What are the materials used to build the main structure of the exhibition?

Generally, the main structure of the exhibition is divided into the following types.

1. Timber structure; This structure is mainly composed of 9 of the keel, each 9 cleats are 1200x2400mm, each board can be made into about 1 square wall, that is, half of the panel, half of the keel. Other structures may be made of sheet nailing. When the wall needs to be load-bearing, 12 centi-board is required, which can make the screw hard.

If the surface needs to be painted or spray painted, you need to use woodworking boards, and first batch putty powder on the surface, and then make baking paint, but pay attention to operating in a dust-free space.

The surface of the wood structure is divided into Boeing soft sheet, fireproof board, latex paint, spray paint, and baking paint effect. Its strength lies in the diversity of its structure and its strong integrity. The disadvantage is waste, which is not conducive to environmental protection.

2. a truss structure; The advantages of this structure are obvious, simple and low cost. The combination of truss + spray painting is the only way to save money. But the disadvantage is that there is no grade and it looks cheaper.

3. a profile structure; Most of the early profile structures in China were used to make standard booths, with eight barrel columns, flat aluminum, and plates as a combination, and the conventional standard beach was divided into 9 square and 18 square standard booths, providing convenient and affordable ways for small enterprises to participate in the exhibition.

After the 90s, the profiles were diversified, mainly aluminum square columns, this profile structure can make the shape of the booth more diverse, aluminum square columns are divided into 40 80 120 and other models. The advantages are environmental protection, economy and detachability, and the disadvantage is still that the structural combination is limited.

4. Lightweight module; Some structures are more mature in foreign countries, representing Germany, similar to the aluminum square columns we use, but his combination is more flexible and changeable, and can also be combined with cloth and wood structures, which is visually more international, simple and fashionable. However, the acceptance of people in China is not high, and exhibitors have no concept of environmental protection for many years, and they are also accustomed to the heavy feeling of wooden structure, so it is still rare in the exhibition hall. Only multinational companies, European and American exhibitors are more commonly used.

The general main structure, divided into wooden structure, truss structure, profile, surface material is different, the surface of the wood structure is divided into a variety of it, often mail is fireproof board, paint, paint, spray paint, real stone paint, stickers,

The design and construction of the booth at the exhibition is often related to the corporate image of the exhibitor, so what construction materials are needed for the construction of the booth?

First of all, there is "aluminum profile", as the country more and more advocates to improve people's awareness of environmental protection, this material is also more and more used. Its advantage is that it is not only environmentally friendly, but also very economical, can be disassembled, assembled and recycled, and has now become one of the main building materials of the annual large-scale Canton Fair.

In the early days, most of the profiles were used as standard booths, and this material was especially suitable for small booth design and construction, which is the preferred construction material for many small businesses. The only drawback of this is that his structural combination is very limited, and many modeling designs are difficult for it to complete.

The second is the "wood structure", which is also a very common building material, its building materials are diverse, and because it is very integral, the material weight is light, and its structure is not easy to break. And it is very versatile, it can be painted, spray painted, painted with latex paint, and fireproof board on the surface of the wooden structure.

The third is the "lightweight module", which is not only very flexible, but also can give people a sense of international fashion with cloth or wooden structure. However, at present, the domestic construction market has not yet been popularized, and the representative of this mature structure is Germany.

The fourth is the "truss" booth design. This kind of general use is used for simple booth design, and its advantages lie in simple structure and low cost. Usually it will be combined with people and spray painting.

But because this material is too cheap, it is difficult to design high-level design and construction when designing and using. Therefore, it has gradually been passed by many exhibitions.

In the exhibition construction, the choice of materials should be coordinated and determined according to the needs of the company's products and exhibition requirements. Shanghai Yaguan Exhibition Planning ****, with 15 years of professional exhibition planning and construction experience, for friends who have exhibition design and construction needs, free design can be carried out.

Generally speaking, the wooden structure is relatively unusual, and the common ones are wooden keels, protective boards, stickers, etc. Beijing Tongye YTO Exhibition will formulate a plan for you according to your actual needs.

There are many kinds of materials often used in the construction of exhibitions, and today the Bumblebee Exhibition will introduce to you several construction materials that are often used; Uses of sticky notes, chevron boards, KT boards.

