If you use a ton of boiler for fuel, how much does natural gas save compared to diesel?

The ** of oil-fired steam boilers is about tens of thousands of yuan per unit, the cheap ones are one or two thousand yuan, and the expensive ones are one or two hundred thousand yuan. The ** of oil-fired steam boilers is affected by many aspects, such as brand, category, specification, market, etc. Before choosing to buy, it is necessary to understand and compare in many aspects.

An oil-fired steam boiler is a steam boiler that is fueled by an oil, such as diesel. It is divided into vertical oil-fired steam boilers and horizontal oil-fired steam boilers. If you want to know more about oil-fired steam boilers, you can consult Guangzhou Born Energy****, thank you!

Hello! Press: The calorific value of 1 kg of diesel is 10200kcal, and the fuel consumption of 1 ton of boiler is about 8500kcal of cubic natural gas

Gas consumption is about 75 cubic meters. This can be calculated based on the local market for diesel and natural gas**. Don't say it won't count!

When in doubt, please ask.

Then you can be very simple is the algorithm, one side of natural gas is about equal to one kilogram of diesel, then you look at how much weather you have there**, how much diesel**, a ton of boiler needs about 75 cubic meters of natural gas to run at full load for an hour, and diesel is almost 75 kilograms, and you can calculate the rest.

Normally,1

Tons of steam boiler 1 hour with 80 cubic meters of natural gas, 66kg of diesel, natural gas **2 yuan cubic meters, diesel ** yuan kg, under normal circumstances, 1 hour can save yuan. This has to do with energy everywhere**.

The management fee for fuel oil and gas boiler is basically the same, and the difference is in the BAI fuel cost.

How about industrial boilers.

du selection has been introduced in zhi:

The gas fee is a multiple of 1:2 DAO relationship, that is, if the gas is 1, then the fuel is 2.

Take a 1-ton boiler as an example:

Fuel: Diesel Fuel consumption: 80 liters h Fuel cost = 80 oil price yuan liter = *** yuan h

Fuel: Natural gas Fuel consumption: 80 cubic meters h cost = 80 gas price yuan cubic meters = *** yuan h

Both boilers are of the same design, the gas burner is higher, and the difference in fuel is clear at a glance.

It takes 71 N3 of natural gas and 63 Nm3 of diesel to produce one steam per hour. You can calculate the exact amount yourself.

You give the manufacturer and model of the boiler, you can find out, the amount of steam used per ton and then multiplied by the unit price, generally speaking, the consumption of 10 tons of boiler is as follows:

Heavy oil: 600kg h yuan kg power consumption 55kw

Natural gas: 706nm3 h yuan nm3 power consumption 29kw light diesel: 586kg h yuan kg power consumption 29kw biomass:

2000kg h 1 yuan kg power consumption 46kw

Then it can be calculated that the cost per ton of steam is approximately.

Heavy Oil: Yuan.

Natural Gas: Yuan.

Light diesel: yuan.

Biomass: Meta.

The error is around 15%.

The calculation of the cost is related to your procurement cost, which cannot be calculated, and can give you the answer: the cost ranking heavy oil "natural gas" diesel oil.

This cost is related to the structure of your furnace, and the level of thermal efficiency conversion determines the cost. Biomass is an emerging thing, and the convenience of procurement should be considered, heavy oil has a smell, and natural gas needs to be matched with pressure vessels. Diesel is the easiest, but now **high.

There is no one who is good or bad, it is up to you to choose.

The coal-fired furnace has a coal meter, and the results can be calculated according to the tonnage conversion of the comparison table. A larger boiler instrument panel has.

Hello dear, oil-fired boilers, oil-fired boilers have light diesel, heavy oil and methanol, etc., these three types of oil are used in boilers, but enterprises need to purchase fuel in real time, including transportation costs, storage, fire protection, etc. Gas boilers, such as natural gas, natural gas only need to lay pipelines to achieve real-time supply of spine gas, which can save labor, transportation and other costs. Although gas boilers have advantages from the above two points, the actual use of boilers is greatly affected by regional requirements, such as remote areas without natural gas pipelines, production enterprises use boiler fuel intelligent selection of oil or biomass.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

Natural gas boilers are more cost-effective than diesel boilers, and the operating cost is 2-3 times that of natural gas lead.

