When fishing, what points do you need to pay attention to if you want to fundamentally solve the pro

Be sure to think about your throwing position, don't shake it, and pay attention to the connection between the line and the hook. Consider the malleability of the strands.

If you want to avoid the probability of the strand entanglement, you must fundamentally control your own casting technique and starting force. When the plumb sinker and bait ball fall into the water, the bait should be thrown out and the rod should have a downward reverberation action. The bait is in front and the fall is in the back. This avoids sinking of the plumb sinker and tangling of the strands.

Be sure to pay attention to the technique of throwing the rod, and make the main line appear in a straight state, pay attention to the appropriate reel, and do not make the fishing line too long.

The main line is tied to the figure-8 ring, and the sub-line is tied to the other end of the figure-8 ring. There are 8-ring fishing tackle shops that sell them.

The binding method of connecting the main line of the sub-line is not easy to cut the line when fishing big fish, which is very simple and practical!

There are detailed ** and tutorials available online.

Method: 1. There is a small tail at the junction of the figure 8 ring, this small tail is a small ring, and the upper hook is passed through this small ring (the lower hook can also be used).

The advantages of this are: no need to add additional financial and material resources, will not increase the underwater target, do not change the weight of the fishing rig, operate flexibly and conveniently, and do not lose the strength of the original connection.

2. You can also push a small space bean on the truncated strand before tying the hook, and then tie the hook, and then tie the hook to the figure 8 ring according to the normal method and push the small space bean to the root of the long line, so that there is a small space bean between the long line and the short line, and it will not be entangled.

Twin line winding is a common problem in Taiwan fishing for several reasons:

1. The rod is too hard or the rod is too heavy. In the case of not hitting the fish, the hook bounces upwards with the help of the inertia of the lifting rod, which can easily cause the strand to become entangled and knotted.

Second, the selection of sub-lines is improper. Some fishing lines are easy to generate static electricity, and after tying the double hooks, they will naturally be wound together due to static electricity, and the thinner the line, the easier it is to bend, so the line should be suitable for the size of the fish. Another important reason is that the strands used themselves are less resistant to bending.

Third, the unevenness of the lead roll. When rolling the lead skin, the tightness is different, especially the small lead skin added by fine-tuning is too large, resulting in a bulge on one side, and the rapid rotation of the lead skin seat when lifting the rod causes the strand to be wound.

Fourth, the problem of defishing. When using the decoupling device to scrape the fish, the action drags, and the sub-line is also scraped on the decoupling device to press the line and turn the hook, damaging the sub-line and causing entanglement.

Fifth, the problem of bait pulling techniques. In the case of thinner strands, the bait group is deeper and the bait pulling force is too large, which will also cause damage to the strands and cause the strands to be entangled.

First of all, from the point of view of the fishing rod, it is really important to have a fishing rod in hand, only in this way can you grasp your own actions in the process of walking and controlling the fish, of course, controlling the action of the rod is also the basic skill that anglers must have. When there is action in the float, the excessive strength of the fishing novice is the biggest reason for the unhooking and running fish. Therefore, when you find that there is a big action in the float, you must grasp the arm strength, put the elbow on your knee, and use the knee as a support point, so as to control the strength of the rod and walk it is better, otherwise the fish will easily break the line and break the mouth of the small fish, resulting in unhooking and running fish, and the fishing line will return to the direction of the fish.

In competitive fishing, regardless of whether you hit the fish or not, the strength of the rod should not be too heavy, moderate spring, and then the line set will be entangled together, and then the problem can be solved.

Use a stiffer strand. I used a black, 10 yuan 100-meter nylon line to catch up to now, and there are countless fish. There is no main line at all.

It's not okay, buy the branch line space beans.

Change the line or change the length of the strand.

It's very simple: Hold two space beans when tying the hook.

When using, pull the space beans to both ends, and then pull the two space beans to the figure 8 ring after connecting the main line.

Two benefits:1 Greatly reduces the winding of strands.

2 Keep the two hooks at a distance underwater.

There is no better technology than the sales forum, go and see it, it is definitely a great value Some people hate it.

The strand you are asking specifically refers to the freshwater strand.

The so-called strand length is the length of your strand from the figure eight ring or quick pin to the fishhook.

The length of 15 or 20 cm usually refers to the length of a single hook to the figure-eight ring.

Because you are using the table fishing method, there are 2 hooks, and the length is inconsistent after tying, but when you tie the hook, it is a line, so you have a sub-line ruler to measure the length.

During the competition, the rule of the strand is usually not longer than 20 cm, and the total length of the two hooks will be 40 cm if they are not folded.

It is based on the length of the bottom hook, and the distance between the upper and lower hooks is set by yourself, usually 3-5 cm apart.

The length mentioned is the length after binding, so when you use a wire ruler to measure, there is still a little surplus line out, and the surplus line is used to make up for the material you tie the thread and the excess thread that needs to be cut.

Different brands and materials have different characteristics and performances. When using the strand, it is necessary to gently feel the material of the line and the thickness of the line, the diameter of the line is required to be symmetrical, the line body is required to be soft, and the line table is required to be smooth and there is no concave and convex feeling. The tensile value of the strand is basically reached, the memory of the line is low, and there is a certain repulsion between the two strands.

Such a good line is automatically divided after draining (the surface layer needs to be protected or electrostatically treated). It is not easy to get entangled when it is opened and lifted. We are also able to use carbon lines when fishing for raw fish.

