Is it necessary to make a ceiling for the design of no main lamp?

Of course not, after not making a ceiling, you can use PU lines to increase the sense of hierarchy.

Most of the non-main lights will be made to hang the flat ceiling of the whole house, but the owner does not want the modern minimalist effect, and considering the sacrifice of the floor height, budget and other factors, the final choice of surface-mounted lights instead of the ceiling. Add depth with line retouching.

on the choice of lights.

In the selection of lights, the wall illumination, the focus of the spotlight, the flood lighting of the selection of downlights.

Downlights are selected for the flood lighting above the sofa and the dining room, and all spotlights are used in other aisles, walls, and kitchens. The whole house is 3500k except for the kitchen. Personal experience 3500 is not yellow, there are individual sensory differences here, it is best to experience it yourself.

As for the choice of wattage of the lamp, the total wattage should be 2-3 times the area of the corresponding area, which makes people feel more comfortable.

The index is unconditionally 95 (or above), and the spotlight angle is 38 degrees for the whole house.

Personally, I think it's best not to pursue lighting effects too much, and choose the one that suits you is the best.

It is recommended that the owners who want to make a design without a main lamp should do the ceiling as much as possible, if they are afraid of depression, they can make the ceiling as high as possible, like putting a downlight under normal circumstances, and the ceiling can be at least 6-7 cm from the top surface, which is not much of a problem for the general house.

I thought I could offer some references!

The main cost of the design of no main lamp is composed of two lamps + ceiling, and for home decoration, if you do not do the design of no main lamp, you will generally do the ceiling, and the lamps and lanterns should also be bought.

Contrast on the lamp.

The lamps and lanterns without the main lamp design are mainly in the category of downlights and spotlights, so its lamps and lanterns have an upper limit, a lamp of more than 100 is the upper limit of the regular use of the people, of course, there is also a lower limit, after all, the number of spotlights with about 40 yuan will also be an expenditure, compared with the main lamp design, crystal square lamp, pure copper multi-head chandelier, this kind of thing is also the upper limit of ordinary decoration, the expenditure will be higher than the design of no main lamp, of course, if you buy a ceiling lamp for 50 yuan, it is indeed too cheap.

In the ceiling and other additional costs of the most comparison, the cost of the ceiling without the main lamp design is significantly higher than others, although there is no need for the ceiling with the existence of surface-mounted lamps, but there is still a gap in the lighting effect.

On the whole, if you plan to simply decorate and move in, then do a main lamp to finish the most money-saving, if there is a demand for the living environment and plan to live more comfortable, the expenditure of the design of the main lamp is lower than that of buying those more expensive headlights.

Clause. First, there is no main lamp, it is too expensive, the whole house ceiling, magnetic suction, track, deep cup anti-glare spotlights, that all require a lot of costs. It is a lot more expensive than ordinary ceiling lamps, so you should budget well in advance.

Clause. Second, there is no main lamp to do the whole house ceiling, because to pre-bury a lot of spotlights in the tube hole, if the height of the home is not high, really don't do no main lamp.

Clause. Third, the main lamp creates a sense of atmosphere, to consider the key lighting and atmosphere lighting, the lighting is bright, there is dark, if you like the chaos at home, it is really not recommended to do the main lamp, do you will not like it.

Clause. Fourth, ordinary users please professional lighting designers, it is difficult to make high-profile adjustments.

The design of the main lamp is to make the ceiling, and to buy a lot of lamps and lanterns, and the decoration cost will be much higher, which is the main reason why many people with insufficient decoration budget and low decoration effect requirements have been opposed to the main lamp. If you also feel that the benefits of the main lamp don't matter, it's not worth your money, then you don't need to look at the back one, just slide away.

Hello, dear, happy to answer your <>

Answer: no main lamp ceiling is a suspended draft rolling letter roof is better to use the suspended ceiling, because the suspended ceiling on the top surface with a variety of ceilings or metal plates or glass plates for decoration, the ceiling of the pattern of the special key wheel to accompany the don't, the type is particularly diverse, this kind of ceiling shape is peculiar and novel, the sense of movement is particularly strong, suitable for your living room is relatively large house. Whereas, the flat top plan, a very simple type of suspended ceiling, does not have any surface treatment and decoration.

Summary. Hello dear, your question: Is it better to have a suspended roof or a flat roof for a ceiling without a main light?

The answer is: Hello, for the choice of ceiling without main light, you need to decide whether to choose a suspended roof or a flat roof according to the actual situation. Generally speaking, if the height of the room is relatively low, it is more appropriate to choose a floating roof, because it can increase the height of the room and make the room look more spacious and bright.

If the height of the room is relatively high, it is more appropriate to choose a flat roof, because it can make the room look more stable and imposing, and it is also easier to clean and maintain. In addition, it is also necessary to take into account the style and decoration style of the room, and choose a ceiling without main lights that matches it. If it is a modern and simple style room, it is more appropriate to choose a simple and elegant flat roof; If you are in a European-style room, it is more appropriate to choose a gorgeous and delicate floating roof.

In short, the choice of a ceiling without a main light needs to consider the actual situation and personal preferences in order to achieve the best results.

Hello dear, your question: Is it better to have a suspended roof or a flat roof for a ceiling without a main light? The answer is:

Hello, for the choice of the ceiling without main light, you need to decide whether to choose a suspended roof or a flat roof according to the actual situation. Generally speaking, if the height of the room is relatively low, it is more appropriate to choose a suspended roof, because the suspended ceiling can increase the height of the room and make the room look more spacious and bright. If the height of the room is relatively high, it is more appropriate to choose a flat roof, because it can make the room look more stable and imposing, and it is also easier to clean and maintain.

