How to force Xiaomi Mi 3 to flash, Xiaomi forced to flash method

1. First of all, confirm that the Xiaomi Mi 3 mobile phone has a "flash package" inside.

2. Turn off your Mi 3.

3. Press and hold the Volume and Power keys at the same time.

4. Enter the language interface, move the cursor with the volume key, select "Chinese Simplified", and press the power button to confirm.

5. Enter the flashing interface, move the cursor with the volume key to select "Install to System", and then press the power button to confirm. Wait for the system to be installed automatically.

6. After the system is installed and started, it will automatically start. Flashing successfully.

2.Copy to your phone's root directory.

3.How to enter recovery: In the shutdown state, press and hold the volume + power button at the same time to enter, and the screen lights up and releases the button to enter.

4.Select Chinese Simplified and confirm, volume key select Power key confirm, select will install to the system and confirm. Select Confirm and wait for completion, and then select Restart, System One.

2.Open the line brush, switch to the one-click brick rescue interface, and click the "OK" button after completing the "Confirm steps before flashing".

3.If you have a local brushless package, you can enter the model in the search box, click the "Search ROM" button, and click the "One-click Flash" button in the search results to start flashing the package-**After completion, click "Flash Now" to start flashing:

4.If there is already a flash package locally, click the "Select Local ROM" button to open the interface for selecting a RAM package, and click the "Open" button after selecting the flash package

5.Enter the parsing package page

6.After the unpacking is complete, start scanning the flashing port:

7.Install the flashing driver:

If it is the first time to start the line brush, or you have not installed the flash driver, please click "Fully automatic installation of the flash driver":

Enter the installation driver interface, if the Windows security prompt pops up, click "Always install this driver software":

8.After installing the driver, if the port cannot be scanned for a long time, you can manually enter the flash mode according to the interface operation guide

10.Jump to the flashing success interface, and the flashing is complete!

1. First confirm Xiaomi Mi 3

Inside the phone there is "Flash.

Pack. <>

2. Turn off your Mi 3.

3. Press and hold the Volume and Power keys at the same time.

4. Enter the language interface, move the cursor with the volume key, select "Chinese Simplified", and press the power button to confirm.

5. Enter the flashing interface, move the cursor with the volume key to select "Install to System", and then press the power button to confirm. Wait for the system to be installed automatically.

6. After the system is installed and started, it will automatically start. Flashing successfully.

3. When restarting the phone, press the volume down and power button at the same time to enter the line brush mode to flash the phone.

Operating environmentMake model: Redmi Note 8 Pro

System Version:

The forced flash mode is the line brush mode of the mobile phone, and when you restart the phone, you can enter it by pressing the volume down and power button at the same time. Turn on your phone and go to your phone's desktop.

At this time, press and hold the power button, choose to restart the phone, and press the volume down and power on buttons at the same time when restarting.

Then you will enter the fastboot mode of the phone, which is the line brush mode.