Can you still use moldy cups after washing them?

First: mainly look at what material the cup is. If it's steel, ceramic, wash it, bask in the sun, disinfect it, and you'll be fine.

Second: If it is plastic, it is not worth a few dollars, wash it, as long as it is not used to drink water, you can also use it.

Third: If it is purple sand, it is recommended that you can't use it, you can only watch it. Because the purple sand has fine pores, the contents are not easy to wash out, and even if it is soaked in water, it takes a long time to soak it clean. In this case, it is better to use it as an ornamental tool.

As long as it is completely clean, it is recommended to use baking soda or white vinegar to wash, but it is best to sterilize it at high temperature before use, so that it is more safe to use.

The cup is moldy, it can be used after washing, but we must distinguish what cup is made of, like most of the cups we use in our daily life, they can be used, such as thermos cups, glass stainless steel cups, porcelain cups Even if the cups are moldy, we use hot water to disinfect or use dish soap to wash the inside and outside of the cup and then wash it, and you can continue to use it after the detoxification, and you can no longer use it after some cups are moldy, such as disposable paper cups, including disposable plastic cups.

Of course, the moldy cup can be used after washing, and the moldy mold will not cause any harm to the body, but this is not 100%, it is recommended to disinfect it, or boil it with boiling water to be more secure.

If the moldy cup is made of glass, it depends on what material the cup is, if it is a glass or ceramic, wash it and soak it in salt water for an hour, it will basically be sterilized and can continue to be used, if it is a plastic cup, it will be thrown away directly and it cannot be used after washing.

Answer: The moldy cup is really cleaned, boiled and sterilized, and it can still be used. Don't be a little wasteful.

It's not enough to just wash it, you have to boil it in hot water, so that it can be thoroughly disinfected.

Washing a moldy cup may not have destroyed all the bacteria inside. It is recommended to put it in a pot and boil it, preferably for about ten minutes. That's it, the average cup won't burst when it's boiled.

It is all fired at a high temperature and should be 100 degrees without affecting the cup.

Glass ceramics can be boiled in boiling water for sterilization, and then used no problem.

Personally, I think it can be used if the glass is cleaned.

It can be used, but it needs to be cleaned up.

Moldy cups can still be used after washing. Mold only grows on the surface of food residue and does not enter the inside of the cup, and the quality of the cup itself is not affected. After mold enters the cup, it will accumulate on the surface of the cup, as long as the cup is cleaned thoroughly, the mold can be washed off, and the cup can continue to be used.

It is possible to use the cup if it is moldy.

In the case of moldy cups, the mold only grows on the surface of the food residue and does not enter the inside of the cup, and the quality of the cup itself is not affected by it. Therefore, for moldy cups, as long as they are thoroughly cleaned, they can still be used and do not need to worry too much.

If you are worried about the impact on your health, you can also sterilize the cup. It is recommended that it is best to clean the cup in time and dry it in a cool, ventilated and dry place indoors to avoid the growth of mold and adverse effects on human health.

The cup needs to be cleaned thoroughly after mold, and there are several ways to clean the cup:

1. Use dish soap.

A class of professional detergents. Wipe the mold stain on the inside of the cup once, then pour in dish soap, pour boiling water, and rinse with water after an hour. Using dish soap can quickly wash away mildew from the cup.

2. Baking soda.

It is an alkaline substance, and the cleaning force is relatively large, which can clean off the mold on the cup. Put the cup in a container first, add boiling water, then put in a spoonful of baking soda, shake or stir, soak for half an hour, rinse after soaking.

3. Salt can kill viruses and bacteria, it is best to clean mold with salt, the way to clean the cup with salt is to pour some salt in the cup, then fill it with boiling water, shake it evenly, leave it for two hours, and finally wash the thermos cup with water several times, add boiling water for a while and then pour it off, open the lid and dry it in a ventilated place for a few days.

If the cleaned cup smells, you can squeeze some lemon juice into the cup.

Or add some tea leaves and use hot water to brew a few more times to get rid of odors. You can also use toothpaste to brush the cup, which can remove scale and odor.

