The sewer is clogged during the Spring Festival and you can t find a dredging worker, what should I

After the sewer is blocked, there can be a variety of ways to dredge, the first way, we can directly use the dredging tool, there are many types, depending on the type of sewer at home. The second way is to buy dredging agent, which is also more convenient, directly put the dredging agent into the sewer, then add water to rinse, rinse several times, so that the foreign matter in the sewer can be removed directly. One means is to directly find a regular dredging company or find a professional dredging personnel, which requires the corresponding fee, but it is still very convenient to operate and more convenient.

If the sewer at home is blocked, then you can directly use the kind of pipe dredging agent sold on the market to dredge, try to buy some good quality dredging agent, put it directly into the sewer after buying it, and then flush it with warm water.

<>Of course, we can also make some dredging agents at home, for example, you can add some edible vinegar with some hot water, and then add appropriate detergents. Scrubbing one side of the pipe with this mixture, then pouring it directly into the pipe, followed by rinsing with 200 ml of hot water, in our daily life, the phenomenon of clogged sewers often occurs. If encountered.

In this case, first of all, we must clean up the sewer blockage in time, if the cleaning is not clean, you can use pipe dredging agent, which is sold on major shopping **, and we can buy it directly from the Internet. In addition to pipe unclogging agent, there is also a tip, which is to add an appropriate amount of detergent to the boiling water and pour it on the drain nozzle, but it should be noted that when watering, do not be impatient, and pour it slowly and little by little.

Do a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me more, if there is something wrong. If you like the author, you can also follow me, your like is the biggest help to me, thank you.

I think for such a situation, you can try to use a pump to dredge, or vinegar and soda to dredge.

I think the best thing to do is to find a long wire, then bend one end to the hook, and put the hooked end into the drain and poke it to unclog it.

At this time, you can unclog the sewer by yourself, prepare a leather picker, you can use the skin to dredge the sewer.

Hello, dear, according to the information collected, the sewer blockage question should generally contact the local ** health management department. For example, the Environmental Protection Agency, the City Administration, or the Sewer Management Center, which send experienced technicians to the site to solve the problem. You can also find a professional pipeline dredging service unit to clean up the blockage and solve the problem through high-pressure water dredging, ventilation and dredging.

If the sewer is severely clogged, it may be necessary to remove the pipe to clear the blockage, or replace it with a new one. Therefore, if the blockage is in the wall, it is also necessary to use through-wall drilling to dredge it. In addition, depending on the available technical capabilities, sewer pipes can also be detected, cleaned and repaired by robots, which is generally rented and easier to operate.

Sewer blockage will have a great impact on residents' lives and environmental hygiene, so it is necessary to deal with it in time. Here are some ways to deal with a clogged drain:

1.Mechanical discharge method: use mechanical equipment such as through pipe or high-pressure water to flush or drag out the dirt in the pipe, and then use a vacuum truck or sewage suction truck to remove the dirt.

2.Chemical discharge method: use chemical agents to decompose the sediment in the pipeline with the help of chemical reaction, and then flush the pipeline with a large amount of water to promote the discharge of the sediment.

3.Manual dredging method: Use hand tools such as serpentine pipes, hooks, etc. to remove the blocked objects, and then rinse the pipes with water. However, this method requires a large amount of manpower and material resources, and the effect is limited.

4.Hydrostatic cleaning method: high-pressure water is used to spray high-pressure water to the blockage to flush the dirt in the pipeline and remove the blockage.

5.Renovation of drainage pipes: The design or service life of drainage pipes leads to frequent blockages, and the pipes need to be redesigned or rebuilt. Therefore, before construction, it is necessary to fully consider the carrying capacity of the sewer, and use high-end imported or domestic leading brand equipment and materials.

In order to prevent similar situations from happening when dealing with sewer blockages, the following principles need to be followed:

1.Reduce clutter: Be careful not to drop large pieces of clutter and too much paper, hair and other objects into the drain in your daily life.

2.Regular maintenance: Regular cleaning and sewage discharge of sewers can effectively prevent sewer blockage.

3.Choose the best drainage pipes: In the drainage system design of new buildings, the selection of the best pipes and equipment materials can reduce the incidence of sewer blockage.

In conclusion, the cleaning and maintenance of sewers is a must and cannot be neglected. Only by doing a good job in the quality supervision of drainage pipes and strengthening citizens' awareness of environmental protection can we make sewers clean and unsound.

Ways to unclog sewers:

1. Dredging with sewer dredging agent, you can mix water with sewer dredging agent, and then dredge the sewer according to the method suggested above in its packaging, which is the most suitable method for sewer blockage.

But if you don't want to buy a sewer unclogant, we can use the laundry detergent at home with baking soda and vinegar to unclog the drain ourselves. The method is very simple, first pour laundry detergent and baking soda into the blocked drain, then pour some vinegar into it, and finally use the hanger at home to poke it.

2. Dredging with a spring drain passer, this method is more professional, because the workers we generally see dredging sewers use such a thing to dredge. In the same way, we can use the above method to make a cleaner, or we can just buy a sewer unclogant, pour it into the sewer pipe, and then insert a spring drain to stir the sewer back and forth.

This method is to replace the upper hanger with a spring drainer, because this thing can hook out all the hard objects that cannot be washed away in the sewer due to its unique structure, and this method can be said to be the most stable way to dredge the sewer.

3. Use caustic soda to dredge, this method is also very effective, but it should be noted that if it is a plastic drainage pipe, then do not use this method, otherwise the water pipe may be burned.

We first boil a pot of boiling water, and then pour the caustic soda into the sewer mouth, and then in the blocked place, the caustic soda will adhere to the dirt. Then pour the boiled water into the sewer mouth and let the water dissolve the caustic soda, so that the reaction that occurs during dissolution can melt all these stains, and then rinse the sewer mouth with a little more water.

