How to do it well? Learn how to dump the car well

Updated on Car 2024-08-08
14 answers
  1. Anonymous users2024-02-15

    1. Learn to adjust the seat and mirrors.

    1. Seat adjustment.

    Seat according to personal height, after parking the car, the lower edge of the left rearview mirror is just pressed, completely pressed the library line, at this time the body is completely in the library, the body is slightly tilted back, that is, a little more than 90 degrees of angle can be [too large is easy to appear reversing steering wheel late, too small steering wheel is easy to play early], adjust the seat, so that the back just sticks to the seat, the adjusted sign is: out of the warehouse to arrive at the parking position is just left and right, if there is a ruler can be measured, the error of 10cm does not affect the storage (can be).

    2. Adjustment of rearview mirrors.

    Refer to the coach's opinion, according to personal circumstances, as soon as you see the rear tire or door handle, be sure to ask the coach to guide the adjustment.

    2. Control the clutch and quickly hit the steering wheel.

    Control your speed and practice your steering wheel.

    3. Go to the examination room to practice.

    The garage of the test room is slightly different from that of the driving school, and there will basically be a certain degree of change, such as the garage of the test room is actually relatively short, 10-20 cm or even 30 cm shorter, which requires you to brake accurately, the width of the garage is still relatively narrow, the general driving school is 230-235cm, but most of the test room is between 220-225 cm, so it is relatively stable to contact the test room in person.

  2. Anonymous users2024-02-14

    More practice is the best way to do it.

    For the reloading, the control of the clutch and the feel of the car are the key.

    It can strengthen the exercise of clutch control ability and increase the feeling of the car by turning circles in the field or running on the road.

    You can also contact projects such as curve driving first, anyway: practice makes perfect.

  3. Anonymous users2024-02-13

    Find the corresponding point according to your height and sitting position, and you're good to go.

  4. Anonymous users2024-02-12

    Not learning to dump for 10 days is not stupid.

    After all, reversing into the warehouse normally takes about a week to practice, and subject 2 is very focused on the sense of the car, some people will get started quickly, some people will get started slowly, which is not linked to IQ. In this case, it can only be said that the understanding is a little poor, and the slippery does not understand the skills in the library, so there will be no progress in practicing for so many days.

    Reversing warehousing skills

    For the driving test, most of them are test-oriented education, reversing into the garage to remember the coach to help you set the point to play the direction can be, take the right inverted library as an example, the specific skills are as follows:

    1. After entering the reversing and warehousing test area, start chasing the line, keep the distance between the right side of the body and the edge of the storage position, and stop after the shoulder coincides with the control line;

    2. In the process of reversing backwards, observe the lower edge of the left rearview mirror, and hit the full square to the right after overlapping with the start and stop control line;

    3, into the garage to observe the rearview mirror, if the rear wheel of the car from the right corner of the library is about 30 cm, then do not need to correct the direction, continue to reverse backwards can be stupid;

    4. If the angle between the wheel and the library is less than 30 cm, the steering wheel can be slightly to the left to play a quarter or half a circle, if it is not enough, continue to play a quarter to half a circle;

    5. Continue to observe the rearview mirror, and quickly return to the right direction when the body is parallel to the edge of the storage location;

    6. Observe the left rearview mirror and stop when the lower edge of the rearview mirror coincides with the yellow line.

  5. Anonymous users2024-02-11

    Reversing into the side of the rubber warehouse, is indeed a more difficult to learn skills, or need to be practiced often such as group practice to be able to be stupid, mastering the skills of reversing into the warehouse is not too stupid, may not be mastered method.

  6. Anonymous users2024-02-10

    No, there are skills in reversing, and reversing is based on the rearview mirror beam, and everyone's height is different, and the position of the rearview mirror is also different, so it is different when learning.

  7. Anonymous users2024-02-09

    The rearview mirror leaks a corner to hit the steering wheel and adjust the distance between the body and the line.

  8. Anonymous users2024-02-08

    Most people in the driver's license test feel that the pile test is the most difficult, and I feel the same way, but if you think about it carefully, there are many skills that can be summarized, and I think that the problem will be solved by paying attention to the following points during the pile test:

    1: The speed must be controlled, that is, the clutch semi-linkage speed must be controlled, and the slow speed is a must for the pile test.

    Two: when reversing the novice always does not know when to play the direction, you can not play the direction first, first straight down, when the driver's seat and the first bar of the front garage and the diagonal rod at the bottom of the library are parallel, to the right in time to play the direction, when reversing the stare on a rod on the line, when you are staring at the rod in the blind spot, quickly stare at another rod in the garage, visual distance from the body 30 cm (even if there is a slight error is not a big deal, at least the car will not touch the rod or the line).