The cup is moldy, washed and can still be used. Therefore, for moldy cups, as long as they are thoroughly cleaned, they can still be used. You don't need to worry too much if you are worried about the impact on your health.

Then the cup can also be sterilized and sterilized. To clean the moldy cup, you can use table salt, clean the cup with detergent, pour the diluted salt water into it, shake it evenly, let it stand for two hours, pour boiling water and simmer for a while after cleaning.

Temperature conditions for moldMold can grow in a temperature range of 0 to 40, while 22 to 35 is considered the optimal temperature for mold growth. The optimal temperature for different types of molds is different, and the most suitable temperature for most molds to reproduce is 25 to 30, below 0 or above 30, and cannot produce poison or weaken virulence. Such as Aspergillus flavus.

The minimum breeding temperature range is 6 to 8, the maximum breeding temperature is 44 to 46, and the optimal growth temperature is about 37.

The cup can still be used if it is moldy, but it needs to be cleaned thoroughly, and tools are required to clean the moldy cup: an appropriate amount of water and half a cup of rice. Divided into 5 steps, the following is the detailed operation of cleaning moldy cups:

Steps.

Pour in the rice. Pour an appropriate amount of rice into the moldy cup.

Add water. Add a pinch of water. Screw on the cap.

Shake. Hold the cup and shake it constantly.

Rinse repeatedly. Rinse repeatedly with clean water.

Finish. Finish.

Normally, moldy cups can still be drunk as long as they are cleaned.

If the cup is moldy, it is an indication that the cup has been contaminated with microorganisms, and if the cup is cleaned, the cup can still be used at this time. It is recommended to clean the moldy cup with water first, remove the metabolites of the microorganisms attached to the surface of the cup, and then scald the cup several times with hot water to effectively kill the microorganisms in the cup, and finally use water to clean the cup.

Precautions for the purchase of water cups

1. Water cups need to be purchased according to different needs, there are many types of water cups: glass cups, ceramic cups, stainless steel cups, thermos cups, etc., all have different advantages and disadvantages, there are some inferior cups that will produce chemicals when heated, and some are not easy to clean, so the selection of cups should first meet the health and then meet the appearance.

2. In addition to the safety of the cup itself, we should also choose a ceramic cup according to our own drinking habits, if you like to drink tea, you can choose a ceramic cup, if you choose a universal and practical one, you can choose a glass cup, if you pursue the appearance of fashion and generosity, and the functionality is helpful to life or has a gift needs, you can choose a smart cup or the like.

The above content refers to Encyclopedia-Cup.

Dear, hello, Latan Chain is happy to serve you, the answer is as follows. If the ceramic cup is moldy, you can also use the cleaning method of the ceramic cup moldy: 1. Use a fine cloth or sponge dipped in a small amount of toothpaste, scrub gently, and it can be washed quickly, and it will not damage the porcelain surface.

2. After soaking in vinegar, mildew can be easily removed. 3. Prepare hot water, take a potato and chop it and put it in the cup, pour the prepared heat into the cup and soak it for 10 minutes, and then you can easily wash off the mildew on the cup. In general, after the ceramic cup is moldy, as long as it is cleaned and disinfected, it can continue to be used, of course, if the mold is very serious, it should be thrown away.

The main components of ceramic cups are kaolin, clay, porcelain stone, china clay, colorants, blue and white materials, lime glaze, lime alkali glaze, etc. Jingdezhen ceramic cups are mainly made of kaolin ceramics, which is a kind of clay mainly composed of kaolinite. It was named after Gaoling Village, which was first discovered in the northeast of Jingdezhen, Jiangxi Province.

Its chemical experiment formula is: al203·2si02·2h20, and the percentage of weight is in order96%。

Pure kaolin is dense or loose in the form of blocks, white and light gray in appearance. When polluted by other impurities, it can be black-brown, pink, beige, etc., with a slippery feeling, easy to knead into powder by hand, the color is white after calcination, and the refractory degree is high, which is an excellent raw material for porcelain.