Advantages of gas boilers::

1. Clean and environmentally friendly, the gas boiler burns natural gas and heats the water in the boiler body, while natural gas is clean energy and will not cause air pollution to the environment.

2. Time-saving and labor-saving, compared with the traditional coal-fired boiler, the gas boiler gets rid of the way of coolie coal, and now the gas boiler adopts fully automatic combustion, and the operation is carried out by the computer control cabinet.

4. High thermal efficiency, short working time and high efficiency of gas boiler, saving economic costs on the side.

5. The area is small, the volume of the gas boiler is relatively small, and the corresponding auxiliary equipment is not very much.

6. Compared with coal-fired boilers, gas boilers have less auxiliary equipment, less staff, and much less wages and welfare costs. Huai Qi.

7. Save the cost of electricity for boiler production. The gas boiler has less fuel transportation and other auxiliary equipment, small power and short continuous operation time, so the power consumption is low and the cost is relatively low.

8. Reduce labor intensity. Coal-fired boilers require high-intensity physical labor in the process of coal transportation and slag removal, while gas-fired boiler workers have less labor intensity.

Cons: Ashika.

1. It is very high, because the oil-gas dual-fuel burner is very expensive, so the overall boiler is high.

2. There are no smaller models of oil-gas dual-fuel burners, only the above models.

3. The amount of gas consumed is large, and it is easy to overheat when the water pressure is insufficient, and it is not suitable for use in cold areas with strong winds. <>

Kiss, hello in front of your hands. Generally speaking, the cost of using a 20-ton gas boiler is higher than that of two 10-ton gas boilers, because the fuel consumption of a 20-ton gas boiler is greater than that of two 10-ton gas boilers, and the starting power and fuel consumption of a 20-ton gas boiler are larger than that of a 10-ton one, so the gas cost used for start-up and operation is also higher. And the maintenance cost of a 20-ton gas boiler is also higher than that of two 10-ton gas boilers.

In general, the fuel cost of a gas boiler is lower than that of an oil-fired boiler because the gas is relatively low and the exhaust gas produced after combustion is cleaner than that of oil oil. If you have a choice, buying a gas boiler may be more affordable. However, it should be noted that the amount of boiler used, efficiency, etc. will also have an impact on the cost, so the specific situation needs to be analyzed according to the actual situation.

Is there much biofuel with that sawdust?

Not much. Why.

The pellet made from sawdust.

Wood pellet fuel costs don't have to be much lower than natural gas.

1000 pieces a ton.

In addition, the ash produced after the wood pellet fuel is burned.

On the other hand, natural gas is a renewable energy source, which is stable in combustion and non-toxic and harmless after combustion.

It's not reliable to make sawdust fuel.

It's not unreliable, no matter how good wood pellet fuel is, it can't compare to natural gas.

Natural gas has a certain development trend, and wood pellet fuel is only converted from firewood heating, and it has never been able to achieve the role of natural gas.

The cost of wood pellets is relatively low, 1000 yuan a ton.

**As you know, generally only the industry will be forced to choose wood pellet fuel.

Unless you are using it for industry, it is not recommended to use wood pellet fuel.

Used in industry, wood pellet fuel can replace coal.

Summary. The boiler has the lowest cost of burning natural gas. 1. Most rural areas in the north rely on combustion boilers for winter.

Due to the large amount of coal this year, many people are ditching coal in search of other fuels. Let's start with fuel**. If natural gas is 3 yuan per cubic meter and base fuel is 3 yuan per kilogram, then alcohol-based fuel boilers will not save as much money as natural gas boilers.

The boiler has the lowest cost of burning natural gas. 1. Most rural areas in the north rely on combustion boilers for winter. Due to the large number of coal start-ups this year, many people have abandoned coal balances in search of other fuels.

Let's start with fuel**. If natural gas is 3 yuan per cubic meter and basic fuel is 3 yuan per kilogram, then the alcohol-based fuel boiler will not save as much money as the natural gas barrier boiler.

