What should I do if the sewer is clogged?

Sewers clogged with sand can be triedOpen the inspection opening at the bottom of the water storage pipe to drain the sand. If it can't be opened, flush it out with water. If the sand is mixed with cement or paint and clumps should be broken, find another hose, fix one end to the faucet, and wrap the other end with a towel and plug it into the sewer inlet, and hold it with your hand, open the faucet and rinse.

Sewer blockage unclogging method:

1. Use water pressure dredging method.

This method is used more frequently in life, as long as you buy a water pipe, let one end of it put on the faucet, and the other end into the place where the pool is blocked, then wrap the cloth around the rubber pipe, and plug it tightly into the drain of the pool, and then unscrew the faucet to open the water, the pressure of the water can usually wash away the blockage.

2. Soda and vinegar dredging method.

This is a very clever chemical dredging method, first pour half a cup of cooked baking soda into the pipe, and then add half a cup of vinegar, and the soda reacts with the acid in the vinegar to remove the sticky stuff in the pipe.

3. Log dredging method.

This method is somewhat similar to the first one, first insert a log stick of length close to the drain into the pipe, put a certain amount of water in the pool, and quickly pump the log up and down without interruption, and under the action of suction and pressure, the dirt in the pipe will be washed away.

First of all, it is necessary to find out the main reason for blocking, rather than blind dredging, because only by finding out the cause can we take the correct and effective dredging method; Then choose the correct dredging method according to the degree of blockage, if it is a general residue blockage, you can solve it with a simple tool, if it is a serious blockage, you should ask a professional dredging personnel to deal with it.

How to unclog a sewer.

When the sewer in the home is blocked, whether it is the bathroom or the kitchen, people will ask how to unclog the sewer. Common methods are:

1. Pour 50-100 grams of waterway dredging agent into the sewer, and rinse with a large amount of water after about 20 minutes;

2. Go to the store and buy a hand-cranked spiral wire or other tools for dredging;

3. You can pour baking soda and vinegar into the sewer to treat the oil stain;

4. Insert a log into the sewer for dredging.

The above methods are more commonly used, and there are many more methods, which should be selected according to the specific situation.

If it is getting more and more blocked, it means that the blockage cannot be treated with a dredging agent, and can only be dredged internally by physical methods. You can choose to buy dredging tools at the supermarket or choose sewer dredging services at a housekeeping company.

With dredging agent, there may be smoke and a lot of odor when you just pour it in, and this is the dissolution process. Then flush the water, the dredging agent has a residual degree in the pipe, and the residue will solidify with other residues, which will exacerbate the blockage.

The solution is to flush the hot water, which will dissolve the residual water in the water as soon as possible and drain away completely.

Notes:

1. The first thing is that the sewer installation should not leak to ensure that the drainage port of the reserved equipment is accurate, so as to facilitate the installation of equipment in the future.

2. There should be a slope to ensure that the drainage is unimpeded in the future.

3. The material of the drainage pipe is generally PVC pipe, and the high floor is best made of double-walled hollow pipe or pipe made of spiral noise reduction material, because it is a concealed project, so the best material must be used, and the best material must be used, and it must be odorless and not leaking, and it is best to have flame retardant characteristics. The slope of the drainage pipe should be generally not less than 1%, and the drainage slope should be paid attention to when installing the drainage pipe, which is conducive to the timely discharge of sewage.

4. The anti-counterfeiting sewer pipe on the high floor should also be equipped with a fire arresting ring, which can effectively prevent the upward spread of the fire source in the lower floor and effectively avoid accidents.

These solid things should be sodium percarbonate, sodium carbonate and other alkaline substances, professional can be dredged with hydrochloric acid, and the home can use toilet cleaner, the acidity of toilet cleaner is much greater than vinegar. After pouring toilet cleaner on the white collapsing block, the hard block produces a large number of bubbles due to acid and alkali neutralization. Ten minutes passed, and the white lump was completely dissolved.

The sewer is like a white lime block, which may be discharged from the kitchen and the room, and the wastewater contains a lot of grease, and after the grease-containing sewage enters the sewer, the concentration of oil and water is separated and accumulated, and the temperature of the environment is low, and the grease condenses into lumps.

The clumps of grease that have congealed look like white crystals, indicating that the dirt has been formed over a long period of time. If the sewer is blocked, you can use a sewer unclogging agent, pour it into the pipe, wait 20 minutes, and then pour hot water to unclog it.