This kind of strand material is hard, and it is not easy to get entangled and knotted. Overall, I'm in favor of buying a better strand, although it's more expensive, but it's worth it. Less broken threads, less entanglements, less line changes, less fishing, everything is earned.

There are about two more common ways to hang the thread, each of which has its own advantages. Some anglers feel that method B is stronger than method A, but method A will be smoother in and out of the water because there is no thread, and there will be no rapid lifting of the rod to cause the line set to rotate rapidly, which can effectively reduce the knotting or entanglement of the subline.

If you catch a big fish, method B is good, but you use a thick line to catch a big fish, and the frequency of lifting the rod is also low, so it is not easy to have knots or entanglements in the strands. According to personal experience, the longest occurrence of knotting is in crucian carp fishing, and when using the following strands, fishing can be completely hung according to the A method. Operation method B should pay attention to the fact that the end of the thread should not be left too large.

Strictly speaking, as long as the knot can be fixed on the ring, it will not loosen or loosen, which is enough to meet their normal requirements.

However, the smaller the knot, the faster the force is transmitted to the figure-eight ring when the knot is turned and wound, the smaller the loss, in other words, the knot cannot hinder the coiling of the strand. However, we can tie the knot thicker, that is, two more turns, the knotted fishing line is squeezed with a figure-eight ring, and the strength of the line will have a buffer on the knot, although it will still be rolled, but it can effectively reduce the winding.

Choosing a high-quality line is the basis of anti-winding, in the past article we have taught you how to buy fishing line, mentioned that a good fishing line has one of the biggest characteristics, that is, strong resilience, not easy to distort. In this way, after throwing, the probability of knot entanglement is very low. In addition, some relatively high-end existing hangers also have the advantages of "anti-winding", which can be used as a reference.

In the process of fishing, be sure to cast the net in place at one time, so as to effectively avoid the entanglement of the strand line. And you should choose a subline with the right specifications.

Try Wang Zuoqiang, the line is soft and anti-entanglement, and I recommend that many fishing friends around me are using it, and they are the kind that I can't put down I don't understand myself.

When fishing, it is necessary to loosen the line appropriately, which can improve the flexibility of fishing.

When tying the hook, you need to pay attention to choosing the right way, so that it can be effectively avoided.

Proper casting posture: Hold the bait or line in your left hand and lift the line with your right hand while loosening the bait (line) so that the bait will swing out naturally. Remember to prevent the rod tip from bending, causing a certain elasticity and "bouncing" the hook bait.

If you use rubbing bait for fishing, after rubbing 2 hook bait, be sure to take the 2 hook bait in the palm of your hand, and throw the rod naturally, in the case of shaking, the bait is in front and behind the lead sinker. Some fishing enthusiasts habitually hold the lead sinker and throw it out, at this time, the strength is very easy to be uneven, generally there will be a situation behind the bait and the lead sinker in front, and the line is very easy to entangle.

In the case of each cast, check whether the line is winding as much as possible, and if the winding is severe, you can separate the two hooks. In the case of fishing bait, if the strand has already been entangled, then everyone holds the long line in the right hand and the short line in the right hand, and after separating it, take the strand and cast the rod.

Different well-known brands and materials have different performance indicators and main performances. When using the subwire, it is necessary to slowly feel the material of the wire and the size of the line, the diameter of the cable is uniform, the whole line is soft, and the line table is smooth, and there is no three-dimensional feeling. The tensile strength value of the strand is basically achieved, the memory ability of the thread is low, and there is a certain repulsion between the two strands.

This good line is drained and then fully automatically scored (the surface layer is provided with a protective layer or by how to eliminate static electricity). It is not easy to get entangled when it is opened and lifted.

When fishing for raw fish, you can use a carbon line. This kind of strand material is hard, not easy to entangle, knotted. Overall, I'm in favor of buying a better strand, although it's more expensive, but it's well worth it.

Less disconnection, less entanglement, less line change, less fishing, and anything earns home.

Hooks with a steady tip tend to occur because it is very easy to catch fish in fishing situations. Although this has nothing to do with the strand winding, the hook tip is facing the other side, and if the strand is quickly turned heavily when the rod is raised, the strand will be wound. Therefore, when choosing a hook, you must pay attention to check whether the hook has a side orientation.

It is necessary to choose carbon wire or nylon wire as much as possible, separate the sub-line as much as possible, and the collocation of the main sub-line is as reasonable as possible, the main line should not be too thick, the pipe hook should be selected as much as possible, and the cylindrical space beans should be perforated as much as possible.

In the process of controlling the fish, you should grasp your own movements, learn the standard fishing posture, and the fishing bait should be placed in front, and the pendant should be placed in the back, so as to avoid the sinking of the plumb sinker and the line mixed together, and there must be a table fishing rod that supports the hand.

Usually when putting the fishing rod, there must be an order, must be the correct casting rod, do not bend the fishing rod in particular, do not bend too much, the hook should be light, the force can not be too violent, and the thickness of the lead skin should be appropriate and uniform.

I think that if you want to avoid this situation, the first thing is to choose the correct thickness of the lead fart, cut the thread end of the main line link to the figure eight ring, and you can also use a lighter to burn the thread, so as to increase friction, buy space beans do not try to be cheap, and the probability of winding the wire group accessories can also reduce the chance of winding.

When fishing, there is always a chance that the hook will become tangled. When fishing, don't choose a lead leather seat with lead trapping. Short mainline and. The end of the line connected by the figure-eight ring. Buy *** a little bit of space beans. It is necessary to learn to match the length of the strand line reasonably.