How to pack a sofa and what are the steps.

One layer of film, one layer of inner liner, one layer of outer packaging.

1. Draw a sketch of the design of the sofa outsourcing on paper, the main components include: base, cushion, backrest.

2. The backrest of the sofa has an arc, which cannot be measured directly and needs to be proofed.

3. Draw a picture of the sofa outsourcing, and the shaded parts in the following picture need to be proofed.

4. Use a ruler to measure the widest (red) and narrowest (blue) dimensions of each face.

5. The backrest is a whole piece of fabric turned over, so you need to use a soft ruler to measure the circumference size.

6. The base is a rectangular combination with edges and corners, and the size can be measured directly.

7. The position of the zigzag line in the figure below is the position of the zipper of the sofa outer.

8. The sofa backrest is curved, which cannot be simply measured, and proofing is also required.

9. For the schematic diagram of the back of the sofa backrest, two holes should be reserved for the bolt of the backrest and the base combination.

10. According to the measured size, cut the fabric with scissors.

11. In the arc fill, wrap the fabric on the surface of the sofa and make proofs.

12. Install the newly made sofa cover on the pedestal.

13. Pay attention to the positioning and size of the bolt position.

14. Put the finished outer fabric on the backrest.

15. Assemble the wrapped components.

16. The effect of fabric sofa outsourcing is as follows.

One layer of film, one layer of inner liner, one layer of outer packaging.

Summary. Hello dear <>

It can be written like this: Sofa Introduction: We provide a variety of exquisite and comfortable, light and elegant, fashionable and beautiful sofas.

Each product has been carefully checked, from materials to design, production, installation to the final official launch, the details are carefully checked to ensure that each product has excellent quality, creating a safe, comfortable and comfortable home environment for you. Our sofas are not only beautiful, but also the perfect way to make your home. <>

Open**, how to pack the sofa briefly.

Hello, I am a factory direct sofa, I want to open a **, but how to write my profile? Teachers help.

Hello dear <>

It can be written like this: Sofa Harusuke Kanno: We provide a variety of exquisite and comfortable, light and elegant, fashionable and beautiful sofas.

Each product has been carefully checked, from materials to design, production, installation to the final official launch, the details are carefully checked to ensure that each rock disturbance product has excellent quality, to create a safe, comfortable and comfortable home environment for you. Our sofas are not only beautiful, but also the perfect addition to your home. <>

Dear, is there anything else you don't understand? You can also tell us more about your situation, and I will answer for you. <>

Teacher, can you provide a second plan?

Our carefully made sofa is made of bushes, with exquisite design, excellent quality, affordable ** to bring you the ultimate comfort. Every piece of our sofa has gone through the whole process of checking, from material feeding to delivery, so that you can buy with confidence! We have a variety of sofas to meet your needs for different styles, from simple to retro, from Sakura light luxury to luxury, we have the sofa you want!

After a professional factory and the whole process of checking, so that you do not have to worry about quality problems!

Kiss, refer to these two.

1. First of all, before punching the punching bag, the first and most important thing is to warm up.

2. When warming up, you should do a special warm-up on the waist, back, and wrists.

3. The next step is to hit the sandbag, in the first few minutes of the fight the range of action should be small, first use the arm amplitude is large, the body twist amplitude is small to play.

4. When playing sandbags, the hands are slightly clenched, remember, do not hold too tightly, which can easily lead to muscle tension, and do not loosen, which can easily lead to joint damage.

5. After the body does not collapse and the body gradually heats up and sweats, at this time, pay attention to adjusting the posture, increase the swing amplitude of the body, pay attention to the waist and back to start exerting force, and reduce the force of the arms. Pay attention to the force of the leg to push the ground, and transform it into the force of swinging forward. Practice this for 3 sets, each with an appropriate amount according to the individual's situation.

6. After the previous practice is almost complete, start to enter the sprint stage, that is, start practicing explosiveness. Generally, try your best to hit the sandbag, without stopping, until you are exhausted, then stop, rest for 5 minutes, sprint again, and repeat a few sets.

7. At the end of the day, stretch the muscles that have just been tense, which can reduce the muscle pain the next day.

Extended Information: How to avoid injury when you start with a sandbag.

1. Master the basics of boxing.

Beginners should have a basic grasp of various boxing movements before practicing hitting sandbags. In the process of hitting the sandbag, constantly improve the technical movements, otherwise it is easy to form wrong movements and it is difficult to correct.

2. Be well prepared.

Before the exercise, you must fully prepare for the activity, especially the fingers, wrists, shoulders, elbow joints, and waist, in order to prevent injury, and it is not advisable to do it with bare hands when hitting. When hitting the sandbag, it is best to do 2 or 3 sets of air strikes before doing the hitting practice.

3. Keep your body tense.

At the moment of hitting the sandbag, the fists should be clenched and the wrist joints tense. The wrist joint is slightly buckled to keep the fist in a straight line with the ulna to prevent injury. This is especially important.

When practicing knees, elbows and legs, the main thing is to master the technical movements and maintain the balance of the body, rather than practicing the exercises. Therefore, do not push too hard to avoid injury.

4. Concentrate.

When hitting the sandbag, you should concentrate your mind, have a concept of actual combat, and assume your opponent to cultivate a sense of actual combat. When practicing boxing, hit the sandbag head-on with the fist, and focus on the hitting part when punching, so that the punch is fast, accurate and powerful, at this time, the sound of hitting the sandbag is crisp, short, and the sandbag is vertically trembling, otherwise the punching force is unreasonable, and it is important to avoid pushing when punching.

The size of the tissue bag or box that you habitually buy may be slightly different, the size can be determined in this way, the following fabric is the top of the tissue box on both sides, the size of the length is the size of the tissue bag +, and the width of the cloth is (the width of the tissue bag size +

The surface cloth and the lining cloth should be hardly lined oh. The order is table cloth, lining cloth, hard lining, and the table cloth is opposite to the lining cloth.

Sew a circle and leave a return.

The stiff lining is cut off by the suture to remove the excess.

For the four corners, I do a 45° angle treatment.

Turn back to the front, and both pieces are done like this.

The following is the production of the front and back pieces of the sofa, the length and height, both of which are relative positions of the tissue bag +

The fabric at both ends of the sofa is also the height of the tissue bag +

Fabrication of the red strip part.

Fold in half and then in half, then stitch a thread.

The position of the back of the sofa is made into such a flower arc, and the red strip just made is to be sewn on the flower arc position of the backrest. Sandwich the strip between two pieces of fabric, fix it with a bead needle, and then sew it into a circle along the edge of the distance to leave a return mouth.

Oh, if you turn to the front, that's it, stuff pearl cotton, and then on both sides, according to the width of the sofa, do the position of the armrests on both sides.

Fold the sides, that's it, suture the return.

Take out the top two pieces of fabric of the tissue box and sew the position of the return.

After alignment, make an opening that is longer than the length of the tissue bag + 1cm, and sew both ends together.

The top of the tissue box is sewn together with the front and back pieces.

Then connect the left and right pieces on both sides of the back piece.

These 5 sides are folded into the shape of a box, and the left and right sides should also be symmetrically sewn on the front piece.

And that's what it looks like.

This is the production of two cushions on the sofa, a square made of red fabric, remember to leave a seam, and leave a return when sewing.

The four corners are treated at a 45° angle.

Similarly, make a cushion of floral cloth, and then sew the back of the sofa on the back of the tissue box, and sew two elastic ropes symmetrically at the bottom of the box, or use Velcro to support the bottom of the tissue bag, so that the production of this sofa tissue box is completed.

Make a mini beach sofa out of a cardboard box.