Is it better to eat a large amount of lead on a float or a small one? What are the correct uses of N

The amount of lead is the most basic parameter of the float, in fact, it refers to the buoyancy of the float, which can be roughly considered to be the net weight of the float level and the lead sinker from the bottom, and it will be much more convenient to figure out the amount of lead eating when the float is fishing.

The key to the floating to eat a large amount of lead or a small amount depends on the fish and rain conditions, among which the advantage of eating a large amount of lead is the stability of the line group, the main disadvantage is to sacrifice the sensitivity of the line group, and the advantage of eating a small amount of lead is that the sensitivity of the line group is high, the main disadvantage is to sacrifice the stability of the line group, in fact, the amount of lead eaten by the float is too large and too small will affect the fishing effect.

The amount of lead eaten by the float should be selected according to the fish and rain conditions, such as fishing shallow water, fishing clean water, fishing light mouth fish and slippery mouth fish, you can use a small amount of lead to float, fishing water depth, fishing water, fishing raw fish or wind and waves, you can use a float with a large amount of lead, in addition, the fish can be used to eat a small amount of lead in winter, and in autumn and winter, you can use a large amount of lead floating.

Launching: For fishing in calm seas, you can directly choose the No. 2 drift, but if there is a slight launching situation, you can cut the tin sinker to improve the upper pull and tighten the line set. If this method is not working, you must switch to No. 3 drift and then rub the large bait for fishing, which will make the line set dull and stable.

If the water flow is larger, the whole line group and the float will move horizontally, at this time, you can consider running lead, you must add 1 piece of tin sinker, change the float to No. 1, and then shorten the fishing line to improve the sensitivity.

Conversion of fishing float and fishing bottom: For the sea area with poor fishing water quality and many slippery fish, you can change the fishing bottom into a fishing float, if you use the No. 2 drift fishing bottom at the beginning, you must convert it into a No. 3 drift down fishing float. If there is still no mouth for the fishing float, you must change to the No. 2 float to fish the bottom.

If there is a small fish nest, it must be changed to No. 1 lead sinker to run lead fishing, which can effectively worry about false mouth signals.

It is not good for the float to eat too much lead or too small, among which the float to eat too much lead will reduce the sensitivity of the line group, and the amount of lead to eat too small will make the line group too sensitive, so when fishing, it is necessary to choose the float with the appropriate amount of lead according to the fish and water conditions.

It is good to eat a large amount of lead, and the No. 1 float is suitable for fishing shallow water, close fishing, light mouth fish or flying lead. The No. 2 float is suitable for medium-distance fishing in deeper waters. No. 3 float is generally used for deep water, long fishing, fast fishing, big fishing, and is often used when walking in the water, windy or unsightly.

According to the actual situation to determine, the most important thing is to choose the right one, in general, in the fishing of light mouth fish, fishing shallow water, better use.

Whether it is a float made of balr wood or reed, as long as their physical strength is the same, even if it is a float made of iron, the buoyancy produced by the water on them is the same.

But eating lead is different, eating lead is inversely proportional to the proportion of floating materials.

That is to say, if the float of the same volume, if the specific gravity of the material is larger, the smaller the lead will eat, but the smaller the specific gravity of the material, the greater the lead will be eaten. It can be roughly understood as a simple formula: the amount of lead eaten by the float = the buoyancy of the float - the weight of the float.

You should know that the size of the fish float generally refers to the amount of lead eaten.

Eating a large amount of lead is a big drift, and eating a small amount of lead is a small drift:

The amount of lead eaten by the float: grams for the trumpet float.

The amount of lead eaten by the float: 1-2 grams is a medium float.

The amount of lead eaten by the float: 2-3 grams for the large float.

After a preliminary understanding of the relationship between buoyancy, self-weight, and lead eating, it is easier to understand the relative sensitivity of floating.

For example, the buoyancy of two floats with the same volume and shape is actually the same, but due to the different materials, the float with a heavy weight eats lead and is relatively sensitive, and the float with a small weight eats lead, which is relatively late.

Is the amount of lead eaten by the fishing float the weight of the float itself?

Whether it is a float made of balr wood or reed, as long as their physical strength is the same, even if it is a float made of iron, the buoyancy produced by the water on them is the same.

But eating lead is different, eating lead is inversely proportional to the proportion of floating materials.

That is to say, if the float of the same volume, if the specific gravity of the material is larger, the smaller the lead will eat, but the smaller the specific gravity of the material, the greater the lead will be eaten. It can be roughly understood as a simple formula: the amount of lead eaten by the float = the buoyancy of the float - the weight of the float.

You should know that the size of the fish float generally refers to the amount of lead eaten.

Eating a large amount of lead is a big drift, and eating a small amount of lead is a small drift:

The amount of lead eaten by the float: grams for the trumpet float.

The amount of lead eaten by the float: 1-2 grams is a medium float.

The amount of lead eaten by the float: 2-3 grams for the large float.

After a preliminary understanding of the relationship between buoyancy, self-weight, and lead eating, it is easier to understand the relative sensitivity of floating.

For example, the buoyancy of two floats with the same volume and shape is actually the same, but due to the different materials, the float with a heavy weight eats lead and is relatively sensitive, and the float with a small weight eats lead, which is relatively late.

First of all, according to the length of the rod, choose the amount of lead to eat in the fish floatFishing rodsThe longer it isCast the rod, the more difficult it will be, so at this time, the amount of lead eaten by the fish float is relatively larger.

