How can the Roewe i6 have a pimple sound when driving uneven road tires?

Updated on Car 2024-08-10
17 answers
  1. Anonymous users2024-02-15

    Roewe i6 has the sound of pimples when driving uneven road tires, it is recommended to check the chassis of the car, whether there are parts or screws loose caused by abnormal noise.

  2. Anonymous users2024-02-14

    The suspension system has failed and needs to be repaired in a timely manner.

    First, check the level of the vehicle on the road when it is stationary to see if it is on the same plane.

    Secondly, check the suspension system, whether the lower cantilever rubber sleeve is damaged, especially the quality of the shock absorber.

    Finally, replace the parts of the suspension system, and when replacing, it is recommended to replace the original parts.

  3. Anonymous users2024-02-13

    Hello, is it a regular sound, it may be stuck with a stone or something else, inside the tire pattern, check it. Thank you.

  4. Anonymous users2024-02-12

    When driving a car, if you are playing the direction or just starting to drive, the main reasons for the abnormal noise in front are the following five aspects: the steering column is not lubricated and the friction is large; Check that the steering power assist oil is low; Check that there is a problem with the gimbal; The chassis suspension balance bar lifting lug rubber sleeve is aging and hardening; The flat bearing is broken. Suggest the correct way to hit the steering wheel:

    1. Avoid turning the steering wheel on the spot, try to play the direction after the vehicle moves, and the direction on the spot can only be used occasionally when the car is lowered in a special environment.

    2. When the vehicle is stopped, the steering wheel should be returned to the center position to avoid the suspension system and tires from bearing the load.

    3. When you need to turn around, try to avoid the steering wheel hitting the dead center.

    The tread on the surface of the tire is used to drain water, and the water on the surface of the tire can be removed in time in rainy days to increase the grip of the tire. If there are small stones on the road, they will get stuck in the tread, causing the tires to lose their ability to drain water, and on rainy days, the braking performance of the vehicle will be reduced, and even the chance of side slippage will be increased.

    Therefore, the impact of small stones on the performance of tires is still quite large, which should attract the attention of drivers.

    If there are small pebbles on the middle of the tread, it will not have a great impact on the performance of the car, but if the card is a glass or a small iron piece with a sharp object, the result will be different. It may puncture the rubber on the outer layer of the tire, and in severe cases, it will also puncture the steel cord layer of the tire, which can be a big trouble, in addition to causing tire leakage, it is also easy to cause a puncture when driving at high speed.

    Therefore, as a driver, you should still develop the habit of checking the tires frequently, and if something is stuck in the tread, you can pick it off.

    In short, if there are too many pebbles, it will affect the braking performance of the vehicle, and there are certain safety hazards, but as long as there is no obsessive-compulsive disorder, we don't need to care too much about this matter, just know such a thing.

  5. Anonymous users2024-02-11

    1.Loosen all the tire nuts to be removed with sleeves.

    2.Put the jack in the corresponding position of the car (the position of different brands of cars is different, you can refer to the instructions with the car), after the tire is off the ground, hit the tire around it with a hammer to loosen it (someone uses a pedal), and then pull the tire out of the bolt.

    3.Insert the replacement tire into the bolt and tighten all the nuts (because the tire is suspended and difficult to tighten, use the sleeve to tighten it tightly). Exit the jack and the tires hit the ground.

    4.Use a special wrench with torque adjustment (tightening force) to adjust to the corresponding torque value (i.e., the force of tightening the nut concealment) according to the instructions in the car manual.

    5.Tighten the nuts diagonally by clock2 (some tires have five nuts, and they are also tightened diagonally, remember not to tighten them in order). The tire change is complete.

    Note: Some people have to use a sleeve because they don't have a special twisting stove and envy the wrench, and the nut is finally tightened by stepping on the sleeve handle with their feet. This method of concealment is not advisable, if the nut is too loose, it will fall off during driving; Pressing too tightly with your foot will break the bolt.

    The torque values specified in the manufacturer's guidelines are the safest.

  6. Anonymous users2024-02-10

    Electrically adjust the angle of the left and right mirrors.