There are 6 types of pro-boiler fuels, namely: natural gas, oil, coal, electricity, biomass oil, and diesel.

Coal storage cavity in the severe pollution situation, biomass steam boiler its flue gas also contains a lot of smoke and dust particles, to the ecological environment to say that it is still not friendly, natural gas steam shouting boiler, after incineration also only a small amount of water and carbon dioxide, attributed to clean and environmentally friendly forward equipment.

In terms of environmentally friendly transportation, natural gas has more advantages.

Natural gas has a high calorific value, high combustion efficiency, does not produce pollutants, and is more stable than other commonly used fuels such as coal and oil. At the same time, there are other advantages and disadvantages of using natural gas, such as stability, easy operation, etc.

The boiler has the lowest cost of burning natural gas. Most of the rural areas in the north rely on the burning of boilers to survive the winter. Due to the sharp rise in coal this year, many people have given up coal to find other burning materials.

Let's start with fuel**. If natural gas is 3 yuan per cubic meter and base fuel is 3 yuan per kilogram, then alcohol-based fuel boilers will not save as much money as natural gas boilers.

From the aspect of environmental protection transportation, Tianlunyou gas has more advantages: coal has a severe pollution situation, biomass steam boiler its flue gas also contains many smoke and dust particles, which is still not friendly to the ecological environment, natural gas steam boiler, after incineration, only a small amount of water and carbon dioxide occur, attributed to clean and environmentally friendly forward equipment.

As oil prices rise, more and more brands have begun to launch CNG models, that is, compressed natural gas models. As the name suggests, compressed natural gas is used as the combustion medium to generate power. In many cities, taxis are basically all burning natural gas, but later changed from burning gasoline to burning natural gas.

So here involves a modification problem, many private car owners also want to change to burn natural gas, the current Baoding area of the modification cost of 3000-5000 yuan per vehicle, provided that there is no certificate. If you want a certificate, then the cost is about 2000.

Let's start with an account. Take Baoding taxi as an example: after the modification of the natural gas pipe capacity of 80L, in summer can run 120km with air conditioning, then the cost of 80L natural gas is 30-40 yuan, if you burn gasoline then 120km to consume 9L of oil, the cost is about 70 yuan, that is to say, burning natural gas is half of the cost than burning gasoline.

Considering the high summer temperatures, the density of natural gas is low. If it is autumn and winter, there is no problem with running 200km on 80L of natural gas. <>

Through the calculations, we can clearly understand the benefit of natural gas, that is, the cost of use is much lower than the cost of traditional gasoline engines! But there are pros and cons to everything, and there are the following risks associated with retrofitting natural gas:

If there is no formal modification certificate and modification procedures, then once the traffic police check the car, there is no doubt that it will be detained.

There are strong geographical restrictions.

Although it can be used for both oil and gas after modification, the combustion point and octane number content of natural gas and gasoline are different, and the ignition time is also different, so after changing to natural gas, gasoline will not be burned again, because after the modification of natural gas, the ignition time of the engine will be adjusted to adapt to the physical characteristics of natural gas, and then burning gasoline will lead to a series of problems such as carbon deposition and fuel consumption.

The large size of the gas tank will take up a lot of space in the trunk.

The power of natural gas is far less than that of traditional gasoline engines, and natural gas models or modified natural gas models will be 20%-30% lower than traditional vehicles in terms of power.

As for the safety issues that everyone is generally concerned about, Xiaochuan feels that as long as it is a natural gas model of a regular manufacturer or a place that is recognized by the state as a qualified natural gas model, its safety will not be lower than that of a traditional vehicle. Although the car carries a gas tank, but the gas tank is a protective device, once the temperature and internal pressure exceed the warning value, it will automatically release the pressure, combined with the application of natural gas in the automotive field, there has not been a single safety accident.

Natural gas is higher than coal gas. The calorific value of natural gas is twice that of coal gas, and it varies from region to region. For example, the natural gas in Shanghai is one yuan, and the gas is just half of the natural gas.