How do you drain water from a washing machine? How to drain water in the washing machine

Press the "Power" button first; Then find "Dehydration" in the "Program" column, and when the "Dehydration" program lights up, press the "Start Pause" button to drain water; After the drainage work is completed, the washing machine will automatically stop working; Finally, press the "Power" button and turn off the power.

Manually drain the water with a drain pipe.

There may be several reasons why a fully automatic washing machine does not drain water:

First, check whether the nut of the adjusting rod on the drain valve is loose, and whether the tractor cable is loose from the drain valve, resulting in the retractor being unable to pull the drain valve core apart and causing non-drainage;

There may be debris blocking in the drain valve or the drain hose is bent and deformed;

The gap between the drain rod and the rubber valve becomes larger;

The spring in the drain valve is too long or loses its elasticity;

High-power thyristor open circuit, undrained tractor drive voltage output;

The computer board is damaged;

There are foreign objects in the drain of the inner barrel, such as small pieces of clothing, etc., which are blocked;

The water level switch is damaged, and the detection of the water level is out of order, causing the computer board to not perform the drainage program.

Solutions for the above situations:

If the fixing nut is not loose or the cable is not loosened, the retractor may have been damaged and the drain valve core cannot be opened, and the retractor should be replaced at this time;

If there is debris blockage in the drain valve or the drain hose is bent and deformed, unscrew the drain valve cover first and take out the debris;

As long as the gap between the drain tie rod and the rubber valve is appropriately adjusted;

Just replace the inner spring;

Replace according to the original controllable model and power;

The computer board should be replaced;

Disassemble and stand up the entire lid of the washing machine, twist the screws of the middle drum of the inner bucket, and remove the drum to remove the inner bucket. After the inner barrel is disassembled, remove the foreign body and clean the inner barrel;

Replace the water level switch according to the original model.

There is water in the washing machine, and the way to drain it is as follows:

Method 1: Check the problem of the washing machine first, if it is a pressure switch problem, put the drain pipe low, re-inject the water, and then discharge the water, it can be solved.

Method 2: If it is a drain valve problem, you need to check whether the drain valve can work normally, open the washing machine device, you can see the drain valve, see if it can work normally, if it can work normally, it can be solved.

Method 3: There is also this situation, it may be that the water outlet of the washing machine is lower than the drain outlet, resulting in the water cannot be drained clean, you can find a way to make the washing machine higher, which can basically be solved.

Method 4: If the water outlet of the washing machine is not smooth, it may be that the clutch is stuck or the water outlet is blocked. You can add an appropriate amount of water to the outlet to drain the water, and then shake the drain pipe to see if there is any dirty water flowing out.

If there is, you can dredge it, if not, it may be that the outlet valve is damaged, and you need to find a maintenance or after-sales service department, and call the person in charge or other professional and technical personnel to solve it.

Common faults of washing machines

1. Stop the water inlet before the water inlet is reached.

Reason: This is due to the poor performance of the water pressure switch, resulting in the indoor air pressure not reaching the specified pressure, and the contact will be converted from an open to a closed state, resulting in no water inlet.

Solution: As long as the adjusting screw is screwed in, the pre-compression of the water level control spring can be increased, if the water level control spring itself is not elastic, the control spring should be replaced again; If the cam is worn out on the water pressure switch, the cam needs to be replaced.

2. Poor drainage.

It is very likely that the performance of the water pressure switch is poor, or it is also possible that the pipeline is leaking, resulting in a small pressure, and the water pressure switch contact will act in advance when the water level drops, resulting in unclean drainage.

Solution: Find the location of the air pipe leak and seal it with 401 glue. If the water pressure switch is damaged, replace the water pressure switch.

Take a fully automatic washing machine as an example:

1. Unplug the fully automatic washing machine plug from the socket and turn off the power.

2. Then find the drain panel in the front panel of the fully automatic washing machine and open it.

3. After opening the drain panel, you can see the knob of the drain valve, unscrew it.

4. Finally, after unscrewing the drain valve, the drain can be drained.

AboutHow to put the water out of the washing machineWe can drain water through the washing machine's own dehydration function, and the setting of the machine is also relatively simple, we only need to press the button to drain the water in time.

1) Emptied by dehydration function.

Each has its own methods, but some methods are good and some methods are bad. Want to knowHow to put the water out of the washing machineThen we have to mention that the function of a washing machine is the dehydration function, any washing machine is equipped with a dehydration function, so we can remove all the water in the washing machine through such a simple function.

(2) Set up the machine to drain water.

We can set the function options of the washing machine, and then select the dehydration item to start itHow to put the water out of the washing machineIt won't be a problem, and we'll be able to drain the water out smoothly. This method is the best of all and is the one we recommend everyone to choose.

1. If it is a fully automatic washing machine, first turn off the power and then open the back cover, you can find that there is a solenoid valve in the lower part and a column shaft in the middle, push it hard in the direction of the solenoid valve, you can open the drain valve, and let go after the water is discharged.

2. If it is a semi-automatic washing machine, open the back cover after the power is off, and see a tractor below, which is composed of steel wire and spring, and pull it hard with your hand, and the water will be released.

The steps to drain the water from the washing machine are as follows:

1. Fully automatic can open the back cover after power-off, there is a solenoid valve below and a column shaft in the middle, push it in the direction of the solenoid valve, and open the drain valve;

2. Open the back cover after the semi-automatic power is off, and lift the plastic rope of the back cover upward; Step 3: Open the lid behind the washing machine, open the valve of the drain outlet, and let the water go; 4. When draining normally, the steel wire pulls the part in the red circle to the left.

Press the program button to adjust to dehydration mode or rinse mode, and then press the start button to release the water.

The washing machine has a drain display on it, which can be seen.

How to put the remaining water in the washing machine**If you are using a fully automatic washing machine at home, you don't need to control it manually when you use it, because there is a program control when it is running, and when it comes to a fixed time, it will automatically be dehydrated, that is to say, when it comes to the set dehydration time, the washing machine will automatically switch to the discharge mode; If it is a semi-automatic washing machine, it needs to be manually controlled when dehydrating, just press the drain button, and the water can be drained. 2. What to do if the water in the washing machine can't be put away 1. Check that the washing machine is faulty, if the pressure switch is faulty, you can lower the position of the drain pipe, and then drain the water. If the exhaust valve is faulty, you can open the washing machine unit, find the location of the exhaust valve, and then repair the exhaust valve, or simply replace it with a new exhaust valve.

2. The water in the washing machine cannot be discharged, and it may be because the position of the drain outlet is higher than the water outlet, in this case, the washing machine can be raised to a higher point, so as to solve the problem that the water in the washing machine cannot be discharged.

3. If the washing machine can drain water, but the drainage is not smooth, it is generally because the water outlet is blocked, and the water outlet can be dredged in this case. If you can't solve this problem, you can contact professional maintenance personnel and ask them to come to inspect and repair the washing machine, so that the washing machine can be used normally.