Why does a Registered Safety Engineer not have a practising seal after registration?

It is said that the vast majority of places in the country do not have this Dongdong, and I also went to the place where I registered and asked clearly. In general, the state does not pay enough attention to the registered safety engineer, why do you say so, because the so-called registration seal is to play a role in signing where he needs to sign, and when the state does not pay enough attention, it doesn't matter whether the registered safety engineer signs or not, and the final result is that the registration seal is gradually invalid and no longer issued.

On the issue of practice seals, generally speaking, there should be when the certificate is issued, and if there is a problem, go to the China Safety Engineer Talent Network to take a look!

After obtaining the professional qualification of registered safety engineer, there is no registration, as long as it is not more than five years, it can be registered at any time, and if the initial registration is applied for beyond the specified time, it will be handled according to the overdue initial registration.

1. The level of registered safety engineer is set as: senior, intermediate and junior. The evaluation and management measures for senior registered safety workers to accompany jujube reed dismantlers shall be formulated separately.

The professional categories of registered safety engineers are divided into: coal mine safety, metal and non-metal mine safety, chemical safety, metal smelting safety, construction safety, road transportation safety, and other safety.

2. In order to implement the relevant requirements of the reform of the professional title system and promote the effective connection between the professional title system and the professional qualification system, the "System Provisions" further clarifies that "professional and technical personnel have obtained the professional qualifications of intermediate registered safety engineers and junior registered safety engineers, that is, they are regarded as having the titles of engineers and assistant engineers, and can be used as a condition for applying for a higher professional title."

Registered safety engineers will not expire without registration, but the intermediate safety engineer registration certificate is valid for 5 years, and if there is no registration within 5 years, the type answer needs to continue Bu Xiaohui education before applying for registration.

Even if you have obtained a safety certificate, if you do not register, you are not a registered safety engineer.

According to Article 2 of the Provisions on the Professional Qualification System for Registered Safety Engineers, a registered safety engineer refers to a professional and technical personnel who have obtained the professional qualification certificate of a registered safety engineer through the vocational qualification examination and are engaged in safety production management, safety engineering and technical work or provide professional services for safety production after registration.

In accordance with Article 15 of the Regulations on the Professional Qualification System for Registered Safety Engineers, the State implements a practice registration management system for the professional qualifications of registered safety engineers, and registers them according to professional categories.

Personnel who have obtained the professional qualification certificate of registered safety engineer can only practice in the name of registered safety engineer after registration. Therefore, even if you pass the examination and obtain the professional qualification certificate of the safety engineer, if you do not register, you are not a registered safety engineer at all, and you can only say that there is a certificate of passing the examination of a registered safety engineer.

After passing the examination, the intermediate registered safety engineer will receive the "Vocational Qualification Certificate of the People's Republic of China" issued by the Ministry of Human Resources and Social Security. This certificate is an electronic certificate, which can be queried and ** on the China Vocational Skills Appraisal Network.

1.The certificate has not yet been produced or mailed: it usually takes some time to receive the vocational qualification in electronic or paper form.

2.Problems with exam results: If you fail your exam results or have other problems, you will not be able to obtain the corresponding vocational qualification.

3.Fill in the wrong information: If you fill in the wrong personal information (such as name, ID number, etc.) when registering, you may not be able to receive the professional qualification certificate normally.

It is recommended that you log on to the China Vocational Skills Appraisal Network to check whether you have obtained the corresponding electronic vocational qualification certificate, and confirm whether the personal information you fill in is correct. If you still have questions, you can contact the local labor bureau or relevant agencies for consultation and resolution.

OK. The scope of practice of a Registered Safety Engineer includes:

1) Safety production management;

2) Safety production technology;

3) Investigation of production safety accidents.

and analysis; 4) Safety assessment and evaluation, consultation, demonstration, testing, inspection, education, training and other professional services for safety production.

Intermediate Registered Safety Engineer.

According to the professional category, it can practice in the production and storage of dangerous goods of various scales, as well as mines, metal smelting and other units, and the junior registered safety engineer Changchang.

The scale of practice units shall be formulated by each locality in accordance with the law in light of actual conditions. The categories of registered safety engineers are divided into: coal mine safety, metal and non-metal mine safety, chemical safety, metal smelting safety, building construction safety, road transportation safety, and other safety (excluding fire safety).

Summary. Hello, dear. We're happy to answer your <>

The registered safety engineer practice certificate must be signed by himself. According to the regulations, I need to sign and bear the corresponding legal responsibility.

Do I have to sign the registered safety engineer practice certificate?

