Win7 shared folder to the specified computer

Win7 shared folder to the specified computerMethod.

1. Set up LAN sharing to specific users through the operating system.

Let's take win7 as an example, and the setup method is the same for other operating systems.

Procedure. 1. Right-click the folder in Windows 7 and click Properties.

2. Click Share - Advanced Sharing.

3. Click Share this folder - Click Permissions.

4. In the folder permissions, click Add.

5. Select the location and the person you want to share it with, and click OK.

6. Then check the permissions given to the user, whether it is read-only or read-write. After the setting is complete, click OK, and then turn off to complete the setting.

Method. Second, with the help of LAN sharing management software, shared folder permission setting software.

For the setting that the server shared folder is only accessible to specific users, in addition to using the above operating system setting method, you can also use some shared folder permission setting software and shared folder monitoring software to achieve it.

For example, there is a "general trend to the LAN shared file management system" (** address is installed on the shared file server, it can automatically scan all shared files on the server, and you can set access rights for specific accounts for sharing, that is, only specific users can access server shared files, and even only specific accounts can access specific shared folders. The specific settings are as follows:

Click on the right side of the shared folder to select a shared folder, then select a user group on the left (mouse click), and then check "Prohibit reading" in the "Access Permissions" section at the top of the software, so that all users under the group cannot access the shared folder. As shown in the figure below:

Figure: Disable user groups from accessing shared files.

After that, we select the shared folder again, then click on a user under the user group on the left, and then uncheck "Prevent reading" in the "Access permissions" section, so that only this user can access the shared file. As shown in the figure below:

At this point, we have realized the setting of LAN sharing to specific users and folder sharing to specific users. However, it should be noted that if you want each user or department on the LAN to only have access to their own shared folders, you need to set up a server login account for each user or department on the server and set access permissions for them.

In addition, we can also implement the function of setting hiding for folders that do not have shared access, that is, hiding shared folders that users do not have permission to access, and hiding shared files that users do not have access to. The specific settings are as follows:

In this way, when users who do not have access to a shared file access can only see the shared folders that they have access to, but not the shared folders that they do not have access to.

Right-click the folder and click Properties.

Click Share - >Advanced Sharing].

Click Share this folder - > click Permissions.

In Folder Permissions, click Add.

Select the location and the people you share it with, and then click OK.

Then check the permissions given to the user, whether it is read-only or read-write. After the setting is complete, click [OK] - >OK], and then close to complete the setting.

On your computer, create a new username and password.

1. Right-click "My Computer" -> Management -> Local Users and Groups -> Users -> right-click on the blank space in the window > new user.

Enter [Username] [Password] and uncheck "User next time." Change Password" option.

2. Right-click the folder you want to share - > Properties - > Share.

Enter the username you just created and delete the system users from the list below.

This way, the other party can access your shared folder through your online neighbors or IP address.

Have you ever encountered a situation where you can't find a shared folder at work? Even if there are folders shared by colleagues, we can't even see the computer. How you have encountered this situation, you can take a look below!

Turn on step-by-step reading mode. How it works:

Click the "Network" icon button, you can see the icon of each computer name (you will see it when you share it, but there are also cases where it is not displayed after sharing, so let's demonstrate how to find the computer sharing disk that is not displayed);

First of all, we need to know what the name of the shared computer is, right-click the "computer" icon on the desktop, and select "Properties";

At this point, you can see the name of the computer of the system (remember the name of the computer, you can also change it to a memorable name)!

Click "Start" - Run";

In the "Run" window, enter the name of the computer and click OK (such as "123");

Enter this computer to see the shared folder, the folder also has a shared symbol, click on one of the folders;

If the file is shared in the LAN, the main user provides access to the main user, and other computers can access the shared file on the host. Files, mainly on the computer, through the way of sharing, on the local area network to transfer files to each other. So how do you set up folder sharing?

Find the files that need to be shared in the file content, and store some file contents that need to be shared in the file content.

Then in the right-click folder, in the pop-up options box, select the option for Properties.

In the pop-up properties settings option, click on the "Share" option and then go through the settings after.

Once you've selected the sharing, click on the "Share" button option in the location where the network files and folders are shared.

In the file share, select the users you want to share with, and then select Medium users. Then tap on the option of "Share".

In network discovery and file sharing, for security purposes, select the "No, make the network you are connected to become a network for use" option.

In the Shared folder, and then within the file share, you can see the file path in each project.

Win7 system set up shared folders. Tools Ingredients: Huawei MateBook, Windows 7, Local Settings.

Recently, there are a lot of friends in private messages,Ask how to set up win7 shared folders,And it is specially to collect relevant information on the Internet,Learned,Summed up the most convenient win7 shared folder method,Now all put it in the following,You can operate step by step according to the detailed steps provided。

The specific steps are as follows:

First open the guest account, and then this step is more important than Mengzaohu, click on the network on the left, right-click "Properties";

Click on the location marked in the image "Change advanced sharing settings";

Double-click on the location in the red circle in the image, and a list will appear, find the content shown in the image below;

Click "Turn off password protected sharing" - "Save Modification" to finish;

Then select the disk partition or folder you want to share, and right-click "Properties" - "Sharing" - "Advanced Sharing".