In general, the fishing rod can choose to eat the amount of lead of the fish drift, the fishing rod can choose to eat the amount of lead of the fish float, the fishing rod can choose to eat the amount of lead of the fish drift, as long as it can ensure that the cast can be smooth, the fish float can also be relatively reduced by a little bit.

The second is external factors, when fishing is windy weather, there will be difficulties when throwing, at this time it is obviously not appropriate to choose to eat a small amount of lead fish drift, the wind will generally be accompanied by the water, because the fish float in the water will be affected by inertia, so this time to choose to eat a large amount of lead fish drift, and even choose to run lead, heavy lead to resist the wind.

How to float and eat lead

When configuring the float lead consumption and the main line, you can match it according to the formula of floating lead consumption = (main line model + water depth) divided by 2. That is to say, when choosing the appropriate amount of float lead, it needs to be decided according to the selected main line model and depth. For example, when the main line model is selected is No. 1, when fishing at a depth of 2 meters, you can use grams to eat the amount of lead floating.

1. The amount of lead eaten by the float is the size of the float buoyancy, the buoyancy of the big float is large, and the matching lead sinker is also heavy.

2. The buoyancy of the two floats with the same volume and finger blind shape is the same, but the float with a large self-weight float eats lead and is relatively sensitive, and the float with a small self-weight eats lead and is relatively sluggish.

3. If it is two floats with the same amount of lead, the buoyancy of the self-weight must be large, the volume will be large when the buoyancy is large, and the resistance of the line will be large when the volume of the burner is large and the movement in the water will be great.

1. The amount of lead eaten by the float is the size of the float to tease the buoyancy, the buoyancy of the big float is large, and the matching lead sinker is also heavy.

2. The buoyancy of the two floats with the same volume and shape is the same, but the float with low self-weight eats small lead and is relatively sensitive, and the stall with small self-weight burns and floats eat large lead and is relatively sluggish.

3. If it is two floats with the same amount of lead, the buoyancy of the self-weight must be large, and the buoyancy will be large if the body finger is blind, and the resistance will be greater when the volume is large and the movement in the water will be greater.

I think bai fishing in the reservoir should depend on the weather, the wind from du.

However, factors, as well as the length of the fishing rod, the purpose of dao

Standard fish and other idiosyncratic elements choose to eat lead-sized floats according to the situation.

When I use a long rod to catch larger fish in the reservoir, I usually choose a float that eats more lead.

Because: 1. The buoyancy is large, and the heavier plumb will make the throwing rod easy and accurate into the nest;

2. Most of the waves on the water surface of the reservoir are large, and the float with large buoyancy can pull the main line between the drift and the plumb sinker very straight, which will make the float stable and the fish mouth obvious, and will not let the waves shake the main line and the float;

3. The buoyancy of the float that eats lead is also thicker, even if the float is far away or cloudy, it is more obvious, and it is not tired to see the drift.

Although eating lead will be a little ineffective, but this is a good way to filter the small fish in the reservoir to make hooks, the larger fish in the reservoir are basically raw, will not affect the mouth, a bite is a mouthful, are quasi-mouth.

I basically use a long rod in the reservoir to use a big drift, and when the wind and waves are strong, I catch away the lead, and the effect is very good.

If you use a short rod of less than 3.6 meters in the reservoir and the wind and waves are small, then choose to use a float with a small lead to adjust the grip.

The above is a personal opinion only.

Remove the volume of the drift body with the weight of the lead.

This process is obtained, and the lead coefficient is roughly matched. Then push back the volume, the length.

For example, the straight diameter of the drift body is 5 mm, the length of the drift body is 100 mm, and the lead gram is equipped when adjusting the 4 meshes. Tare weight grams. Cross-sectional area ( shoulder 18 + waist 70) 3 + middle section 12 = cylinder length) volume of the gourd) gram lead weight = means that each gram of lead weight, the volume that needs to be designed for drifting.

If you want to make No. 6, you want to match 2 grams of lead, if the diameter is still 5 mm 20 * total volume of drifting body 1476 cross-sectional area = length of the cylinder shoulder 18 + waist 70) 3 = middle section. Shoulder + 70 waist = millimeter length drift, which is about equal to 134 mm float.

Depending on what kind of fish you are caught, theoretically, you need to eat small drifts and be sensitive when fishing for small crucian carp. In addition, body drifting, especially shoulder drifting, also has an impact on sensitivity. If it is running water or windy, or if you are fishing for large size such as carp and grass carp, it is better to eat a large lead drift.

In general, the float should be selected according to the mouth and size of the fish, the mouth is light, the small body size is sensitive, and the reproduction can be used large float.

The size of the lead is not entirely the determining factor of the sensitivity of the float, but also the length of the drifting foot, the length of the drifting tail, and other factors.

Theoretically, the density of the drifting material is small, and the small float of the hard tail and foot is the most sensitive.

In addition, the recent popularity of jujube core floating, in fact, the scope of use of this drift is very small, only suitable for competitive crucian carp.

In the case of recreational fishing, the balshan float with a hard long tail, hard short legs, slender body and oblique shoulder is the most widely used and can be used to catch fish of various species and sizes.

The fish in the drift signal rod is not because the mouth is light, but because you are fishing too dull!

1.The amount of lead eaten by the float will generally be marked, and if there is none, it is best to measure it with a drifting bucket.

2.In addition to the weight of lead is related to eating lead, it is also related to the wind, generally less than 2 grams are not easy to throw under the slippery conditions without wind, at least about 3 grams should be frankly told, if it is a top wind, it should be about 5 grams.

3.The function of the drift is to provide a response, when the fish bites, by observing the fish float, you can know when you need to lift the rod, and you can also judge what kind of pure fish the bite is made.