Can electric fans be cleaned? How to clean an electric fan?

We are happy to answer for you, it is best not to flush the motor with water, washing the motor with water will cause the insulation of the motor to decrease, which can easily lead to leakage or burn the motor. You can disassemble the cover of the electric fan, remove the fan blades, clean the fan blades with water, and the motor only needs to clean the dust, and by the way, lubricate the bearings.

Ordinary floor fans, table fans, page fans, etc., are relatively simple to disassemble and clean, and can generally be disassembled, and the fan blades and cover can be washed with water after being removed. The most important maintenance part of the electric fan is the motor, and to maintain the motor, the screws should be removed, mainly to check whether the bearings and gears of the motor need to be oiled. Nylon gears are particularly fragile and need to be maintained regularly, which can be dripped with engine oil or ordinary gear oil to lubricate and maintain.

The electric fan cannot be cleaned directly, and the fan blades need to be removed and cleaned separately.

Hope mine is received by yours.

<> "Fan Cleaning. First of all, disassemble the fan.

First of all, observe whether your fan has been cleaned when it is taken out, if there is too much dust on the fan blades, the wind will definitely not seep into the ridge, and it will consume more electricity. So when we want to clean, first of all, we must remove the outer cover of the fan, and after removing the knob in the middle of the fan, you can directly remove the fan blades of the fan, and you only need to remove it in the order of rotten.

Clean up the motor oil.

So what's the situation when there's no wind? First of all, if the TV is whirring and rotating,The working fan blades are normal,That is, your fan blades are likely to be deformed,Or the speed of the fan's motor is decreasing,Causing the fan to rotate but there is no wind or little wind,Then let's make sure the fan is clean,Check if the motor is oily,If so, clean it,Then put on some lubricant。

Adjust the orientation of the fan blades.

Because the working principle of the electric fan is to promote the flow of air cherry ridges, the blades are inclined at a certain angle, that is to blow the wind forward, then if there is no wind, it is likely to be because of the angle of the blades, we can tilt each blade at a certain angle according to the direction of motor rotation, but pay attention to the angle should not be too large, so as not to touch the cover and produce shaking.

Tools needed: baking soda, toothpaste, vinegar, and scouring pads. Here's how:

1. First, add two spoonfuls of baking soda to an empty basin. Baking soda is alkaline and has a strong decontamination ability.

2. Then add toothpaste, which also has a strong decontamination ability.

3. Then add some toilet water, the fresh taste of the flower water can remove the odor.

4. Then add water and stir well.

5. Cut the scouring pad into connecting blocks as shown in the figure below.

6. Then soak the scouring pad in the solution and wring it out, and wipe the surface of the fan with the scouring pad, which can well absorb the dust on the fan.

Note: If you clean the electric fan by yourself, be sure to cut off the power supply in advance, you can use a damp rag to scrub it, but be sure to wipe the water on it dry after cleaning.

The most important maintenance part of the electric fan is the motor, and to maintain the motor, the screws should be removed, mainly to check whether the bearings and gears of the motor need to be oiled. Nylon gears are particularly fragile and need to be maintained regularly, so you can use home sewing machine oil or ordinary gear oil to drip on them to lubricate and maintain.

Ordinary floor fans, table fans, page fans, etc., are relatively simple to disassemble and clean, and the fan blades and cover can be washed with water after being removed. In some families, there may be some smoke stains, oil stains and other hard-to-remove stains in the fan blades of the electric fan, which can be washed off with a detergent that removes oil fumes, which only involves the surface of the fan, not the inside of the machine.

Remove the barbed wire fence and soak it in water for 10 minutes, put detergent such as washing powder or dish soap in the water, and then brush it with a large brush. Spray it with a shower head and it will be shiny. My mom washed it that way every year. Hey. I've proven it works.

Teach you how to clean an electric fan.