How to clean the cement on the stone of the burned surface?

How to clean the cement on the stone of the burned surface?

1. We can use stone cleaner to clean the cement. There are cleaners on the market that specifically target stubborn stains such as cement that remains on stones, tiles, etc. After you buy a special detergent, you can sprinkle water on the stone cement dirt to wet the stone, and then pour an appropriate amount of cleaning agent on the stone according to the product instructions, and paint it evenly with a brush, and rinse it with water after standing for 1-4 hours.

2. We can also use oxalic acid to clean the cement on the stone on the burnt surface, because oxalic acid will react with the cement and have the effect of removing the cement. We pour an appropriate amount of oxalic acid into the stone cement dirt, and then use a sponge rod to scrub the cement dirt repeatedly, and finally rinse it with a large amount of water. However, oxalic acid has a certain degree of corrosiveness, we must not only do a good job of safety protection measures during construction, but also avoid oxalic acid corroding the surface of the stone.

No matter what cleaning materials you use, you must try a small amount of them first to ensure that they are effective and will not harm the stone, so that they can be used on a large scale.

What to pay attention to in stone cleaning and maintenance

1. When we clean and maintain the stone, do not wax the stone at will. There are many types of wax on the market, if we choose the wrong wax, then the wax will not only fail to protect the stone, but will also block the holes of the stone to form wax scale, resulting in yellowing of the surface of the stone and so on. If we need to wax the stone for maintenance, you can choose to use wax under the guidance of professionals.

2. There are stone floor tiles laid at home, and it is best not to cover carpets and other items on the surface of the stone for a long time, otherwise the moisture in the stone will not be volatilized. There is a large amount of moisture in the stone, which can easily cause stone lesions. In daily life, do we use vacuum cleaners and other tools to clean up the dust and gravel on the surface of the stone?

If you use detergent to clean the dirt on the surface of the stone, you should try to clean it with neutral detergent and so on.

I usually use oxalic acid for treatment, and the results are very good. After construction, large vats of oxalic acid (liquid) are purchased and poured on top of the stone, and the operator should wear rubber gloves and scrub them repeatedly with high-density sponge swabs, and the cement mortar will be removed quickly. Then rinse the floor with clean water and it's OK.

I built a large area of the square cleaned in this way.

Cement spots are still relatively difficult to clean, you can use Sino cement thin layer cleaner to clean them, other cleaning agents have no effect on cement marks.

The small shovel shovel is dropped.

Cement cleaning method steps on the fire board:

1. If the cement pollution is not very serious, you can try bright stone powder, which is a conventional stone surface cleaning product, which can remove various stains and oil stains on the surface of the stone. The product is in the form of powder solid, which becomes a liquid slurry cleaner after rubbing, so as to achieve the effect of cleaning stains on the surface of the stone. Bright stone powder is only effective in removing stains on the surface of the stone, if the stain has penetrated into the inside of the stone, please choose a marble cleaner or granite cleaner according to the type of stone.

2. If the cement pollution is serious, it is recommended to use professional ceramic tile cleaning and care products; Oxalic acid and other products used on the market are easy to damage the surface of the stone due to the strong acid-base reaction. There are ceramic tile cleaners on the market that are specially designed for stubborn stains containing calcium carbonate such as cement scale, lime scale, and grout residue left on the construction surface of ceramic tiles, stones, and antique bricks.

3. It is best to test a small area of inconspicuous places such as wall corners first. If it is effective, clean up a large area.

You can also try marble rust remover, which can quickly penetrate into the stone to transform rust, change the rust part, quickly restore the original color of the stone, and do not seriously damage the surface of marble and limestone, which is a colorless and odorless environmentally friendly rust removal cleaning agent. It can clean the surface of the stone, deep rust, stains and yellow spots.

If the cement has dried thoroughly, it can be dissolved with an acidic substance to remove it. If there is cement agglomeration on the ground or in the sewer, pour in hydrochloric acid solution, and wait until it is dissolved, then wipe it clean. But be careful with the dosage.

Hello, very happy for your question, there are two methods 1, physical removal: the physical removal method is relatively simple and violent, using abrasive grinding and polishing to remove the yellow spots on the burnt plate until it is ground off. This method is still more suitable for the uninstalled fire plate plate, those installed stone or special-shaped stone use this method is not very applicable, and also labor-intensive materials, the cost is relatively high.

The important thing is that the post-effect is not very good, because the plate can only be polished with a small walk-behind mill after installation, so the post-effect is not ideal. 2. Chemical removal: According to the relevant laws of chemical reactions, the original reaction is neutralized, and then the effect of removing stains will be realized.

For example, iron reacts with water oxidation to produce rust. The main component of rust is a mixture of iron hydroxide and ferric hydroxide.