1.Soda + vinegar.

This is the use of chemical principles, first pour half a cup of cooked soda powder into the sewer, and then pour half a cup of vinegar, the soda reacts with the acidic substances in the vinegar to remove the grease adhered to the pipe.

2.Caustic soda + hot water.

Sodium hydroxide is also known as caustic soda and caustic soda, and it is important to wear protective gloves when operating. Put an appropriate amount of caustic soda (about 50 80 grams at a time) into a container, add about 60 hot water appropriately, wait for the hot water and caustic soda to fully fuse, and then pour it into the sewer.

3.Pump.

Insert the hose of the pump into the drain, then put in a small amount of clean water, constantly pumping it in, and in cases where the blockage of the drain is not very serious, it can be unblocked.

4.Dredging agents.

Generally, pour one-fifth of the dredging agent into the floor drain first, wait for 24 hours of infiltration, and try to avoid using water during this period. After that, take hot water and wash it down, and the foreign matter will be decomposed.

If you still have questions about decoration, environmental protection, home decoration pollution, home design and layout, customization, etc., you can consult Litian Decoration, and all decoration problems can be answered for you!

Household leather bowls. Household leather bowls are a common tool for cleaning up blockages. Simply place the bowl over the toilet drain and press down firmly several times to create pressure and push the buildup out. This method is simple and easy to do, and tends to be very effective for general blockages.

Toilet spout unclogger.

The toilet bowl tip unclogger is a professional tool with strong thrust. Insert the needle-nose unclogger into the toilet drain, press down firmly, and quickly pull it out. This method effectively cuts and pushes the build-up to unclog it.

Chemical dredging agents.

Chemical dredging agents are a common solution to the problem of clogged toilets. Simply pour the right amount of chemical unclogging into the toilet bowl and wait for a while for the chemical to react with the blockage and dissolve or loosen the blockage. However, it is important to note that when using chemical dredging agents, be sure to follow the safe operation requirements on the instructions.

How to prevent a clogged toilet.

In addition to knowing how to fix the blockage problem, it is equally important to prevent the toilet from clogging. Here are some tips to prevent blockages:

Be careful to use the amount of paper.

Using too much paper is one of the main causes of clogged toilets. Therefore, using the right amount of paper is the key to preventing clogging. If you find that the toilet is clogged frequently, check that you are using too much paper and adjust the amount used appropriately.

Avoid rushing into substances that are difficult to decompose.

Flushing hard-to-break substances down the toilet bowl is one of the common causes of blockage. Avoid flushing cotton balls, wet wipes, sanitary napkins, and other items into the toilet to avoid clogging.

Inspect drains regularly.

Regularly inspect the toilet drain for problems and, if necessary, clean the pipes promptly to prevent the build-up of blockages.

When the sewer of the unit is clogged, it is necessary to take steps to clean it up in time. If no action is taken, then the problem will gradually worsen and lead to serious waste and hygiene problems. Here are some effective ways to clean up your unit sewers:

Step 1: Locate the problem.

First of all, it is necessary to confirm which part of the sewer is clogged. If you can tell which pipe is clogged by a simple observation, you can easily clean it up. But if the problem is more serious, then you need to find all the doubts and blockages.

Step 2: Clean the sewer pipes.

If the drain is only clogged with small objects such as hair, you can use a pipe to clean it up. More often than not, this small, low-cost tool will do the trick.

If something is harder to clean than a feast, some chemical elements can help, too. You can use alkaline water to clean up at home, while you can use a more potent acidic solution in your unit.

Step 3: Ask a professional to repair it.

If you've tried all of the above and the drain is still clogged, then you need to call in a professional to fix it. Some problems require more advanced equipment or more power to solve the problem.

In conclusion, when a unit has a clogged sewer, it is best to take immediate action to prevent the problem from becoming more serious. If one or more of the above methods do not solve the problem effectively, be sure to contact a professional in time to deal with it.

In life, many people will encounter the problem of sewer blockage, if there is a foreign object in the sewer, then it will cause blockage. If it is not cleaned up in time, it will lead to more and more foreign objects, and the water will go down very slowly, which will cause headaches for the owner. With a few tips, you can easily unclog your drain.

Baking soda and white vinegar are often used to unclog drains, which is desirable and has obvious results. Since little Jean's soda is alkaline and vinegar is acidic, a chemical reaction occurs when the two are mixed together. <>

There is a lot of carbon dioxide and a lot of bubbles, and pouring it into the sewer will increase the air pressure and clear the sewer。If the kitchen drain is clogged, pour salt and baking soda into the sink and mix with white vinegar until there is a reaction and a lot of bubbles appear, and then flush them down the drain. Boil another pot of hot water, wait until it is cold, and then pour it into the sewer pipe, so that the foreign matter in the sewer pipe will be cleaned up.

If you don't have white tan vinegar at home, you can also use dredging tools to carry out, there are special tools for dredging sewers on the Internet, ** is not expensive, only a few yuan, it is very convenient to dredge the sewer after buying home. The unclogging tool can be used repeatedly, whether it is in the kitchen or bathroom, as long as the sewer is blocked. When taking a bath, be careful to clean up the fallen hair and put it in the trash, so that it does not flow directly into the drain, as it will cause clogging after a long time.

Usually, the sewer blockage in the kitchen will be very serious, because there will be a lot of garbage and dirt when washing vegetables, it is easy to fall into the sewer, and it will cause blockage after a long time. Not only that, but it will also produce a peculiar smell, which is very unpleasant. If there is a sewer blockage, it must be removed in time, and now there are sewer dredging agents in the supermarket, which can be purchased and used directly It is also very convenient.