Sticky sticky stickers, also known as self-adhesive label materials, are a composite material of paper, film or special material coated with adhesive on the back of the fabric and coated with silicone protective paper as the bottom paper.

Usage: Use the cutting plotter to carve out text, logo, decorative patterns, etc. Use transfer membrane** with board walls, reception desks, etc.

Types: Post-note glossy, matte, translucent, metallic, etc.

Chevrolet board, also known as PVC foam board or Andy board, is chemically composed of polyvinyl chloride.

Features:1Waterproof, flame retardant, acid and alkali resistant, mothproof, light weight, heat preservation, sound insulation, shock absorption.

2.It is processed on the same level as wood, and the processing performance is much better than that of wood.

3.It is an ideal alternative to wood, aluminum, composite panels.

4.The surface of the plate is very smooth, with high hardness, and it is not easy to have scratches.

Specification: 1220x2440mm, thickness 1-25mm.

KT board KT board is a kind of advertising material made of PS particles through foaming to generate a board core, and then pressed together by a surface covering film.

Features: The board body is light, not easy to deteriorate, easy to process, can be printed directly on the board, painted. Low cost.

Specification: 1220x2440mm, thickness: 6mm.

Plexiformat: Plexiglass (acrylic).

PS board, commonly known as organic board, is a thermoplastic amorphous resin, colorless, odorless, tasteless and shiny, light and inexpensive, low water absorption, good colorability, stable chemical properties, excellent electrical insulation, high frequency insulation, has a certain impact resistance, weather resistance and aging resistance, good light transmittance, can resist general chemical corrosion, can be machined, hot bending, silk screen printing, blister.

Plexiglass has a very beautiful appearance, and when polished, it has a crystal-like luster, and is also known as the "plastic crystal queen".

Disadvantages: The hardness is not as good as that of inorganic products such as steel, ceramics, and silica glass. The coefficients of water absorption and thermal expansion are large.

Uses of plexiglass: Plexiglass is widely used in hotels, hotels, gymnasiums, airport terminals, bus shelters, schools, outdoor advertising light boxes, etc.

The general main structure, divided into wooden structure, truss structure, profile, surface material is different, the surface of the wood structure is divided into a variety of it, often mail is fireproof board, paint, paint, spray paint, real stone paint, stickers,

The wood-based panels are lightweight, have high strength, good elasticity, and are easy to process, shape and coat. In the construction of the exhibition, commonly used wood-based panels include plywood, fine Kuchang woodworking board (wood core board), wood veneer, fiberboard, etc. The man-made panels used in the exhibition are painted to repel and color them.

Metal materials include stainless steel, steel plate and aluminum alloy. The metal materials commonly used in the exhibition include steel plates, angle steel, square tubes, round pipes, stainless steel profiles, aluminum-plastic panels, etc. If the booth is designed with a two-story structure, for safety reasons, the angle steel is used to bear the load, even if it is supported by a wooden structure, it is also an internal encapsulated angle steel.

Artificial imitation stone, artificial imitation stone has the texture of natural stone, light weight, high strength, corrosion resistance, pollution resistance, convenient construction, and color, variety, shape and other diversity, but the color and texture are not as natural as natural stone, soft, artificial imitation stone materials are often used in exhibitions.

Architectural glass, glass has the functions of light transmission, perspective, sound insulation, heat insulation, etc., good chemical stability, strong acid resistance (except hydrofluoric acid), and the disadvantages are brittleness, poor resistance to quenching and quenching, lye and metal carbonate can dissolve glass, etc. Glass is used for partitions, floors and decorations in the exhibition. Sandblasted glass, frosted glass and sprayed glass have the functions of light transmission and non-perspective, and can be used as partition walls.

Stained glass and stained glass can be used for decoration. Gypsum decorative board, gypsum has the properties of light weight, heat insulation, sound absorption, non-combustible, nailing and sawing, delicate texture, smooth surface, white color, and also has the properties of humidity control and sound insulation. Gypsum board, decorative gypsum board, and gypsum floral decorations can be used to decorate the exhibition.

Plastic material, plastic light weight and high strength, good thermal insulation, good corrosion resistance and decoration, easy to process. The plastic materials commonly used in the exhibition are PVCSunshine boards, light box sheets, etc.