    Three: When the vehicle enters the garage, the trunk is parallel to the front three rods or the back three rods, quickly return to the steering wheel, and when adjusting the direction in the garage, you must remember how many directions you have to go back to (because just said that the direction has been back when the body enters the garage, that is to say, the vehicle and the garage have been parallel).

    Four: remember when moving the library, "three directions, two killed" that is, the first time to move forward and backward when the direction of the death (the direction of the power to kill a little back) staring at the middle rod and the left front and rear corners of the vehicle after aligning back to the direction in time (forward to see the left front corner of the car, backward to see the left rear corner), the transfer of the library requires two forward and two retreat, according to this method the first forward and backward vehicle has been basically corrected, the second forward and backward slight adjustment.

    Five: To sum up, the exam is the most taboo and nervous, just take a deep breath before the exam! It is also necessary to remember the procedure of inverting the pile and moving the library, the program is wrong, and the technology will not pass no matter how good it is!!

    The level of experience is limited, please forgive me for the shortcomings! Finally, I wish you all the best in your exams! Get this book as soon as possible!!

  9. Anonymous users2024-02-07

    First find a few points according to your car for reference, when to hit the direction, speed, practice more, consult the coach and classmates, it is not difficult.

  10. Anonymous users2024-02-06

    After the car enters the garage, use the rearview mirror to look at the distance between the rear of the car and the sideline to adjust.

  11. Anonymous users2024-02-05

    What should I do if I can't practice for a long time? Try the "49 inverted library method", it's very simple.

  12. Anonymous users2024-02-04

    The main thing is to master the skills, and the skills can be mastered.

  13. Anonymous users2024-02-03

    There is no specific regulation for this, and it mainly depends on the individual's learning ability. Generally speaking, after two or three days of practice, the project of subject 2 will start to practice the whole field, and practice in a loop.

    Operation skills: control the driving speed and idle with 1 gear or reverse gear throughout the whole process, what speed to start, what speed to drive.

    In the process of controlling the timing of steering, we should observe carefully, grasp the key points of steering, and turn in a timely manner.

    When controlling the driving route test, the driving route of the car mainly depends on the speed of turning the steering wheel and the driving speed.

  14. Anonymous users2024-02-02

    Subject 2: Reversing and warehousing, the worse the practice, the worse the problem**? Hear what the coach has to say.

Related questions
17 answers2024-08-08

Reversing warehousing operation skills:

1. Control the driving speed and idle with 1 gear or reverse gear throughout the whole process, and drive at what speed you start. >>>More

12 answers2024-08-08

Inverted library preparation: the vehicle is parallel to the bottom line (the front wheel is positive, you can see whether the steering wheel and the left front wheel are positive) inverted left library 1, hang the reverse gear, release the handbrake, the clutch is slowly raised to semi-linkage, stabilize the clutch after starting, adjust the speed, and reverse backwards slowly; Turn back to the right rear to observe the right rear door triangle window, when the front center bar reaches the front of the triangle window, quickly hit the direction to the right (pay attention to keep the speed of the car at the slowest speed when hitting the direction). >>>More

18 answers2024-08-08

Subject 2 reversing into the warehouse test, the best way to park the car in the best position is introduced as follows: >>>More

3 answers2024-08-08

The general driver said that the semi-trailer reversing is the opposite direction, in fact, this statement is a misunderstanding, the direction is only left and right, the so-called opposite direction is based on the direction of the tail of the car comparatively speaking, but often the novice contact trailer reversing opportunities are too few, according to the idea of the opposite direction of the operation more and more confused, the simplest way to understand that the semi-trailer reversing is actually to use the tail of the integrated car to push the front box corner of the trailer to go, the left direction of the integrated car tail to the left to push the front box corner of the trailer to the left, The rear of the right direction integrated car will push the front corner of the trailer to the right, there is no opposite direction, the driving wheel is the direction, the bearing wheel is the direction, the direction wants to go to the left to play the direction, so that the person controls the car, the head pushes the waist, the waist pushes the tail, controls the direction, observes the direction, the Jinqiao semi-trailer reversing training class is the first nine-year reputation in the three eastern provinces.

17 answers2024-08-08

I specially consulted the senior instructor of the driving school, explaining that the direction was early. Before Kill Direction: After starting to hit the direction and before killing the direction, there is no sign on the right gray bar. >>>More