Which is better, acrylic or organoboard?

In life, some people are not clear about the difference between organic board and acrylic because they don't know enough about organic board and acrylic. In fact, organic board and acrylic are two different materials, the difference is still relatively large, in the following text will be through the comparison between them to tell you what are the differences between organic board and acrylic.

Organic board and acrylic difference:

1. The main characteristics of acrylic are as follows.

1) It has crystal transparency, light transmittance.

At more than 92%, the light is soft, the vision is clear, and the acrylic colored with dyes has a good color development effect.

2) Acrylic sheet has excellent weather resistance.

High surface hardness and surface gloss, as well as good high temperature performance.

3) Acrylic sheet has good processing performance, which can be both thermoformed and machined.

4) Transparent acrylic sheet.

It has a light transmittance comparable to that of glass, but the density is only half that of glass. In addition, it is not as fragile as glass, and even if it is broken, it does not form sharp splinters like glass.

5) The wear resistance of acrylic plate is close to that of aluminum, with good stability and resistance to a variety of chemicals.

6) Acrylic sheet has good printability and sprayability, and the appropriate printing and spraying process can give the acrylic products an ideal surface decoration effect.

7) Flame resistance: it does not spontaneously combust but is flammable, and does not have self-extinguishing.

2. The main characteristics of organic panels are as follows.

1) Organoboard is a thermoplastic amorphous resin, colorless, odorless, tasteless and shiny, light and inexpensive, low water absorption, good colorability, and chemical properties.

Stable, with excellent electrical insulation, especially high frequency insulation, has a certain impact resistance, weather resistance and aging resistance, good light transmittance, can resist general chemical corrosion, can be machined, hot bending, silk screen printing, blistering.

2) Strong plasticity, easy processing, weather resistance and water absorption are also very good.

3) Organic board has very good performance, such as saying that it has no odor and has a good gloss.

In this way, it looks very beautiful in appearance.

4) Its chemical properties are also very stable, its corrosion resistance is strong, it can resist the corrosion of general chemicals, and then it is also light and inexpensive, it will be much more than ordinary plexiglass, and it also has a certain impact resistance.

The above is an introduction to the relevant reference content for you on the difference between organic board and acrylic. After reading these introductions, you should have a general understanding of the differences between organic boards and acrylic. I hope it can help you distinguish the difference between organic board and acrylic, so that you can have a further understanding of organic board and acrylic.

Plexiglass and acrylic.

Plexiglass and acrylic are actually the same material, but they are two different names. Plexiglass is actually based on the name'oroglas'Translated, in fact, it is PMMA sheet, which is the so-called acrylic sheet.

Plexiglass cast panels have a higher molecular weight, so these products have better rigidity and crack resistance, and are often used to process large-format signs. In addition to this, cast plates are also widely used in the production of small batches of different color plates. The extruded plate has low molecular weight and high flexibility, which is suitable for vacuum blister molding.

Extruded panels allow for better control of sheet thickness, making it easier to produce high-volume monochrome panels.

Acrylic is a good new material that can be used to make sanitary ware after ceramics. As a special type of plexiglass, acrylic can also be used in aircraft windshields and in harsh environments for decades.

It is really difficult to distinguish between organic board and acrylic, which is not very professional, because people in the industry call acrylic board organic board or acrylic or plexiglass plate, which is actually the same plastic plate. The organic board is transparent, and the acrylic board is not very transparent, with a bit of a fuzzy state, and it is thicker than the organic board! The most used in the decoration is the acrylic board, which should be used to make the light out of the acrylic board, which is softer, and the light that is played out of the organic board is more dazzling.

Acrylic is also called PS board, commonly known as "organic board", the chemical name is polystyene polystyrene, the density is a thermoplastic, the transparency is relatively high (the light transmittance is second only to plexiglass), there is excellent electrical insulation, high-frequency insulation is especially good, the quality is brittle, impact resistance, weather resistance and aging resistance are worse than plexiglass, mechanical processing properties and thermal processing properties are not as good as plexiglass, can resist general chemical corrosion, chemical properties are stable, hardness is similar to plexiglass, The water absorption rate and thermal expansion coefficient are less than those of plexiglass, and they are cheaper than plexiglass.

The quality of organic panels is guaranteed, and the choices on the market are complicated, and it is necessary to choose a regular manufacturer.

The advantages of acrylic sheet are high transparency, good weather resistance, non-breakability, good processability, and easy maintenance. The disadvantages of acrylic sheet are poor heat resistance, unstable color, and toxic gases.

1. Advantages of acrylic sheet

High transparency. Acrylic has a certain transparency on the surface, it is made of colorless transparent plexiglass, and the light transmittance can reach more than 95%.

Good weather resistance. Acrylic sheets are very weather-resistant and can be used in different environments, whether it's sun-shining. It is difficult to change the performance of acrylic sheets, so it can be used in outdoor environments with peace of mind.

Not fragile. The performance of acrylic sheet is that it is not as fragile as glass, and even if it is damaged, it will not be splashed like glass, and it will not be used for sharp cuts like glass.

Good processability. Acrylic sheet is suitable for machine processing in terms of processing, easy to heat, easy to shape.

Easy to maintain. Easy to clean, rain can be cleaned naturally, or scrubbed with soap and a soft cloth.

