Glass tea set, what should I do with the crack? It s been more than a year.

Method 1: Cleaning:

Place the porcelain in a relatively soft plastic basin, wash off the topsoil with clean water, and then use a knife to gently scrape off the rust in a straight direction with the surface of the vessel, but not with the tip of the knife.

scratch so as not to damage the glaze.

Method 2: Fill in the gaps.

Filling the defect refers to a process in which the artifact is still partially damaged after splicing, or the part that has been damaged is supplemented with repair materials.

There are generally two situations in which vacancies can be filled:

First, there are partial defects on the edge of the mouth or the abdomen and bottom of the utensil, which need to be supplemented. This is the most common case of artifact damage, and it is also one that is relatively easy to repair. The original preservation block can be sampled with proofing paste to restore the incomplete part.

Second, the incomplete part has nowhere to turn the mold on the original artifact, so it can only refer to the modeling characteristics of similar utensils, make the mold first, and then turn the mold to restore. In this method, when determining the shape of the missing parts, it is necessary to be cautious, and it is necessary to find the exact basis for restoration - the reference object.

If you can't find a reference, you would rather let it be defective than make it up at will.

1. I have heard of the cracking of glass heating water, but I have not heard of glass and cold water will also crack. Maybe you're buying a shoddy product.

2. It could also be that you accidentally collided while washing the cup, and you still don't know it.

I think if it's glass, just throw it away.

The glass tea set with a crack, if you get it right, will cut your mouth, but the gain outweighs the loss.

Or if you get hot water and accidentally scald yourself, it will be more than worth the loss.

And even if there are no hidden dangers of safety, a glass tea set cracks, that psychological feeling is different, this kind of greatly discounted experience, there is no need to endure it, and now you don't have much money to buy a set of glass tea sets.

No, it can only be replaced, and the glass still has an interface even if it is bonded.

The crack can be left alone on the outside, but on the inside or in the middle, its brittleness is greatly increased, if it is not important, change it to a new one.

If the glass bowl breaks a small hole, the glass bowl should not be used anymore, and throw it away, so as not to scratch your hands from the small hole in the glass bowl.

The first thing I want to say is that duduyt is boring!

The way to solve the crack is: at the innermost end of the crack (that is, the front end of the crack), punch a hole, the glass will not continue to crack, the hole will produce noise, ash, dew and rain in the driving, and seal the hole with Huitian glass glue (you can also use AB glue).

It doesn't tend to expand in the summer, but it is especially easy to crack when washing the glass in the winter, so it doesn't matter if the opening is small.

There is no good way to do it at the moment! Most of the cart methods are to punch holes at the top of the crack to prevent further listing! But the sedan doesn't fit well! Driving at high speeds will produce wind noise!

It's better to get a new one, after all, safety comes first.

It is not appropriate that the Chaoyang tires you bought have been used for more than a year and there are cracks, if you don't use them properly, it is a quality problem!

First of all, you must find a business that will give you a tire to be loaded, and he will be responsible for such a problem, whether to change the tire or refund the money to negotiate and solve it.

If the company that gave you the tires does not admit the quality problem, you will first find the 12315 Consumer Association for mediation, and the people's court will not be able to sue if the mediation fails.

Whether it is mediation or litigation, there must be evidence such as shopping invoices.

If there is a crack after one year of use, you can negotiate with the manufacturer to see if it is not within the warranty time.

Hello master, then you take the invoice, to buy the tire to find it, is to go through the identification, certification and other processes can be replaced, if it is your responsibility can not be replaced, such as on the road teeth or scratches and other think that it will not work, thank you!

The first thing to look at is the location of the crack in the bathroom basin. If the location of the damage is relatively high, if the leakage is not serious, you can feel the leakage to decide how to deal with it. If the upper end of the edge does not affect the use as long as the basin is not satisfied, you can ignore it at this time.

If the position is relatively low, you can use plasticine or other impermeable pastes to block it.

The cracks of the wash basin must be replaced, if the water does not penetrate the water, it will not last long to apply the glass glue below, ** from about 200 to about 500, precautions for using ceramic wash basins.

Do not flush into the ceramic wash basin with items that are easy to be blocked;

In order to prevent the ceramic wash basin from being damaged and leaking, please do not hit the ceramic;

When the ceramic wash basin is clogged, please immediately remove it with a skin suction device;

Water cannot be used and stored below 0°C;

In order to prevent the expansion of the cement from bursting the bottom of the toilet, glass glue must be used for installation.

Usual cleaning: Porcelain exterior soft bristles or sponge with neutral detergent cleaning, but do not rinse with hot water or directly into hot water, so as not to crack the basin. If you want to use a basin for water, put cold water in hot water to avoid burns.

Regular maintenance: The lower water storage bay can be removed to remove the accumulated stains and keep the drainage smooth.

When cleaning the basin, try to use a sponge to clean it with detergent, remember not to use a vegetable melon cloth, or use a hard brush, acid and alkaline chemicals or solvents to wipe and scrub, because it will form small scratches on the surface of the basin, making it rough and easy to deposit dirt.

Change the bad habit of placing items on top of the basin.

Find a master of the source industry, or it is the reason for the quality of the product Originally, he was.

Du glued with transparent glue It may be that there are gaps in the transportation or handling of any hard items that make it appear Qualified products do not have any gaps! Otherwise, you can sand it with water sandpaper and hit it on the side of the seam to see if he has any other seams, or you can find a merchant and ask him to change it for you. The most direct thing is to find someone to curium.

It is also convenient.

When I was a child, the pots and jars at home were cracked, so I found a professional master to fix them, and I ordered them for him like a large staple.