Handmade violin making and installing, how to install the holder on the violin

Put the violin first.

1. First take out the shoulder rest of the violin, and then adjust the buckles on both sides.

<>3. After the card plate is ready, push the violin shoulder rest up until it can't be pushed.

4. Done. <>

1. First take out the shoulder rest of the violin, and then adjust the buckles on both sides.

<>3. After the card plate is ready, push the violin shoulder rest up until it can't be pushed.

4. Done.

It should be a violin shoulder rest.

Violin shoulder rest installation method:

The first thing to look at is the length of the neck to determine if you need a shoulder rest. If it's a regular spring shoulder pad, you can put both feet on the body, and it will be more comfortable to tilt slightly towards the cheek rest. If you still feel uncomfortable, you should change to shoulder lifts.

Adjust the height of the shoulder pads until they fit.

On the back plate, the new violin shoulder, the tocard, and the violin back plate are good.

What piano holder? It's a shoulder rest, right?

My violin only has a shoulder rest! There is no piano holder!

If it's a shoulder rest, you can ask me!

I'll give you a good answer! Thank you!

The long-legged ones are on top.

The short-legged ones are underneath.

Press on the tail. It looks tilted to the right.

Go to the piano shop and let the people in the piano shop help you install it!

When installing the violin, <> should be carefully operated according to the instructions and the steps of the violin, and you can choose to let a professional assist in the installation, so that the tone and quality of the violin can be kept in the best condition. The strings of the violin should be installed in the order from the treble strings to the bass strings to prevent knots and other phenomena, and the strings should be straightened as much as possible to avoid the strings becoming loose.

The process of making a violin is as follows:

1. Material: Spruce top that has been dried naturally for more than ten years, and the back plate is maple, which can ensure the mellow sound of the violin.

2. Imposition: It is a more important process in the production of violin virtual core ridge, the cut template is spliced together, the amount of adhesive used needs to be controlled, and the coating should be even, which needs to be carried out in a dry environment.

3. Scraper: This step needs to be made by a master who has been making violins for many years, cut the template into the approximate shape of the violin, and use a knife to scrape it evenly little by little until the rough side of the panel is polished into a bright surface.

4. Sound hole sound beam: The engraved sound beam is to carve the iconic sound hole of the violin on the scraped wooden board and install the sound beam.

5. Heqin: In this step, the prepared panel and back plate need to be glued and fixed with pigskin glue to form a complete piano case.

6. Suiqin: It is mainly necessary to polish the appearance and the appearance of the entire piano case.