The handmade practice of bamboo dragonflies, the production process of bamboo dragonflies

Bamboo dragonfly is a very delicate invention in ancient China, mainly as a children's toy. When playing, rub your hands together, and then let go of your hands, the bamboo dragonfly will fly into the sky, spin for a while, and then fall. This simple and magical toy once amazed Western missionaries and called it the "Chinese spiral".

Let's relive the fun of childhood with the handicraft network, make a handmade toy for the child, you can take the child to do it together, and enjoy the parent-child time between father and son.

Tools Raw materials.

A piece of wood, size 20*3*cm.

A small cylindrical wooden stick, about 20 cm long and 3 mm in diameter.

Knife, glue, fine sandpaper.

Method steps.

Make a hole in the middle of the small wooden block first, the diameter of the hole is slightly smaller than that of the small wooden stick, so that the small wooden stick can be clamped tighter.

Please click Enter a description.

Use a knife to cut small wooden blocks, starting from the middle position and cutting to the side, cutting into an inclined plane, high on the outside and low on the inside.

Please click Enter a description.

The back side is also processed to make the whole a bevel.

Please click Enter a description.

The other side is processed in the same way, and then the cylindrical stick is fixed in the hole in the middle of the small stick, and if it feels loose, apply the appropriate dispensing solution.

Please click Enter a description.

If you're a perfectionist, use sandpaper to polish the burrs on the leaves. You can also give it some color, pattern.

How to play: Put the handle of the bamboo dragonfly - a small wooden stick in the palm of the hand with both hands, rub the right hand forward, when the right hand rubs to the end, the bamboo dragonfly will fly out, the greater the strength of the rubbing, the faster the rubbing, the higher the bamboo dragonfly will fly, the longer it will fly.

Please click Enter a description.

Materials to prepare:

1. A piece of wood, about 20 cm long, about 3 cm wide, and about cm thick (its practical bamboo chips are better to make, but wood is easier to get.) ）

2. A small wooden stick, cylindrical, about 25 cm long, about 3 mm in diameter (slowly cut from wood or bamboo, as symmetrical as possible, it is best to prepare a longer one first).

3. A sharp knife (please pay attention to safety).

4. Glue (non-essential).

5. Fine sandpaper (a must for those who strive for excellence).

Production steps: 1. Make a hole in the wood chip first, control the diameter, and be slightly smaller than a small wooden stick.

2. The back side is also processed, so that the wood is cut into an inclined surface. Let's take a look at the effect from the side:

3. Do the same at the other end, and then we fix the small wooden stick into the hole we just made. If it feels loose, use glue!

4. If you're a perfectionist, take out the fine sandpaper and polish the blades well. You can also give it a little color and pattern to make it even more different.

How to fly a bamboo dragonfly: First use the tip of your right palm and the root of your left palm to clamp the handle of the bamboo dragonfly, and then quickly rub your right hand forward, just like rubbing a cigarette roll. When you reach the end, let go of your hand and the bamboo dragonfly flies out!

The bamboo dragonfly is made as follows:Preparation materials: 4 rectangular sheets of paper.

First, fold three rectangular pieces of paper into long strips of consistent size.

Second, fold the paper in half and press it tightly.

3. Fold them in half separately.

Fourth, take out two of them and cross them together.

<>6. What the third article looks like after passing through.

7. Then tighten the paper strip and sort out the shape, as shown in the figure below.

8. Roll a bamboo dragonfly stick with a rectangular strip of paper.

9. Put the finished bamboo dragonfly on the stick and it's done.

Prepare materials: pliers, boards, nails, etc.

3. Then use the tube as a template and draw circles on its foam board.

8. The assembly is complete, so that the simple bamboo dragonfly is made.

Material 115cm long, 2cm wide, 1cm thick flattened bamboo or light wood block 2A small bamboo stick (about 15cm long).

A small saw, a utility knife, a ruler, a hand drill and quick-drying glue.

