What does the P, R, N, D stand for in an automatic transmission car?

The meaning of automatic transmission gear P, R, N, D, L:

1. P is the parking gear (parking), after the car stops, the vehicle is braked to prevent movement, and the N gear is different from the P gear to interrupt the power output. At present, some models will independently go out of the P gear, called electronic braking, and the principle is the same.

2. R is the reverse gear, and the gear can only be hung when the vehicle stops. Models with a lock button also need to press the button to switch.

3. N is neutral, temporarily stop and hang into the gear, stop the movement of the vehicle, and the power is not interrupted. For example, when waiting for a traffic light, the handbrake should be pulled up at the same time, and this gear should be disabled when going downhill.

4. D is the forward gear (drive), the most commonly used gear, which can be completed by throttle control when you need to raise or lower gears. D1 (or L), D2, and D3 are equivalent to 1 and 6 of manual gears.

5. L is the low-speed gear (Low), when the vehicle goes downhill, the low-speed gear is hooked to reduce braking; When the vehicle is going uphill, it will be more powerful to climb the hill when it is engaged in a low gear.

Automatic gears P, R, D, N indicate:1. P gear is actually a parking gear, when the car stops, after hanging on the P gear, the vehicle will brake to prevent the vehicle from moving.

2. R gear is the reverse gear, when the vehicle needs to reverse, it can be hung into the R gear.

3. D gear is the forward gear, and it is also the most commonly used gear for our car owners, such as D1, D2, and D3 gears, which are equivalent to the 1st and 6th gears of the manual gear.

4. N gear is the meaning of neutral, which is the gear that is hung when the vehicle needs to be temporarily stopped, for example, when waiting for the traffic light, you can hang neutral, but at the same time, you also need to pull up the handbrake.

First of all, it is the most used D gear, "driving gear" can also be called "forward gear", is the abbreviation of the English word "drive", when the automatic transmission model is hung into the D gear, the computer will automatically select the appropriate gear for driving.

Located above the D gear, the N gear is the abbreviation of the English word "neutral", which means "neutral", at this time the clutch is separated from the engine, we all know that there is a neutral slide in the manual transmission model to save fuel, however, for automatic transmission models, many old drivers still do not recommend everyone to operate this way!

Further up is the R gear, R is the abbreviation of the word Reverse, the gear is also commonly used by everyone "reverse gear".

Located at the top of the P gear, which is what we often call "parking gear" or "parking gear", when the vehicle is hooked into the P gear, the wheels of the car are in a mechanical locking state to prevent slipping, of course, even if it is hung into the P gear after parking, don't forget to pull the handbrake!

In addition, there are S gear and L gear on many vehicles, which are actually the abbreviations of Sport and Low Speed respectively, the former mostly appears in sedans, generally known as sports gear, when the vehicle is hooked into the S gear, the system will delay the shift time, pull up the speed before shifting, make full use of engine torque, improve vehicle response performance, and obtain better acceleration.

The L gear is obviously a low-speed gear, which generally appears more on off-road vehicles, mostly used when going downhill or on a long-distance slope, which can limit the gear of the car automatically only in the lowest gear, so that the car uses engine power to brake when going downhill, and the driver does not need to step on the brakes for a long time to cause the brake pads to overheat and be dangerous.

The meaning of P, R, N, D, S in automatic transmission car is as follows:

The P gear means parking, which stands for parking gear. It can be used when the parking time is relatively long, and it can only be used when parking for safety, and it must not be used in the process of driving.

R gear means reverse and stands for reverse gear. It is worth noting that it is not possible to put the reverse gear when the parking space is parked.

The meaning of n gear is neutral, which represents neutral gear. However, unlike manual transmissions, automatic transmissions can be used for short stops of less than 3 minutes.

D gear means drive, which stands for forward gear. As the name suggests, it is used when driving, and the car can move forward when it is hung in D gear.

The S gear means Sport, which stands for Sport. It is generally used when accelerating, overtaking quickly and climbing, and the car in this gear generates more power and consumes more fuel.

