How to clean the electric fan and how to clean the electric fan

It can be cleaned with dish soap + baking soda + toilet water.

The method is very simple, prepare a small bowl and squeeze in a little dish soap, which has a particularly good ability to remove dirt, and then pour in a little baking soda, baking soda is an all-purpose detergent, and it cleans particularly strongly. Add a few drops of toilet water, which can make the cleaned electric fan emit a fragrant smell, and it also has a certain mosquito repellent effect.

After the previous summer's work and the autumn and winter storage, the protective net and fan blades of the electric fan have accumulated thick dust, and if the electric fan is used directly without cleaning, the dust will be dispersed into the air with the rotation of the fan blades, causing pollution.

Before cleaning the electric fan, cut off the power supply to prevent electric shock. If you come across an electric fan that is just about to be cleaned, wait for its blades and engine to cool down before operating.

When the electric fan is in a complete state, it is difficult to clean the dust on the fan blades with a rag, first remove the protective net of the electric fan, generally speaking, the fan box and the floor of the electric fan, in the design, have the characteristics of convenient installation and disassembly, and there is no need for disassembly tools here.

When disassembling the electric fan, rotate the buckle on it in a certain direction to fix the screws of the fan blades, which need to be disassembled with a screwdriver, generally a plum blossom or cross-shaped screwdriver, and after removing the screws, you can take down the protective net.

Wipe the fan blades clean with an absorbent cloth. This should be wiped with the right hand while rotating the fan blade with the left hand so as not to leave dead spots. In addition to cleaning the fan blades and protective net, some other parts of the electric fan also need to be cleaned.

Electric fans need to be cleaned regularly, otherwise the air quality they inhale will be affected.

Teach you how to clean an electric fan.

1. The electric fan is simple and clean: firstly, ensure that the cleaning steps are carried out in the state of power-off to ensure the safety of the cleaning process, and secondly, it is recommended to prepare cleaning tools and disassemble tools such as electric fan screws.

2. Remove the shell of the electric fan first, this shell is generally a mesh protective cover to protect the fan blades, because it is fixed, so it is best to use a screwdriver to remove the screws, and then remove the protective net.

3. Then disassemble the fan blade, generally the dust on the fan blade is the most, you can use a tool to remove the fan blade, because the fan blade is the same as the windmill, using a shaft to fix together, so the fixed screw can be unscrewed, generally the current fan is not the same, so different fan disassembly is also a different step, if the fan bearing is not too dirty, you can also use a wet towel to wipe the dust on the fan blade clean without disassembly.

4. If the fan blade is disassembled, put the fan blade into clean water and rinse with clean water, if the dirt is serious, you can add a small amount of dish soap to clean, and finally rinse with clean water, and then dry it. The same is true for fan covers.

5. Other parts of the electric fan can also be wiped clean with wet towels, including the shell, buttons, etc., pay attention to the wire parts of the electric fan and try not to use wet towels to wipe them, so as not to penetrate into the circuit and damage the bright code of the electric fan, and the bearing of the electric fan should also add an appropriate amount of lubricating oil to ensure the smooth rotation of the fan blades.

6. Finally, install the dried fan blades and install the protective cover, after the installation is completed, under the condition that the electric fan is dry, it can be powered on for trial operation.