Before unclogging the sewer, check where the blockage is, prepare rubber gloves and unclogging tools, and unclog the main pipe first, and then unclog the small pipe. Wear rubber gloves and insert the unclogging tool into the drain until it is no longer possible.

Clogged sewers are a common problem, and here are some possible ways to fix it:

1.Hot water flushing: Pour hot water down a clogged drain and try to fix some simple clogged problems. Hot water softens the blockage and makes it easier to flow.

2.Use Chemical Drains: You can buy chemical drains from the store and use them as directed. These drain agents break down clogged materials and clear sewer blockages.

3.Use sewer unclogging tools, such as plumbing or toilet unclogging. Insert the unclogger into the drain and push firmly a few times to push the blockage out.

4.Manual removal: Wear gloves and use your hands or tools such as pliers to remove the blockage directly. This method requires caution and requires wrapping the blockage in a paper towel or plastic bag to avoid soiling the surroundings.

5.Seek professional help: If the above methods are ineffective, or if the blockage problem is serious, it is recommended to seek professional sewer unclogging services. Professionals with more specialized equipment and tools are able to solve the blockage problem more effectively.

Precautions: Clean your drains regularly to avoid accumulating large amounts of debris and buildup.

Avoid dumping large pieces of material such as toilet paper, grease, and food scraps directly into the drain.

Install a netting or filter in the sewer to prevent large pieces of material from entering the sewer.

It is important to note that severe sewer blockage issues may require a professional to deal with them before they cause more damage.

If the sewer is blocked, you can use caustic soda to unclog, baking soda to unclog, pipe unclogging agent, iron bar unclogging, and laundry detergent.

1. Caustic soda dredging.

Take out an appropriate amount of caustic soda, put it in a basin, and add an appropriate amount of hot water. After the caustic soda and water are fused, the stove is finally poured into the pipe, and it can be quickly dredged after standing for about 20 minutes.

2. Baking soda dredging.

Prepare a container, add appropriate baking soda and white vinegar to it, stir it well, pour it into the pipe, the oil stain inside will immediately produce an acidic reaction after encountering baking soda and white vinegar, and slowly decompose the oil stain into a hidden segment.

3. Dredging of pipeline dredging agent.

There is no need for time-consuming and laborious operation, just pour it directly into the blocked pipe, let it sit for about half an hour, and finally rinse it with water.

4. Dredging of iron bars.

The easiest way is to prepare something as hard as an iron bar. Then, poke it into the clogged sewer, and if the blockage is not very severe, you can poke the blockage directly.

5. Dredging of laundry detergent.

The sink drain in the kitchen will accumulate a lot of grease and food residue over time, which will lead to clogging, and in this case, Qihong only needs to prepare a cup of laundry detergent and three cups of hot water to open it. The dissolved laundry detergent can slowly penetrate the clog and make it slip off, which is very simple and convenient, and this method is very suitable for food residue clogging.

Since the pipe is blocked, the blockage will be opened, if it is a chopstick, spoon and other hard objects, you have to hook it out.

2. Pneumatic method, for less serious blockages, you can use the pressure of gas to flush away.

3. Water pressure method, the sewer is filled with water, press down with a leather plug, and then lift it violently, so that a certain pressure and pumping force will be formed, and the blocked debris may be washed away.

4. The main reason for the blockage of the sewer pipe is that the grease is attached and accumulated on the inner wall of the pipe, making the pipe narrower and narrower, and finally it is easy to be blocked by fine vegetable crumbs and rice grains. This is very similar to the process by which a patient's blood vessels become thinner and cause embolism and stroke. This blockage accounts for the vast majority and can be treated by allowing the fat to dissolve.

5. If there is a blockage under the main sewage pipe, once the sewage is not smooth, the sewage will go back to the nearest outlet from the blockage point, and you can only contact the dredging pipeline company in this case.

The sewer is clogged, so hurry up and learn this trick.

Clogged sewers in homes are a very common problem in life. There are three types of sewer blockages: hard blockages, hair blockages, and oil blockages.

If it is not dredged in time, there will be stagnant water, and the smell of foul sewers will be permeated in the home, and the discharge water will also be affected. Here are a few ways to unclog sewer pipes.

Please click Enter a description.

Sewer Dredging Agent: You can use a sewer unclogging agent to mix water, and then unclog the sewer according to the method indicated above according to its packaging, this method is the most effective way to unclog the drain.

Spring dredging method: This method is used by general professional maintenance personnel. You can also use the above method to make a cleaner first, or just buy a sewer unclogant, pour it into the sewer pipe, and then insert a spring drain to stir the sewer back and forth.