In addition, it is also necessary to take into account the style and decoration style of the room, and choose a ceiling without main lights that matches it. If it is a modern and simple style room, it is more appropriate to choose a simple and elegant flat roof; If you are in a European-style room, it is more appropriate to choose a gorgeous and delicate floating roof. In short, the choice of no main lamp ceiling needs to consider the actual situation and personal preferences in order to achieve the best effect of flutter change.

Both have their own advantages, and there is no distinction between good and bad.

The reasons for not doing the ceiling without main lamp are as follows:

1. If you only rely on simple spotlights and other decorative lights, the brightness may not be enough, and it is easy to produce a feeling of dizziness for people's vision, and it is also very inconvenient for life.

2. High cost.

If you want to realize the design of the main lamp, it is inevitable to do a variety of shapes, which also requires the use of various materials, opaque, wood, acrylic and other others, are used, such as the ceiling, which was originally made into a straight line, and in order to highlight the effect, it will cost a lot more to make an arc, such as bricklayers, carpenters, painters and other cost problems.

3. The layer needs to be high.

The design of no main lamp is not better than the chandelier and ceiling lamp, which is a large lamp and lantern, it has higher requirements for the height of the floor, and the need to design the effect of no lamp means that the lamps need to be hidden, mainly through the ceiling, partition or partition and other shapes to shade and reflect, so that the light can reach the desired position and play the required role. This kind of space is too small, which will affect the overall space environment, and it is not recommended to use it.

Common fixtures in headlight-less designs:

Spotlights. Spotlights are typical ownerless lights, modern genre lighting of no fixed scale. The soft spotlight can create an indoor lighting atmosphere, can also be used for local lighting, and can also be freely combined to change the angle, and the lighting effect is ever-changing.

Downlight. The downlight is named because it resembles a barrel, and there are surface-mounted downlights and concealed downlights. The bottom of the concealed downlights is hidden by a suspended ceiling, revealing only a small point of light.

<> "Suspended Roof: The guide rail is more than 50 from the wall, 30cm, 50cm, and the guide rail is more than 50 from the wall.

Suspended roof + side ceiling lamp point map.

Suspended roof + side ceiling: guide rail 50 or more from the wall, 30cm, 30cm, guide rail from the wall 50 or more, 60cm or more 90-120cm -30cm

Suspended top + back type top lamp point map number pin cavity.

Suspended roof + back roof: the guide rail is more than 50, 50cm, 30cm, 60cm from the wall and 90-120cm -30cm

Point map of the retrograde ceiling lamp.

Bucket elimination ceiling: the guide rail is more than 50 from the wall, 30cm, 30cm, 60cm and more than 90-120cm -30cm

Strip light + back-shaped ceiling lamp point map.

Light strip + back ceiling: surface-mounted lamps are centered, more than 60cm 90-120cm -30cm

Point map of the side ceiling lamps.

Side ceiling: guide rail 50 or more from the wall, 30cm, 30cm, guide rail from the wall 50 or more, 60cm or more 90-120cm cm and 90-120cm

Strip light + side ceiling lamp point map.

Light strip + side ceiling: 30cm, 60cm or more 90-120cm -30cm

Share the dry goods of the ceiling without the main lamp, and teach you how to arrange the lights in the 8 kinds of ceilings.

1.Suspended roof.

2.Suspended ceiling.

3.Suspended top and back top.

4.Retrograde ceilings.

5.Light strip back ceiling.

6.side suspended ceilings.

7.Strip light side suspended ceiling.

8.Large flat top.

Point map of large flat-top lamps.

Large flat top: the guide rail is more than 70 from the wall, 30cm, 30cm, and the guide rail is more than 50 from the wall.

The construction method of the ceiling without main lamp is as follows:

Tools Materials: ink cartridges, electric drills, expansion screws, magnetic rails, keels, gypsum boards, anti-rust nails.

1. On the roof and the wall in front of the side Qiao, pop up the line of the size of the part of the ceiling that we need, as well as the edge line of the ceiling, and also pop up the line of Longxiao which clear the bone installation.

2. Use an electric drill to make holes on the roof and wall to install expansion bolts, and then use an electric drill to open the holes along the line we pop up.

3. Install the main keel and the secondary keel, the main keel is fixed on the top plate with expansion bolts, after the main keel is installed, the secondary keel is installed again, and the secondary keel and the main keel are fixed with connectors.

4. Install the magnetic suction track and fix it on the keel.

5. Install gypsum board, install large-surface gypsum board, use the whole board gypsum board, use an electric drill to penetrate the anti-rust nail into the gypsum board, and then fix it on the keel. The installation of local gypsum board, measure the accurate size, and then cut and cut the gypsum board, and then the cut finished gypsum board is also fixed to the keel with anti-rust nails, and the ceiling without main lamp is completed.

In the construction of a suspended ceiling without a main light, the following steps can be followed:

According to the actual needs and design requirements, determine the height of the ceiling, and use spirit level, measuring tape and other tools to accurately measure and mark.

According to the size and layout of the ceiling, install the ceiling keel. Fix the keel to the ceiling, making sure it is level and maintaining proper spacing, usually 60 cm to 80 cm.

The ceiling panels are installed on the keel according to the design requirements and layout. Use screws to fix the ceiling plate on the keel to ensure firm stability.

According to the design needs, the wires are passed through the gap between the keel and the ceiling plate, and the random pins are connected to each lamp position.

Finally, the locust is turned on and tested whether it is powered on.