Therefore, as long as we use a targeted approach and the right chemical reagents, we can easily and concisely carry out the removal work. Here it is recommended to use Sino Super Rust Removal King, which is suitable for rust stains on the surface of marble, granite, ceramic tiles and other substrates. Hope mine can help you.

Solution:1The cement imprint on the surface of granite can be wiped with diluted oxalic acid water [the concentration can be from dilute to concentrated to achieve the removal effect] and then mopped with clean water, or find a professional cleaning company to use a cleaning machine with acidity.

Dear, I am glad to answer for you: how to clean the cement mortar on the fire board A: If the cement pollution is not very serious, you can try bright stone powder, you can use stone cleaning agent to clean the cement.

There are detergents on the market that are specially designed for stubborn stains such as cement and other stubborn stains on stone and ceramic tiles, and the burnt board is the granite surface burned with liquefied gas and oxygen through a high-temperature flame, due to the uneven expansion of the heat, and the formation of a little concave and convex like the same effect as the lychee surface, which has an anti-slip effect. Granite ignition panels can be applied on sidewalks, highways, interior floors and walls. The burned surface is mainly used in municipal paving projects (such as sidewalks, slippery squares, and community beautification).

The burnt surface can also be used as a dry-hanging exterior drywall.

Abstract: Hello, first look at the degree of cement pollution, if it is not a lot, you can use bright stone powder, this cleaning agent can be very simple to clean the cement on the surface of the fire board, but the bright stone powder only has an effect on the surface of the fire board, to carry out in-depth all-round cleaning, it is recommended to use a special cleaning agent or granite cleaner with high strength.

How to clean the cement on the burnt board.

Hello, first look at the degree of cement pollution, if it is not a lot, you can use bright stone powder, this cleaning agent can be very simple to clean off the cement on the surface of the fire board, but the light stone powder only has an effect on the surface of the fire board, to carry out in-depth all-round cleaning, it is recommended to use a special cleaning agent or granite cleaner with high strength. If the cement is heavily contaminated, it is recommended to use ceramic tile cleaning care, such as Qiangli Porcelain Jieling.

You see, that's it.

Hello, it is recommended to use strong porcelain Jieling, which has a relatively high degree of pollution, is it sold on the Internet.

They are sold online, or they are furniture stores.

Can the home furnishing store be removed.

If it can be removed, the decontamination effect is very strong.

Summary. Fire surface stone is widely used in subways, airports, squares, exterior wall dry hanging, sidewalk parks, parking lots and other places, stone surface processing methods are divided into water grinding surface, fire surface, polished surface, sandblasting, natural surface, matte surface, axe chop surface, lychee surface, pineapple surface, etc.

Hello, dear, the red clay cleaning method on the stone of the fire surface is as follows:

1. Dilute hydrochloric acid or dilute sulfuric acid is used to clean the red clay on the burnt surface stone, which can also be absorbed with a paper towel, 2. After that, an absorbent such as white powder in the Taicha Hall can be sprinkled in the laterite area and placed for 1 to 2 hours, 3. Then wipe with a wet rag, and finally dry the red clay on the fire surface stone.

Burning late surface stone is widely used in subways, airports, squares, exterior wall dry hanging, sidewalk parks, parking lots and other places, stone surface processing methods are divided into water grinding surface, fire burnt bridge surface, polished surface, sandblasting, natural surface, matte surface, axe chop surface, lychee surface, pineapple surface and so on.

Dear, hello, I am happy to serve you, the answer is as follows: The fire stone is mainly heated at high temperature until the crystal bursts, and the surface is rough, and it is recommended to use a professional fire stone cleaner to clean. The detergent can be used in the stained area, and the non-stained can be alkalized with hot water, and the effect is similar. Then use a soft brush to remove stains, and choose a soft brush to avoid scratching the tabletop.

After the stains are brushed off, rinse with clean water, there will be a lot of water stains on the table, do not wipe it with a cloth, use a dry cloth to absorb the water, so as to avoid damaging the rag, the surface of the burnt stone table is uneven, and the cloth will be scratched. If there are scratches on the tabletop, you can apply some toothpaste to the scratches and wipe them with your fingers and a soft cloth. As a very high-grade stone, flint stone has entered thousands of restaurants, and its natural texture, hard material, acid resistance, alkali resistance, high temperature resistance and other characteristics are loved by more and more customers.

Due to the conditions of the flint stone process, natural stone must first have a strong hardness, and the sand content is very low before it can be used as a flint stone material, otherwise it will produce traces on the surface one by one when firing. In view of this, the following will focus on several common and uncommon fire-loose eggplant burnt stone materials on the market. I hope to give some tips to customers who are preparing to buy a similar table.

Finally, I wish everyone can buy qualified products, crack down on profiteers, and eliminate counterfeit and shoddy products.