Click "Share this folder" - "Permissions";

If not, click "Add" to add the user, and the permissions of the following everyone can be set as shown in the figure;

Click on "OK" under the "Security" tab to find it;

Click "";

Click "Add" to pay attention to this, generally there is no everyone user in it by default, you need to add it manually, and you can't share most of the problems here;

Click on "Advanced" in the image;

Click "Find Now", the following location will list the user, find everyone, double-click it;

Click OK;

Wait for the file to be added, click "OK", and then the win7 shared folder setting is basically completed.

The above is the method of how to share folders in win7 for everyone, I hope it can help you.

At work, we always like to create a folder in the computer, and then put things into this folder, and finally realize sharing, which can save us a lot of time, but how to share folders in win7? The following is an introduction to how to share folders in Windows 7, welcome to read!

01Open the Control Panel, go to the Network & Sharing Center, and click Change Advanced Sharing Settings on the left.

02 Look for password-protected sharing in the drop-down bar, and then select Turn off password-protected sharing.

03Then right-click on the file you want to share and select the specific user in the sharing.

04 Enter everyone in the add field, then click Add, and finally select everyone and click Share again.

Usually, when we use the LAN, we will share folders in order to facilitate the transfer of files, so that every win7 system computer in the LAN can use the shared content, which is very convenient. Do you know how Win7 sets up shared folders? If you don't know win7 friends, please learn how to share folders with win7.

Recommended:Pony activates win7 ultimate。

1. Check whether the sharing function is turned off

1. First of all, we open the "Control Panel" from the "Start Menu", and then open the "HomeGroup and Sharing Options" under "Network & Internet";

3. After opening the window, everyone can follow the settings of the following picture, mainly to open sharing. This virtual chain.

2. Printer sharing:

1. Let's come to "Control Panel - Hardware & Sound - Devices & Printers", then select the printer you want to share, right-click it and select "Printer Properties";

2. In the pop-up window, we switch to the "Share" tab, then check "Share this printer" and "Render print jobs on the client computer", and then click OK.

2. File sharing

1. First of all, we right-click on the file we want to share, and then open "Properties";

2. Then we switch to the "Share" tab and click "Share(s).."After that, add the users who need to be shared;

3. Then we will see the shared file of Sensun, and finally click Done.

The above is all the content of the win7 shared folder method,There is no clear win7 how to set up a shared friend can try the method,I hope it will help you。

First, select 1 folder (only shared folders, which includes the resources in the folder), right-click --> to select Share, and then follow the Share to select the specific user in the submenu, as shown in the image.

A new small window opens to display the file sharing interface, where you can add the user you want to share the file, here select everyone (that is, everyone can use the resources in this folder), click the add button after selection, then you can see that the selected user has been added in the following box.

Then you need to set the specific permissions of these users on file resources, generally it will be set to only read permissions, if it is set to read and write permissions, it is very likely that some users will copy and tamper with the original files to cause other users to be unable to use them normally.

After adding users and setting usage permissions, click the Share button at the bottom to refresh and display that the sharing settings are in progress.

Then you can see that the sharing settings are completed, and the interface gives a specific prompt and the location of the shared folder, which is to pay special attention to: when the computer is asleep, it is not possible to share files with other users.

How do I share folders across multiple computers? How to set up a shared folder or shared disk in Win7.

Right-click on the file you want to share In the Sharing & Security options Select Share File and set the permissions you require Set the IP address Connect the two computers through the router with a network cable Set the IP address So that the two computers are on the same network segment.

Send it directly to him. Or all share. He cancels the sharing when he doesn't use it.

1. First open the guest account, then this step is more important, click on the network on the left, right-click "Properties";

2. Click on the location marked in the picture "Change Advanced Sharing Settings";

3. Double-click the position in the red circle in the picture, and a list will appear;

4. Click "Turn off password protection sharing" - "Save and modify" to finish;

5. Then select the disk partition or folder you want to share, and right-click "Properties" - "Share" - "Advanced Sharing";

6. Next, "Permissions";

7. Click "Share this folder" - "Permissions";

8. Observe that there should be a user of everyone under the "group or user name" in the figure above, if not, click "Add" to add the user, and the permissions of everyone below can be set as shown in the figure;

9. Click "Add" to pay attention to this, generally there is no everyone user in it by default, you need to add it manually, and most of the problems are not shared here. Click on "Advanced";

10. Click "Find Now", the following location will list the user, find the Everyone user, double-click it and click OK;

11. Set permissions for everyone users as shown in the figure, click "OK" to appear in the following figure. When the file is added, click "OK", and the sharing settings are basically completed.