How to set up a network shared folder, how to set up a network shared folder in win7

Log in to the system as an administrator, and open [Control Panel] - [Network and Sharing Center] - [Change Advanced Sharing Settings] in order. Select the following four options: Enable Network Discovery, Enable File and Printer Sharing, Enable Public Folder Sharing, and Turn Off Password Protected Sharing. It is recommended to also enable streaming ** sharing, and select [Allow Windows to manage homegroup connections] under the Home or Work column.

Right-click the folder you want to share, select [Properties] - [Share] - [Advanced Sharing], select [Share this folder], click Apply, and close it after confirmation. (Note: If the upper-level folder is shared, the subfolders below it are also shared.) )

Change the security permissions for the folder to Allow anyone to access. Right-click the shared folder, select [Properties] - [Security] - [Add], enter "everyone", and click OK. In the Permissions box, select the permissions you want to grant, for example:

Full Control", Change, and Read.

Tutorial on setting up a network shared folder, adding a new user and setting to modify the user permissions of a shared folder.

Suppose you want to share the "**" in the D drive of the unit"Folder.

1.First, right-click on the "**" folder and select "Sharing & Security".

The "**" properties dialog box appears, and put the small boxes in front of "Share this folder on the network" and "Allow network users to change my files".

2.On the desktop, find "My Computer" and right-click "Manage" to open the "Computer Management" dialog box.

Click Local Users and Groups, click Users, and find the guest user on the right.

3.Double-click the guest user and remove the checkmark in front of "Account has been deactivated" to indicate that the guest user has been opened.

4.Click Start - Settings - Control Panel, double-click "Windows Firewall" to open the "Windows Firewall" dialog box.

Click "Disable (not recommended)" to turn off Windows Firewall.

5.Click "Start" - "Run" in the lower left corner, enter , OK, and open "Local Security Policy"; Or you can find the local security policy from "Start" - "Settings" - Control Panel - Management Tools, and double-click to open it.

Locate "Local Policies" - "User Rights Assignment", find "Deny access to this computer from the network" on the right, and double-click to open it. Then delete all the users and leave none behind.

6.Find "Local Policies" - Security Options", find "Network Access: Shared and Security Mode for Local Accounts" on the right side, double-click to enter, set it to "Guest Only - Local Users Guest Authentication", the same is "Security Options", scroll down on the right side, and find "Account:".

Local accounts with blank passwords are only allowed for console logins".

Double-click to open it and set it to "Disabled".

7.Finally, you need to know your computer name, and your local IP address.

Computer nameFind My Computer on the desktop, right-click, select Properties, select "Computer Name", and you can see the name of your computer.

You can open the network neighbor on the desktop, click "View Network Connection", double-click "Local Connection", open the properties, and select "Support" to view the local IP address.

You will then be able to access your computer's shared folders from a separate computer on your local area network. There are two ways to access a shared folder.

1 Click Start in the bottom left corner - Run, enter the IP address of the computer you want to access, e.g. and then OK, and all the shared folders of the computer you want to access will appear.

2 Click on the online neighbor, view the workgroup computer, find the computer name of the computer you want to access, double-click, and the shared folder will appear, and you can access it normally.

Network sharing is to use PC as the carrier for information exchange and resource sharing. If we want someone else to share our folder, we need to go through some setup to do it. Let's take a look at how to set up a network shared folder in Win7.

01 Find the folder you want to share, right-click and select "Properties".

02 Click "Share".

03 Click "Share" below.

04 To add the user you are running the visit, we can select everyone here.

05 Click the triangle drop-down box in front of the rear, select everyone, and click Add.

06 Then click on the user's triangle drop-down box to set permissions.

07 This means that the permission setting is successful.

08 Click OK to complete the sharing.

09 Then, on another computer, enter the IP address of the computer where the shared folder is located during Operation.

10 Click OK. This will allow you to see the shared folders.

Hello, I have seen the question you asked, I am sorting out the answer, it will take some time to type. Please wait a moment

Here's how: 1First, enter the computer desktop, right-click "My Computer" - "Manage", and click to open.

2.In the "Manage" page that pops up, find "Local Users and Groups", and then "Users". 3.

Then right-click on an empty space in the user interface and create a new "New User". 4.Here set the account name and password, take setting the username as "grace" as an example, and then set the password.

Below the box, uncheck "Users need to change their information the next time they log in", and then select "Users cannot change passwords" and "Passwords never expire". 5.After the above operations are completed, click "Create", and then you will return to the initial interface, click "Close".

6.At this time, you can see that the user of "grace" has been successfully created. 7.

Next, find the folder you want to share, right-click on the folder, and select "Share" - Specific User. 8.On the pop-up page, click the triangle next to the checkbox and select Grace.

9.Once you've selected your users, click "Add". 10.

Then we can set the permissions of the selected user in the inverted triangle behind it, here set the bit "Read", and then click "Share". 11.The shared folder is set up, and others can access the shared folder with the username "grace" and password.

Open the Network and Sharing Center Advanced Sharing Settings and you'll see the options for sharing.

Let me ask you first, how many desktops and how many laptops? Do you have a router or switch (or do you have a desktop with dual NICs)?

It depends on whether you're using a laptop or a desktop, and if you don't know how to help you.

Right-click on the folder you want to share Share & Security.

In"Share this folder on your network"Tick the option in front of it, and OK is OK.

If the file is allowed to be copied or modified. Also put a checkmark in front of "Allow network users to change my files".

Open the system server service. Then right-click on the folder Share and you're done.

On the C drive: documents

andsettings\all

There is a directory called "Shared Documents" in the users directory, and you can directly set it as a shared folder in the office. Method:

My computer C drive documents

andsettings\all

users to share a document, right-click to share a document, select Share & Security, tick before "Share this folder on the network" in the pop-up dialog box, if you allow others to add files to your folder, then check before "Allow network users to change my files", and finally click Apply and OK.