How to clean the fan, electric fan cleaning tips

Teach you how to clean an electric fan.

1. Cut off the power supply of the fan and remove the protective net of the electric fan. There are cards around the protective net, after loosening the card, unscrew the screws, and the protective net can be removed.

2. Then remove the fan blades, unscrew the round plastic cover in the middle of the front of the fan blade, and you will see a small section of the shaft exposed. Different models of electric fans have slightly different designs, and some need to remove the small screws on the side of the fan blades.

3. Add water and detergent to the cleaning basin, carefully scrub the protective net and fan blades, the detergent can be used laundry detergent or detergent and other commonly used household products, but do not use oil-based detergents such as gasoline, because oil-based detergents will cause corrosion to paint and plastics, damaging the appearance and even life of the electric fan. Then scrub the small parts and body with a cloth dipped in detergent, and after the cleaning is complete, dry all the parts with a clean dry rag and let them dry in a ventilated place for a little longer.

Note: If you clean the electric fan by yourself, be sure to cut off the power supply in advance, you can use a damp rag to scrub it, but be sure to wipe the water on it dry after cleaning.

The most important maintenance part of the electric fan is the motor, and to maintain the motor, the screws should be removed, mainly to check whether the bearings and gears of the motor need to be oiled. Nylon gears are particularly fragile and need to be maintained regularly, so you can use home sewing machine oil or ordinary gear oil to drip on them to lubricate and maintain.

Ordinary floor fans, table fans, page fans, etc., are relatively simple to disassemble and clean, and the fan blades and cover can be washed with water after being removed. In some families, there may be some smoke stains, oil stains and other hard-to-remove stains in the fan blades of the electric fan, which can be washed off with a detergent that removes oil fumes, which only involves the surface of the fan, not the inside of the machine.

When cleaning the electric fan, we need to cut off the power supply, then remove the protective net and fan blades, and then wipe the protective net and fan blades with a rag dipped in water with detergent, and then dip the appropriate amount of detergent on the rag to wipe the small parts and body of the fan, wipe it with a clean rag after cleaning, and reassemble it after drying.

Electric fan cleaning method.

Electric fan is a more common electrical appliance in our life, in the summer when the weather is hot, basically for a few months will be used, but after a long time, it will inevitably be stained with some stains, dirty, etc., which will affect the aesthetics, at this time it is recommended that it is best to clean it up in time.

When cleaning the fan of the electric stool, we must first cut off the power supply, then remove the protective net of the electric fan, and then remove the fan blades after dismantling, then prepare a basin of clean water, add detergent to it, and then use a clean rag to scrub the protective net and fan blades inside and out.

Then dip a little detergent on the rag and scrub the small parts and body of the fan, be careful not to use oil-based stain remover, so as not to corrode the paint and material of the fan and damage the fan. After the cleaning is completed, scrub all the parts on the fan with a clean rag, and then put it in a ventilated place to dry and then reassemble it.

1. First of all, you need to move the dusty fan out and put it in an area that is convenient for movement.

2. Make a basin of water, and ask for soapy water in the water or a waiter to wash simple potato detergent, etc.

3. Prepare the screws, etc., remove the fan, and put away the removed screws.

4. Wipe the shell of the fan with a wet towel first, and clean it with a steel wool ball if it encounters more stubborn dust.

5. To clean up the fan activity page, you need to pay attention to the edge to prevent scratching your hands.

6. Clean the dust from the corners with a brush.

7. During the cleaning process, do not drop water droplets into the fan line to prevent the fan from being energized.

8. After cleaning and drying the fan for a period of time, you can continue to use it after reinstallation.

Tools needed: baking soda, toothpaste, vinegar, and scouring pads. Here's how:

1. First, add two spoonfuls of baking soda to an empty basin. Baking soda is alkaline and has a strong decontamination ability.

2. Then add toothpaste, which also has a strong decontamination ability.

3. Then add some toilet water, the fresh taste of the flower water can remove the odor.

4. Then add water and stir well.

5. Cut the scouring pad into connecting blocks as shown in the figure below.

6. Then soak the scouring pad in the solution and wring it out, and wipe the surface of the fan with the scouring pad, which can well absorb the dust on the fan.

Tools Materials: sponge eraser, knife, edible alkali, screwdriver, double-sided tape, chopsticks, washbasin.

The steps are as follows: 1. First prepare a sea surface rub, and use a knife to cut the sponge wipe into a grid.

2. Then we prepare a bottle of alcohol, put it in a bowl in an appropriate amount, and then rub it with a cut sponge to extract some alcohol.

3. Wipe the disassembled fan grille with a sponge dipped in alcohol, alcohol has a super decontamination ability, and the general dust and dirt can be wiped off with a wipe.

4. Next, clean the fan blades, prepare a basin of water, then add an appropriate amount of edible alkali, and stir it with your hands.

5. Soak the fan blades in water and wipe them with a sponge. Edible soda has a cleaning effect, and the fan blades can be easily cleaned.

6. Finally, clean the fan turning head and unscrew the screws of the rotating head with a screwdriver.

7. Glue the double-sided tape to the chopsticks, and then use the chopsticks to stick the dust from the gap between the rotating heads.

8. The last step is to dip a little alcohol and wipe the base clean, and then the fan is cleaned.