Advantages of automatic transmission cars

The biggest advantage of automatic transmission vehicles is convenience, especially in traffic jams, especially when encountering traffic jams and large uphill slopes, the advantages of automatic transmission are more obvious. Now automatic transmission cars are becoming more and more popular, from the perspective of advanced countries in the development of automobiles, most of the vehicles have transitioned to automatic transmission, and automatic transmission replaces hand transmission to become the main model of daily driving is the trend of automobile development.

Summary. Dear, I am glad to answer for you: the meaning of each gear of the automatic transmission car: P, R, N, D, S:

1. P is the parking gear: after the car stops off, the car will be hung into the P gear. 2. R is the reverse gear:

When the car is reversing, put the gear lever into R gear, and the car will drive backwards, which is the same as the manual R gear. 3. N is neutral: the automatic transmission car has N gear, while the manual transmission does not have N gear marking, in fact, N gear is equivalent to the neutral gear of manual transmission.

The car is engaged in N gear, the engine of the car is disengaged from the gearbox, and the power transmission is interrupted. 4. D is the forward gear: after the automatic transmission car is hung into the D gear, after letting go of the handbrake and foot brake, the car will drive forward, while the manual transmission car actually needs to be hung into the first gear to realize the function of driving forward.

5. S is the sports mode: some automatic transmission cars will have a sports mode (S gear), and the normal driving mode, the sports mode is more fuel-efficient and more powerful. Therefore, when the RI needs to exceed the speed limit for medium and high-speed driving, it can be put into S gear, and I believe that there will be unexpected effects.

What does the P, R, N, D, S mean in an automatic transmission car.

Dear, I'm glad to answer for you: the meaning of each gear of the automatic transmission car: 1. P is the parking gear:

When the car stops after the engine is turned off, the car will be put into P gear. 2. R is reverse gear: when the car is reversing, put the gear lever into the R gear, and the car will drive backwards, which is consistent with the manual R gear.

3. N is neutral: the automatic transmission car has N gear, while the manual transmission does not have N gear marking, in fact, N gear is equivalent to the neutral gear of manual transmission. The car is engaged in N gear, the engine of the car is disengaged from the gearbox, and the power transmission is interrupted.

4. D is the forward gear: after the automatic transmission car is hung into the D gear, after letting go of the handbrake and foot brake, the car will drive forward, while the manual transmission car actually needs to be hung into the first gear to realize the function of driving forward. 5. S is the mode of amusing filial piety:

Some automatic transmission cars will have a sport mode (S gear), and a normal driving mode, which is more fuel-efficient and more powerful. Therefore, when you need to speed at medium and high speeds, you can put it into S gear, and I believe there will be unexpected effects. [Big Red Shenchang Flower].

Automatic transmission, as the name suggests, does not require the driver to manually change gears, and the vehicle will automatically select the appropriate gear according to the speed and traffic conditions. There are six gears on a general automatic transmission car, from top to bottom: P, R, N, D, S, and L.

The car that drives the automatic transmission only uses the parking gear P gear, the reverse gear R gear, the neutral N gear, and the forward gear D gear can fully meet the needs of general driving, and if you encounter some special driving rings, you need to use other functions to transport the spine. Therefore, if you are able to choose the right way to handle and control, an automatic car will perform better than a manual one. <>

What does the P, R, N, D, S mean in an automatic transmission car.

Hello dear, <>

We'll be happy to answer for you. The P, R, N, D, and S of an automatic transmission car are several automatic transmission gears of the car: P (Park) gear:

Parking gear, used when stopping for an extended period of time or on a ramp, when the transmission output shaft is locked and the wheels are locked by the brakes. R (reverse) gear: reverse gear, suitable for reversing or slow moving, when the transmission output shaft is in the opposite direction of rotation to the wheel.

N (neutral): Neutral, used for short stops, such as when waiting for a red light, when the engine is still running, but the wheels and transmission output shaft are free. D (Drive) gear:

Forward gear, which is used when the vehicle is in motion, when the transmission automatically selects the most suitable gear according to the vehicle speed and engine speed. S (Sport): Sport gear, generally used at high speeds or at high speeds, when the transmission delays the shift time and increases the engine speed to provide a stronger power output.