Hello, dear, early scum. I'm glad to open up the answer to your <>

The registered safety engineer practice certificate must be signed by himself. According to the regulations, I need to sign and bear the corresponding legal responsibility.

According to the regulations? Is there a basis.

Registered Safety Engineer refers to the professional and technical personnel who have passed the professional qualification examination for registered safety engineers and obtained the "People's Republic of China Registered Safety Engineer Professional Qualification Certificate", and have been registered, with the full name of CertifiedSafety Engineer (CSE) in English.

Is it signed, and is the certificate valid, expressly stated?

According to the provisions of the "Regulations on the Professional Qualification System for Registered Safety Engineers" (Emergency 2019 No. 8), Article 20 stipulates that a registered hail safety engineer shall sign his or her practice achievement document, dig rubber and bear the corresponding responsibilities.

No, if I don't sign it, it means that the certificate is invalid.

Yes.

After passing the registered safety engineer examination, you must register immediately if you do not get a practicing license. Note: The expiration date of the search is 3 years, calculated from the date of registration.

1. Online registration is implemented for the national unified examination of international business document clerks. Registration**: National International Business Document Examination Center, the online registration time is determined separately every year, and the examination qualification confirmation will be carried out at the same time.

Within the specified date, candidates can go to the local examination center designated by the China Association of Foreign Economic Cooperation Enterprises to go through the qualification confirmation procedures, and those who have not completed the qualification confirmation within the time limit cannot take the test. After the candidate's qualification is confirmed, he or she should pay the examination fee, which is 80 yuan for each subject, a total of 160 yuan for the two subjects, and 20 yuan for each subject.

2. The level of registered safety engineer is set to: senior, intermediate and junior. Measures for the evaluation and management of senior registered safety engineers shall be formulated separately.

There are 10,000 people who have obtained the qualification of registered safety engineers in the country, and the 10,000 people who have been registered to practice cannot meet the talent needs of the current enterprise safety management.

After obtaining the professional qualification of registered safety engineer, there is no registration, as long as it is not more than five years, it can be registered at any time, and if the initial registration is applied for beyond the specified time, it will be handled according to the overdue initial registration.

1. Article 18 of the provisions of the professional qualification system for registered safety engineers shall apply for the initial registration of intermediate registered safety engineers, and shall be submitted to the registration preliminary examination agency within 5 years from the date of obtaining the professional qualification certificate of intermediate registered safety engineers.

2. If the registered safety engineer qualification certificate is obtained before the implementation of these provisions and applies for initial registration, it shall be submitted to the registration preliminary examination agency within 5 years from the date of implementation of these provisions. If the initial registration is applied for beyond the prescribed time, it shall be handled as the overdue initial registration. The Ministry of Emergency Management will issue an intermediate registered safety engineer registration certificate (paper or electronic certificate) to the applicant who is approved for registration.

Persons applying for registration must meet the following basic conditions at the same time:

1) Obtain the professional qualification certificate of registered safety engineer;

2) Abide by laws and regulations, and abide by professional ethics;

3) Employed in production and business operation units in production safety management, safety engineering and technical positions or safety production professional service institutions to engage in professional services in production safety;

4) Have full capacity for civil conduct and are not more than 70 years old.

Those who abide by the Constitution, laws and regulations of the People's Republic of China, have good professional quality and moral character, and meet one of the following conditions, can apply to participate in the intermediate registered safety engineer professional qualification examination:

1) Have a college degree in safety engineering and related majors, and have been engaged in safety production business for 5 years; Or have a college degree in other majors, and have been engaged in safety production business for 7 years.

2) Have a bachelor's degree in safety engineering and related majors, and have been engaged in safety production business for at least 3 years; or have a bachelor's degree in other majors, and have been engaged in safety production business for at least 5 years.

3) Have a second bachelor's degree in safety engineering and related majors, and have been engaged in safety production business for at least 2 years; or have a second bachelor's degree in other majors, and have been engaged in safety production business for at least 3 years.

4) Have a master's degree in safety engineering and related majors, and have been engaged in safety production business for at least 1 year; or have a master's degree in other majors, and have been engaged in safety production business for at least 2 years.

5) Have a doctorate degree and have been engaged in safety production business for at least 1 year.

6) After obtaining the professional qualification of junior registered safety engineer, he has been engaged in safety production business for 3 years.

Registered safety engineer professional qualification certificate generally has a registration location, you can take a look at it in detail, it doesn't matter if the time passes, generally (2-3 months), you can check your local registration place on the Internet, explain your situation, you can also go to register,