2. Disadvantages of acrylic sheet

Poor heat resistance. The heat resistance of acrylic plate is relatively poor, and high temperature may deform the acrylic plate;

The color is unstable.

The dyed acrylic sheet is not stable enough in color, especially when it is placed in the sun for a long time, it will be easy to fade and other phenomena.

Toxic gases are produced.

Acrylic emits a large amount of formaldehyde when it is not fully finished and carbon monoxide, which are toxic gases.

The advantages of acrylic sheet are as follows:

1. Good adaptability. The Ark board is very adaptable, and it is very adaptable to the natural environment. Even if it is exposed to sunlight, wind and rain for a long time, its performance will not change, and it has good anti-aging performance, so it can be used outdoors with peace of mind.

2. Good transparency. Because it is a colorless and transparent plexiglass sheet, the light transmittance reaches more than 92%, so it can give people a hazy and blurred visual beauty.

3. Long life. Compared with other materials, it has the longest service life and is 16 times more impact-resistant than ordinary glass.

4. Strong plasticity. It can be easily processed into other special products, such as glass, partitions, bathtubs, etc.

Disadvantages of acrylic sheets

1. Ordinary acrylic plate because of its low hardness, so in terms of heat resistance and extensibility will be relatively low, easy to crack, fragile, easy to deform, when used to make bathtubs, because the bottom of the bathtub is stretched, so it is easy to change color, the more common is that the corners of the bottom of the bathtub will have "whitish", "yellow" and other phenomena.

2. Because acrylic sheet is an organic material, it will contain some substances that are harmful to our human body.

Acrylic sheet

Acrylic, also known as special treatment of plexiglass, is a replacement product of plexiglass, the light box made of acrylic has the characteristics of good light transmittance, pure color, rich color, beautiful and smooth, taking into account the two effects of day and night, long service life, and does not affect the use.

<> the two are different in terms of material, appearance, and performance. First of all, the materials are different. The organic board is made of some transparent polystyrene polybright guess and some chemical reagents, while the acrylic board is all made of PMMA after processing, and its material composition is relatively simple.

Secondly, the appearance and form of the two are different. The light transmittance of organic board is higher than that of acrylic board, and the overall shape is more transparent. Finally, the performance of the two is different.

The high temperature resistance and insulation of organic board are better, but its hardness is slightly lower, and it is easy to scratch the trace, and the hardness of acrylic board is very high, and its high temperature resistance is also very strong, and it can also be used, which is an environmentally friendly new material.

<>1. There are many colors on the surface of organic panels, while the color of acrylic sheets is relatively simple, because of its high light transmittance, it is usually transparent.

2. Use: Organic board and Yochafan acrylic board are important industrial materials, but organic board is usually used as the main material for the words on the door of the store, and the acrylic panel is often used to be made into display glass on the display cabinet in the shopping mall.

3. Performance transparency. The transparency of acrylic is very good, there are few impurities, and the light transmittance can reach 92%, while the light transmittance of the organic board, which is praised as "plastic crystal", is not so high. In terms of electrical insulation, organic sheets have good electrical insulation, while acrylic is slightly less electrically insulating than organic boards.

In terms of impact resistance, the impact resistance of organic sheets is not as good as that of acrylic. In terms of mechanical hail processing properties, organic sheets are not as chemically stable and process-resistant as acrylic sheets. In terms of water absorption and thermal expansion coefficient, organic panels are smaller than acrylic panels.

1. There are many colors on the surface, while the color of acrylic board is relatively simple, because of its high light transmittance, it is usually transparent.

2. Uses: Organic panels and acrylic sheets are important industrial materials, but organic panels are usually used as the main materials for the words on the front of stores, while acrylic panels are often used to be made into display glass on display cabinets in shopping malls.

3. Performance transparency. The transparency of the acrylic nuclear macro bridge is very good, there are few impurities, and the light transmittance can reach 92%, while the light transmittance of the organic board, which is praised as "plastic crystal", is not so high. In terms of electrical insulation, organosheets have good electrical insulation, while the electrical insulation of acrylic is slightly worse than that of organosheets.

In terms of impact resistance, the impact resistance of organic sheets is not as good as that of acrylic. In terms of mechanical processing properties, organic sheets are not as chemically stable and process-resistant as acrylic sheets. In terms of water absorption and thermal expansion coefficient, organic panels are smaller than acrylic panels.

PS board is commonly known as "organic board", the chemical name is polystyene polystyrene, the density is a thermoplastic, the transparency is relatively high (the light transmittance is second only to plexiglass), there is excellent electrical insulation, high-frequency insulation is particularly good, the quality is brittle, impact resistance, weather resistance and aging resistance are worse than plexiglass, mechanical processing properties and thermal processing properties are not as good as plexiglass, can resist general chemical corrosion, chemical properties are stable, hardness is similar to plexiglass, The water absorption rate and thermal expansion coefficient are less than those of plexiglass, and they are cheaper than plexiglass.

Acrylic, also known as PMMA or plexiglass, is derived from the English ACYLIC (acrylic plastic), and its chemical name is polymethyl methacrylate. It is an important plastic polymer material developed earlier, with good transparency, chemical stability and weather resistance, easy dyeing, easy processing, beautiful appearance, and has a wide range of applications in the construction industry. [1] Its products can generally be divided into pouring plates, extruded plates, and molding compounds.