How to adjust OPPO R7 when it enters the recovery interface?

oppor7 to enter the recovery interface to adjust the method:

1. The most common method:

First of all, turn off the OPPO R7,After shutting down,We press and hold the right side of the fuselage at the same time"Volume down button"+"Power button",When we see the OPPO R7 after the boot logo appears,We release the power button first,Press and hold"Volume button"Don't release it first,After waiting for a few seconds,You can enter the recovery mode of OPPO R7。

2. Enter the recovery mode of OPPO R7 with the help of some tools.

If you don't want to shut down and restart the phone, and then enter the recovery mode, you can also use some tools to achieve it, we can use some mobile phone management software, such as flashing wizard, Master Zhuo, Tencent mobile phone manager and other software, you can also find relevant operation options in its tools, what we need to do is to connect the mobile phone to the computer, and then enter the tool to operate, as shown in the figure below:

About OPPO R7How to enter the recovery method is all introduced here today,In fact, it is very simple to enter the recovery mode,The most commonly used is to shut down and then press and hold the right side of the fuselage at the same time"Volume down button"+"Power button。

Here's how to fix it:

a.Press and hold the volume up button and the power on button, the option will appear (on some models you press and hold the volume up and down at the same time), if that fails, try pressing another button such as the home button, or touch the screen area, such as some Moto models.

b.Use the volume up and down keys to select Reboot System Now, Power button or Menu Home button to confirm, and the phone will automatically restart.

Recovery mode is an advanced mode unique to Android phones, which may be used in many times, the most common is to flash the phone, and often need to enter the recovery mode. Some low-level operations cannot be performed in the normal boot state, just like the system disk (C drive) cannot be formatted when Windows is booted, then you need to enter a temporary system to perform these operations, and this"Temporary systems"This is what we call Recovery, which is similar to a DOS or PE system before Windows boots. When you buy a brand new Android phone, you already have Recovery, but the official Recovery is usually not able to flash and other operations except for clearing user data, so you need to flash a third-party recovery in advance.

If you are using an OPPO OnePlus phone, you can refer to the following operation method of Shuangqing (Recovery to reset the phone), come and take a look

If the mobile phone has been locked by the "Find Mobile Phone" function after the operation, you need to enter the password of the corresponding mobile phone account to activate the mobile phone (the mobile phone is in the network state), if you forget the mobile phone account password, click "Forgot Password" on the login page, and reset your account password after verification; If you can't reset your password through the binding information, you can select Account Appeal. If you can't find it, you need to bring the relevant purchase voucher to the OPPO official service center for processing.

ColorOS version.

Operation steps: 1. Press and hold the power button and the volume down button at the same time for 5 seconds to enter recovery mode.

2. Select "Chinese Simplified" and click "Format" to reset your phone.

Note: OPPO A93 5G model operation steps: Press and hold the power button + volume down button for 5 seconds at the same time in the shutdown state to enter recovery mode (recovery), select "Chinese Simplified" and click "Format" to reset the phone.

ColorOS version.

Steps: 1. Press and hold the power button + volume down button for 5 seconds at the same time in the shutdown state to enter recovery mode.

2. Select "Chinese Simplified" (enter the verification code prompted on the interface) > click "Format Data Partition" > click "Format" to reset your phone.

Clear the options under the Data interface.

1. Option "Clear Data" to keep contacts, information, **, you need to enter the lock screen password, you can't reset the phone if you forget the lock screen password.

2. The option "Format Data Partition" allows you to reset your phone without a lock screen password, but you can't keep the data.

ColorOS 13 and above.

Steps: 1. Press and hold the power button + volume down button for 5 seconds at the same time in the shutdown state to enter recovery mode.

2. Select "Chinese Simplified", click "Format Data Partition", > click "Format" to reset your phone.

1.Open your phone's settings;

2.Find the other settings;

3.Tap Restore Phone;

4.Click Erase All Content and Settings;

5.This is a page that will pop up at the bottom, we click on Erase Data, the phone will restart, and after the reboot, you can restore the factory settings.

Data expansion: OPPO R7 is a new smartphone launched by OPPO in 2015, which is another embodiment of the slim design and beautiful appearance of the R series products after the OPPO R5. The main all-metal body, photography and flash charging, known as the "all-metal flash shooting weapon", was officially released on May 20, 2015 at Beijing Aoya Convention and Exhibition Center.

1.Global flash shot system.

Extremely fast start in seconds, the fastest phase focusing in seconds, and with the exclusive preferred anti-shake algorithm, this "two fast and one stable" constitutes a "global flash shooting" system. Fast, accurate, and stable imaging makes it easy to capture fleeting images. It consists of three parts:

Phase focus, fast start, and preferably stabilization.

Stabilization is preferred. Using the principle of CMOS sensor in real time, a large amount of image data before and after pressing the shutter is stored in the cache, and when the user presses the shutter, the clearest image is found from the cache through calculation, not necessarily the one when the user presses the shutter. Of course, from the naked eye, it is the user who presses the shutter.

Just try to choose the sharpest one, if the user is in a state of jitter or the hand has a large amount of jitter, preferably stabilization will have no effect.

1. The most common way to enter recovery mode.

First of all, turn off the OPPO R7,After shutting down,We press and hold the right side of the fuselage at the same time"Volume down button"+"Power button",When we see the OPPO R7 after the boot logo appears,We release the power button first,Press and hold"Volume key"Don't let go first,Wait a few seconds,You can enter the recovery mode of OPPO R7。

2,With the help of some tools to enter the recovery mode of OPPO R7, the methods of how to enter OPPO R7 are all introduced here today,In fact, it is very simple to enter recovery mode,The most commonly used is to shut down and then press and hold the right side of the fuselage at the same time"Volume down button"+"Power button"。

Hello, in the case of power off, press and hold the power button and the volume down button at the same time to vibrate (about 6 seconds) to enter REC mode.

1. For colorOS version, click "Restart the phone immediately", or press and hold the power button to turn off the phone, and then turn it on;

2. For non-coloros versions, move the cursor to the shutdown or restart item through the volume button, or directly click the shutdown and restart, and click the power button to confirm; If the screen is Select Installation Package. and so on, please move the cursor to. Click OK to return to the Restart and Shutdown page, and you can stop or restart.

Introduction: Recovery mode is a boot system that is used to perform certain operations that do not work in the normal boot state (such as installing a new ROM package, hard formatting the phone, etc.). You can press and hold the power button and the volume down button at the same time to enter the recovery mode when the phone is turned off, and after entering the recovery mode, you can clean the cache, clear the data, and reinstall the system.

Function: You can flash or back up your phone's Android system through this recovery mode interface, because the recovery version is updated quickly, the old version only has three options, so it cannot back up the system, and it can only enter the system upgrade through a file called a file.

The method of oppoa57 to enter recovery mode is as follows:

Secondly, in the recovery interface, and select the corresponding factory reset interface, and finally click"Applications", the system will automatically configure, and the configuration can be done after the configuration is successful.

Press the power button and volume down at the same time.