Do you want to make a bamboo dragonfly yourself? Follow the steps below to give it a try:

Step 1Take a piece of light wood and use a saw and other tools to process it into a piece of wood that is 15 cm long and 2 cm wide and thick.

2.Use a ruler to measure the point at the center of the block. And use a pen to make a mark at the center point, and then draw a line about the center point on both sides, (the top and bottom of the wooden block should be drawn).

3.Cut the part of the diagonal line into an inclined plane with a utility knife.

The processing method is as follows:

Use a small saw to make a slit on the upper and lower parts of the line.

The upper saw seam on the left side is required to be "low on the outside and high on the inside", and the lower saw seam is high on the outside and low on the inside".

The upper saw seam on the right side is "high on the outside and low on the inside", and the saw seam on the bottom is "low on the outside and high on the inside".

At the lower end, a sawn slit is deep in millimeters from the bottom surface of the bottom chip.

Use a utility knife to cut off excess wood from the left and right sides of the saw in the center of the two directions.

4.Make a small hole with a hand drill in the center of the block.

5.Take a wooden stick about 14cm long, cut the upper end to a suitable size, coat it with white glue and insert it into the center hole of the bamboo piece.

6.Rub the bamboo stick at the lower end of the bamboo dragonfly for a test flight.

Recommended on 2018-04-29

Bamboo craft-Jingdong home, a beautiful new life, leading a new life!

Larsen steel sheet pile construction, Xinhao Jin, steel sheet pile construction, Larsen steel sheet pile construction, large-scale steel sheet pile machinery and equipment leasing, undertake the construction of all projects related to steel sheet pile, rich construction experience, ** affordable! Ad.

How to make bamboo dragonflies, how to make traditional toys, have you learned it?

The practice of handmade bamboo dragonflies is as follows:Preparation materials: 4 rectangular sheets of paper.

First, fold three rectangular pieces of paper into long strips of consistent size.

Second, fold the paper in half and press it tightly.

3. Fold them in half separately.

Fourth, take out two of them and cross them together.

<>6. What the third article looks like after passing through.

7. Then tighten the paper strip and sort out the shape, as shown in the figure below.

8. Roll a bamboo dragonfly stick with a rectangular strip of paper.

9. Put the finished bamboo dragonfly on the stick and it's done.

The practice of handmade bamboo dragonflies is as follows:

Material preparation: 1) Jam paper: about 3x10cm (2 sheets).

Note: The ** of the cardboard can be biscuits, ** and other packaging boxes, paper handbags can also be, try not to choose too heavy packaging cardboard, the size of the source is not absolute, parents can adjust according to their preferences. Concealment.

2) Straw: about 15cm (1 piece).

Other materials: tape or staplers, scissors, pens, rulers, compasses, etc.

Steps: 1. A total of 4 sheets are required, which can be the same color or different colors. Glue the two sheets together with double-sided tape.

2. Then, prepare a 15 cm straw, cut one end by centimeter, and clamp the two pieces of origami that have been glued.

3. Use a mini stapler to secure the origami and straws.

4. Fold two pieces of origami 30 degrees in opposite directions.

Bamboo Dragonfly:

Bamboo dragonfly is one of the traditional Chinese folk children's toys, which is widely spread. The bamboo dragonfly consists of two parts. One is the bamboo handle. The second is "wings". When playing, rub your hands together, and then let go of your hands, and the bamboo dragonfly will fly into the sky.

After spinning for a while, it will fall. It is a very ingenious little invention in ancient China, this simple and magical toy, once amazed Western missionaries, called it the "Chinese spiral". In the thirties of the twentieth century, the Germans invented the propeller of *** according to the shape and principle of the "bamboo dragonfly".

The shape of the bamboo dragonfly is T-shaped, the horizontal piece is like a propeller, there is a small hole in it, in which a straight bamboo stick is inserted, rub this bamboo stick with both hands, the bamboo dragonfly will rotate and fly into the sky, and only fall to the ground when the lift is weakened.