Lenovo notebook should be changed from WIN7 to XP, why can t the computer be turned off?

Updated on number 2024-08-04
20 answers
  1. Anonymous users2024-02-15

    Dear Lenovo users, hello!

    For the problems you encounter, it is recommended that you start the computer first and then enter the safe mode, in the safe mode, check whether such problems appear, if not, it is recommended that you thoroughly disinfect the virus first, and then restart the computer; If so, it is recommended that you reinstall the system with a clean version of the XP system, and it is recommended that you back up the drivers and important data before reinstalling the system. You can ask us more questions.

    IDEA Forum.

    Think Forum.

    Lenovo Community.

  2. Anonymous users2024-02-14

    Notebook Windows 7 to XP to change the hard disk interface. It is recommended that you get the after-sales service and ask them to help you get it. ps:win7 is very easy to use.,Why change it to XP?

  3. Anonymous users2024-02-13

    This problem is easy to solve, first you have to have a ghost tool or a system tool such as one-click restore, and then you have to have a mirror image of the XP system, there are many on the Internet, it is recommended to choose a well-known one, and then use ghost as a system.

    The specific operation method is online or the maintenance personnel of the computer company will, and this is how our company office has changed to XP

  4. Anonymous users2024-02-12

    Workaround, reinstall the XP system.

    To replace the Win7 system with the XP system, you need to prepare two files:

    1. NT6 HDD Installer (referred to as NT6) 2. Windows XP system image (referred to as ISO).

    Installation steps: 1. Extract the ISO file to a non-system disk directory.

    2. Move NT6 to the directory where the image is extracted and open it.

    3. Click Install, and click Restart after the installation is complete.

    4. Select mode 2 when you turn on the machine.

    5. After entering the installation interface, click the drive option when selecting the partition, select the original system partition and click Format, and then complete the system installation according to the prompts.

  5. Anonymous users2024-02-11

    Change the mode of your hard drive and pull it OK. Lenovo can install win7 and is a dual graphics card, the general system default mode is only win7 or win8. You can change it back and you're good to go!

  6. Anonymous users2024-02-10

    It's all fresh if you don't have a problem, this machine is a dual graphics card, XP only supports single graphics card mode, and only integrated graphics cards can be used.

  7. Anonymous users2024-02-09

    I don't know how you came up with this option.,You definitely didn't get it right.,Don't reply to such a prompt under DOS.,You set the right startup items.,And then it's simple to choose a one-click installation system to the C disk.,Let him install it automatically.。

  8. Anonymous users2024-02-08

    If you use a CD-ROM to install it, enter the boot interface and change the first driver item to CD driver direction, and then change the first item back after installation.

  9. Anonymous users2024-02-07

    Do you click on the installer on the XP disc directly in the win7 system to install it? This is definitely not a problem, you should boot the computer from the XP boot disc after booting it up, and then install it.

  10. Anonymous users2024-02-06

    Is yours a clone disk or an installation disk? The installation disk is definitely not good: the premium version cannot be installed with the low-level version.

  11. Anonymous users2024-02-05

    Dear Lenovo users, hello! For this question of yours, you can refer to the Lenovo Technology Forum, which has the most complete technical questions, and there are professionals in the forum to answer your questions, and you can also communicate your questions with them.

    IDEA Forum.

    Think Forum.

    Lenovo Community.

  12. Anonymous users2024-02-04

    Dear Lenovo users, hello!

    After the operation, you need to format the whole disk and repartition and install the system, in addition, the XP system is about to stop updating, we recommend you to use Win7 and Win7 or above, if your pre-installed system is Win8, then this system is genuine, it is compatible with most software, if some special software needs to run under XP, then you can make corresponding changes, we recommend that you use the XP system integrated with AHCI for installation.

    IDEA Forum.

    Think Forum.

    Lenovo Community.

  13. Anonymous users2024-02-03

    In a word, I will hold you back,The current ** notebook does not have a compatible motherboard、Graphics card、Network card、Audio and other drivers of the XP system,Even if individual machines can use some compatible drivers,But other accessories are not driven,Your notebook is a waste wood,It's rubbish to use for surfing the Internet!!

  14. Anonymous users2024-02-02

    Now many new computers don't support XP system, you can try XP, SP3 If it doesn't work, just give up.

  15. Anonymous users2024-02-01

    Nowadays, computers are rushing to the hardware to prohibit the installation of XP system, win8 is actually not bad.

  16. Anonymous users2024-01-31

    That was the old computer process. None of the new computers can be installed with XP. It doesn't work any way. The hardware is set to lock.

  17. Anonymous users2024-01-30

    How good it is for you to change to win7 64-bit.,Why do you want to change XP?

  18. Anonymous users2024-01-29

    Needless to say, please look at this, absolutely OK. Thank you, satisfied with the adoption.

  19. Anonymous users2024-01-28

    The correct operation steps of Lenovo computer XP to win7 are as follows:

    1. First of all, make the U disk into a U depth U disk boot disk, restart the computer and wait for the boot screen to appear, press the start shortcut key, select the U disk to start to enter the U depth main menu, select the "Run U Depth Win8PE Installation and Maintenance Version (New Machine)" option, and press the Enter key to confirm.

    2. Enter the win8pe system, the installation tool will pop up by itself, click "browse" to select and save it to the win7 system image file in the u disk.

    3. Wait for the U deep PE installation tool to automatically load the win7 system image package installation file, just select the installation disk location, and then click the "OK" button.

    4. At this time, click the "OK" button directly in the pop-up prompt window.

    5. Then the installation tool starts to work, please wait patiently for a few minutes.

    6. After completion, a prompt will pop up to restart the computer, click the "Yes (Y)" button.

    7. At this time, you can unplug the U disk, restart the system to start the installation, no need to operate, wait for the installation to be completed, and finally restart it before entering the system desktop.

  20. Anonymous users2024-01-27

    Spend money to install the system inside a computer repair shop. I also make a boot USB flash drive at home. And so on try to install the system.

Related questions
16 answers2024-08-04

Dear Lenovo users, hello!

IDEA Forum. >>>More

5 answers2024-08-04

The system itself does not have this functionality and requires similar software to be installed.

12 answers2024-08-04

Find the hard drive, right-click to delete all the partitions, and save the changes.

7 answers2024-08-04

Win7 Setup Notebook Touchpad Method:

1. First, select and click the Synaptics fixed-point device icon in the lower right corner of the taskbar to launch the settings interface. >>>More

23 answers2024-08-04

Enter Win7 security modeMethod 1: Press the F8 key to enter when you boot up. >>>More