, resulting in poor sealing before burning engine oil;

    Use super eutectic lubricating oil with good anti-wear performance to repair the slight burning of engine oil; And it's not expensive;

    It is not normal to burn engine oil, either there is a problem with the assembly, or the engine oil is not wear-resistant;

    The engine oil used is not good and does not play a role in anti-wear; Wear and carbon deposits are generated, resulting in louder noise;

    Remove carbon deposits, enhance power, eliminate exhaust gases, save fuel and reduce fuel consumption.

    Use super eutectic lubricating oil, close to zero wear, no oil burning;

  4. Anonymous users2024-02-13

    The 18K4G engine is produced independently by SAIC, and the engine design is derived from the engine of Luofu, and the existing Roewe 750S, D and other models are using this engine, which is four-cylinder turbocharged.

    This engine is relatively powerful, and it is very sluggish at low speeds, with a speed of more than 40km h, and this engine will burst out with real strength, which can basically be PK with the current Magotan. At high speed, the power is also continuously supplied, it can be said that this domestic engine is still very good, but the turbine technology of this engine is not particularly mature, and the engine chain may be a little noisy, basically there is no small problem.

    It's up to you how you decide.,The previous one told you the parameters.,I'll tell you the usage.。。。

  5. Anonymous users2024-02-12

    What is the mark when the crankshaft of the Huatai Santa Fe T gasoline engine is aligned? Is there a **??

  6. Anonymous users2024-02-11

    Engine model.

    18K4G engine parameters are as follows, displacement (ml).

    Air intake form. Turbocharged.

    Cylinder arrangement.

    l Number of cylinders (pcs).

    4. Number of valves per cylinder (pcs).

    4 compression ratio. Valve mechanism.

    DOHC maximum horsepower (ps).

    160 maximum power (kw).

    118 maximum power speed (rpm).

    Maximum torque (n·m).

    215 maximum torque speed (rpm).

    Fuel form. Gasoline fuel number.

    No. 93 (No. 92 Jing).

    Fuel supply method. Multi-point EFI.

    Cylinder head material. Aluminum block material.

    Aluminum environmental protection standard China IV

  7. Anonymous users2024-02-10

    How many kilometers have you traveled? It is possible that the spark plug and cylinder line are not ignited, and the throttle has not been cleaned during maintenance, and the throttle is too dirty will also lead to unstable idling [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  8. Anonymous users2024-02-09

    Check that your throttle valve volume is too much carbon, need to clean the throttle valve body, check whether there is any air leakage in the vacuum pipe of your whole car? Or the check valve is damaged and causes air leakage, causing the engine to idle unstable, check that there is a problem with your oil pump pressure, if the oil pump pressure is too low, it will also cause the engine to idle unstable. Check that your spark plug gap is too large, the ignition energy caused by the aging of the ignition coil for a long time is too weak, and check that your fuel injector atomization is not good, which will cause the engine to work poorly and cause the engine to shake, check that your intake pressure sensor signal is incorrect, and the engine can not detect the air intake of the whole vehicle, which will also cause the engine to shake.

    [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  9. Anonymous users2024-02-08

    Hello, I have seen your question and am sorting out the answer, please wait a while

  10. Anonymous users2024-02-07

    Disassemble the engine, remove the cylinder head, mill the contact surface of the body, and see if the ten cylinder head screws can be compressed, if you can't change the oil rail and cylinder head screws.

  11. Anonymous users2024-02-06

    Hello, please consult your local dealer.

  12. Anonymous users2024-02-05

    Hello, this about the vehicle failure, and how to repair the failure of specific parts, as well as the specific maintenance costs, please consult the professional technicians of the after-sales department of 4S, they can give more professional advice and **, if you think it is appropriate, please adopt my answer.

  13. Anonymous users2024-02-04

    Many people are planning to buy a car. It can help us with a lot of convenience. The engine is the most important part of the car, which determines the quality of the whole vehicle. Therefore, we have to look at how to buy a Huatai Santa Fe engine before we buy it.

    First, what kind of engine is used.

    Huatai Santa Fe engine, 18K4G engine, independently produced by SAIC, engine design from Rover's engine, the existing Roewe 750S, D and other models are using this engine, with four-cylinder turbocharging. At high speeds, it can provide continuous power supply. It can be said that this domestic engine is still very good.

    Second, how about the engine.

    The Huatai Santa Fe engine adopts aviation-grade all-aluminum alloy parts, which improves strength and lightens weight. The DOHC double overhead camshaft has 4 valves per cylinder, a maximum power of 118kW at 5500 rpm, and a peak torque of 215Nm that can output from 2100 rpm to 4000 rpm, which is completely superior to the traditional engine in terms of technology.

    Third, how is the engine performance.

    The Santa Feiyue engine adopts the revolutionary Honeywell ultra-high pressure-tech electronic turbocharging technology, and Yinxunsun solves the turbo hysteresis problem of traditional turbocharged engines, achieving the same dynamic response sensitivity as ordinary naturally aspirated engines, greatly increasing power and torque without increasing engine displacement, and effectively reducing fuel consumption rate and pollutant emissions while improving thermal efficiency and assistance. It can be said that the Huatai Santa Fe engine has reached the world's first-edge chain flow level in terms of power, fuel consumption and environmental protection.

    To sum up, we have seen a general introduction to the Huatai Santa Fe engine from the Wenchang manuscript, what kind of engine is used in this car, what kind of engine is this engine, and the performance of the engine is also very good, reaching the world-class level.

    Millions of car purchase subsidies.

Related questions
14 answers2024-08-12

The reason for the burning of engine oil is that the oil quality is not good or the viscosity grade does not meet the requirements. In addition, too low or too high oil viscosity can lead to poor engine lubrication, increased wear on piston rings and cylinder walls, and reduced sealing performance, resulting in oil burning. 1. The fitting gap between the piston ring and the cylinder wall is too large, the piston ring is improperly installed or the sealing is poor, and the oil scraping effect of the oil ring is weakened, so that the oil enters the combustion chamber. >>>More

17 answers2024-08-12

First, the ignition timing does not have a great impact on the car, the combustion of gasoline in the engine must be ignited by the spark plug jumping out of the spark, to make the engine start smoothly, and burn well, the spark of the spark plug must be strong enough, but more importantly, the time when the spark jumps out must be appropriate and correct, too early and too late will affect the horsepower of the engine, the time when the spark jumps out of the spark plug is the so-called ignition timing. It is generally expressed in terms of the angle of how many crankshaft turns before the piston goes to the top dead center, such as 10° before the top dead center, rather than in time. >>>More

6 answers2024-08-12

It's impossible, it's only been a long time since the product was officially sold. This depends on the long-term market reaction, and it will take at least half a year before such a statement can be made. But I think with his performance and ** will definitely not be cold, who doesn't want to buy high-quality and inexpensive products? >>>More

19 answers2024-08-12

Hello, the Beetle is of good quality, the engine reliability, stability is good, and the power performance is good.

7 answers2024-08-12

Petrol or diesel engine for EFI?