    L stands for the left side mirror, and R stands for the right side mirror.

  7. Anonymous users2024-02-09

    The rearview mirror adjustment knob, on the right side is the headlight height adjustment.

  8. Anonymous users2024-02-08

    Hello, this is the mirror adjustment switch.

  9. Anonymous users2024-02-07

    This is the normal sound, the car unlocks automatically after your car turns off.

    After encountering two stops and turns off, the horn does not stop, and then press and hold the start button before stopping. After several tests, it was confirmed that the fault phenomenon was as follows: the horn will sound wildly when the steering wheel is not in the center, and it will not sound when the direction is in the center. I don't know if yours is the same.

  10. Anonymous users2024-02-06

    Hello: This is the sound of the car muffler's hot expansion and contraction, the vehicle has this sound, it's okay.

  11. Anonymous users2024-02-05

    The minimum ground clearance is 114, and the uneven road surface should be driven slowly, and attention should be paid to avoiding the raised part.

  12. Anonymous users2024-02-04

    Hello, you can go, but slowly.

  13. Anonymous users2024-02-03

    Roewe i6 is a new car, compact and wide, the main Internet concept is infiltrated Tanliang, the wind resistance is very small, and the fuel consumption should not be high! However, the technical maturity and quality stability of the new car have yet to be tested by the market! The new Civic has advanced technology, stable quality and exquisite workmanship, but the calcium valve water of Changding Baibai is slightly higher, and the delivery cycle is slightly longer!

    I recommend the Civic.

  14. Anonymous users2024-02-02

    It should be possible to find a local large repair shop or 4S shop. In order to ensure the quality and after-sales problems, be sure.

    Find a regular shop for maintenance.

  15. Anonymous users2024-02-01

    The buzzing of the vehicle headlights after replacing the LED is likely to be due to the fact that the headlights are not installed properly, and may be due to the necessary gaps between the headlights.

    In addition, the sound of the headlights may also be due to the sound caused by the work of the cooling fan, some LED lights are equipped with a cooling fan at the bottom, limited to space, the volume of the fan can not be too large, in order to achieve a good heat dissipation effect, the speed of the cooling fan is very high, the high speed of the small fan blade, the noise will be larger, of course there will be a buzzing sound in the process of driving the vehicle.

    If the sound of the headlights is too loud, it is recommended to open the engine cover of the vehicle to check which headlight the sound is in, which is likely to be caused by the failure of the cooling fan.

    Compared with halogen headlights, the brightness of LED lamps is very high, and the power consumption is also quite low compared to the same period last year, and it is also a very normal phenomenon to heat up in the case of work, it is worth mentioning that the LED chip can not work normally in a high temperature state, if the heat dissipation is poor, the LED chip is very fast, then it will burn out, of course, if the vehicle uses a high-power LED bulb, it basically needs a special cooling fan to do a good job of heat dissipation. Hope.

  16. Anonymous users2024-01-31

    The Roewe i6 manual luxury model personally thinks that the car is cost-effective, but the number of models is small, and the convenience of maintenance and car value retention are not very advantageous.

  17. Anonymous users2024-01-30

    Fuel consumption is mainly directly related to personal driving habits and road conditions, and there will be a big gap between the fuel consumption of the same car running at high speed and running in urban areas.

Related questions
11 answers2024-08-10

The Roewe i6 is a new compact model under the Roewe brand, and this car is a good choice among domestic models in this price range in all respects (exterior, interior, powertrain). >>>More

11 answers2024-08-10

It is a SAIC-GM blue-core engine.

13 answers2024-08-10

Pros:I started to pay attention to him before it was listed, and I felt that the Roewe i6 was the most suitable car for me. >>>More

26 answers2024-08-10

Roewe i6 car steering wheel, generally speaking, it is normal to have a little abnormal noise in the direction of the place, it is recommended to play the steering wheel when driving slightly.

5 answers2024-08-10

The Master Edition of the Roewe 750i is actually not as good as the regular 750....Value for money is not proportional at all. Beg.