It should be noted that in automatic transmission cars, there is a "Noga O D Off" button between P and R gears, which is used to turn off the overdrive of the automatic transmission in order to accelerate or decelerate faster. However, this button only works at low speeds, and it is not possible to turn off the overdrive gear at high speeds. Hope it helps.

Thank you very much! <>

P is the parking gear of the automatic transmission car, R is the gear used for reversing, N is neutral, D is the forward gear, using these gears only needs to start the vehicle, keep the vehicle stationary can be hung up, and then step on the accelerator pedal to drive, the specific operation steps are as follows:

1. Press the brake pedal of the automatic transmission car.

2. Press the one-button start button of the automatic transmission car.

3. The instrument of the automatic transmission car lights up and the vehicle starts.

4. Place the automatic gear lever of the automatic transmission car in the desired position.

5. Press the accelerator and the vehicle will automatically skip gears.

p-parking, which stands for parking gear.

When you reach your destination, hang the gear in the P gear position when you stop the engine, and the wheels and gearbox are locked at this time, which can prevent the slope from slipping.

r-reverse stands for reverse gear.

There's not much to say about this gear, just put it in R gear when you need to reverse. When playing in reverse gear, pay attention to stabilizing the speed of the car first, and never suddenly hang in reverse gear when accelerating straight.

n-neutrial, which represents a vacancy.

Gear can be hung in N gear for short stops, such as when waiting for a red light. Of course, you need to press the brakes at this time, otherwise there is a risk of slippage.

D-drive, which is the most used forward gear.

As the name suggests, when driving forward, you can put in D gear and then step on the accelerator.

N-gear, commonly known as neutral in manual transmission models, can be used in automatic transmission vehicles when stopping for a short time, such as waiting for a red light.

R gear is a reverse gear, and the R gear is hung when reversing, which should be known to the driver. One thing to note is that the car can only be put into R gear when it is fully stopped and the foot brakes are applied.

S gear is the sport mode, S gear is the same as D gear is the forward gear, but the S gear is more powerful, which can make the driver feel the fun of acceleration.

D gear, that is, the forward gear, to let the car move forward, then hang into N gear and press the accelerator. Nowadays, many gearboxes are manual and self-integrated, and after being put into D gear and then pushed to the right, the vehicle enters manual shift mode, and the driver can control the forward acceleration gear.

The car does not need to change gears in the driving is called automatic transmission, automatic transmission includes: P gear - parking gear, long-term parking gear, that is, the gear when the engine is turned off and parking, parking on flat ground, hitting the P gear can also be played without pulling the handbrake. R gear – reverse gear.

N gear - neutral, can also be called short-term parking gear, when the car is not turned off and parked (waiting for people or waiting for red lights), hitting the n gear is good for the car's clutch, pull on the handbrake foot does not need to step on the brake plate for a long time. D gear - forward gear, a total of four gears.

The meaning of the letter of the automatic gear of the car is as follows:1. P is the parking gear, when the owner stops without gear, the wheels are in a mechanical locking state, which can prevent slipping.

2. R is the reverse gear, which is used when reversing.

3. N is neutral, and this gear is used when temporarily parking.

4. D is the forward gear, also known as the drive gear, and this gear is used when advancing. The automatic transmission car is controlled by the computer according to the size of the throttle, the speed of the vehicle, and the opening of the throttle, and the hydraulic oil pushes the piston to shift, and automatically selects the appropriate gear according to the speed and traffic conditions of the car, and can control the gear independently, so that the engine speed and the gear are more matched.

P is the parking gear of the automatic transmission car, R is the gear used for reversing, N is neutral, D is the forward gear, using these gears only needs to start the vehicle, keep the vehicle stationary can be hung up, and then step on the accelerator pedal to drive, the specific operation steps are as follows:

1. Press the brake pedal of the automatic transmission car.

2. Press the one-button start button of the automatic transmission car.

3. The instrument of the automatic transmission car lights up and the vehicle starts.

4. Place the automatic gear lever of the automatic transmission car in the desired position.

5. Press the accelerator and the vehicle will automatically skip gears.