The spring drain can be replaced with a hanger, and the effect of twisting a bending after the hanger is disassembled, because this thing can hook out the hard objects that cannot be washed away in the sewer due to its unique structure, and this method can be said to be the most stable way to dredge the sewer.

Please click Enter a description.

Caustic soda dredging method: This method is also very effective, but it should be noted that if it is a plastic drainage pipe, then do not use this method, otherwise it may burn the water pipe. We boil a pot of boiling water, and then pour the caustic soda into the sewer mouth, and then in the blocked place, the caustic soda will adhere to the dirt.

Then pour the boiled water into the sewer mouth and let the water dissolve the caustic soda, so that the reaction that occurs during dissolution can melt all these stains, and then rinse the sewer mouth with a little more water.

Please click Enter a description.

The above are the three commonly used methods to unclog the sewer pipe, if the sewer pipe is blocked, these three methods will not have any effect. At this time, you should call a professional maintenance master.

What should I do if the sewer is blocked? It can be used with a spring-loaded pull hook, with a turning spiral, built-in spring, and easy handling of soft materials.

Sewer is a kind of urban public facility, which refers to the pipe of the building to discharge sewage and rainwater; It also refers to the underground passage of a city, factory or village to drain sewage and rainwater.

It is to use a wet rag to roll into a roll to plug the floor drain first, and then use an air pump to pump the air from the sink to the air, and also use a rag to roll the air outlet pipe of the air pump into a thickness that is suitable for the water outlet of the pool to prevent air leakage.

Some pipes will be scaled after a period of use, so that the inner diameter of the pipeline becomes thinner and affects the normal sewer discharge, this dredging must use high-pressure water to clean the pipeline, remove the dirt on the inner wall of the pipeline, and expand the inner diameter of the sewer pipe.

Preparation: Two chopsticks, an appropriate amount of tape, and a plastic bottle.

Solution: 1. Glue the ends of two chopsticks of equal size together with adhesive tape to increase the length of the chopsticks.

2. Remove the mouth of the plastic bottle.

3. Cut into spiral plastic strips of equal width.

4. Take one end of the plastic bottle and stick it to the end of the chopsticks.

5. Wrap the remaining plastic strips around the chopsticks.

6. Stick the chopsticks with plastic strips into the mouth of the sewer, and after dipping down as much as possible, stir them in a few times.

7. The things that are pulled up are the debris that blocks the sewer, take it out and sort it out, and dredge it a few more times.

Pour in half a bowl of baking soda twice as much white vinegar and react to clean the stains, then pour in hot water. Baking soda and toilet water and laundry detergent, stir well with warm water, and pour it into the drain to prevent odors and small flying insects. Perfect.

Clogged sewer pipes are a very common problem in daily life, causing many people to feel an unusual headache. If you don't know the correct dredging method, dredging is really time-consuming and laborious, and the effect is not very obvious. Here are a few very simple ways to unclog a plumbing sewer toilet.

Please click Enter a description.

1.Soft steel wire dredging method. The flexibility and elasticity of the soft steel wire in the rear part penetrate deep into the pipeline, dredge the pipeline, remove foreign matter, and achieve the purpose of dredging the pipeline. The soft steel wire in the turntable can be replaced, when the steel wire is used softer.

2.Air pressure dredging method. Its working principle is roughly the same as that of the pump, which opens up the pipeline through atmospheric pressure to achieve the purpose of dredging the pipeline.

Professionally unclog blockages caused by various soft and hard substances (rags, cleaning balls, plastics); Blockage caused by various V-shaped S-shaped bends (cement, sand or hair falling into the decoration) and other reasons. Dredging sewers, dredging toilets, dredging toilets, dredging floor drains, dredging vegetable sink drains, dredging bathtubs, dredging basins, dredging small holes and other types of pipe dredging.

Please click Enter a description.

3.Water pipe dredging agent dredging method. Pour 50-100 grams of waterway dredging agent into the sewer, and rinse it with plenty of water after about 20 years; Go to the store and buy a hand-cranked spiral wire or other tool to dredge it; You can use baking soda and vinegar to pour down the drain to treat the oil; Plug a log into the sewer for unclogging.

The above are common methods for unclogging plumbing sewer toilets. With the above methods, most of the blockages can be unblocked. If the blockage is particularly severe, you need to ask professional personnel to help dredge it.

Please click Enter a description.