Can the wooden cabinet long worm be solved by varnish?

The varnish can prevent moths, but there are already insects that need to be found in another way.

Usually put some sanitary balls in wooden furniture.

Or mothball, not only can prevent the phenomenon of clothes being eaten by insects, but also can be cut into small sticks and stuffed into the cavities, and putty.

Sealing, which can kill moths in the hole.

It is also possible to use pesticides for insect control: when the wooden cabinet is infested with insects, dichlorvos can be used.

and water in the ratio of 1 5 to prepare the liquid medicine, with a sprayer to spray comprehensively, so that the liquid medicine infiltrates into the wooden cabinet, to spray 3 times 5 times in a row, after 8 hours, can kill all the moths. After that, wash the wooden cabinet with clean water and dry it.

In addition to the insecticidal agent, add a small amount of camphor wood board to the wardrobe, which can play a role in preventing moths, do not use camphor wood on the entire back panel, the smell is too great, and it may cause physical discomfort. Just make one or two partitions. The extra small camphor strips or boards, troublesome carpenters nail to the inside of the top of the wardrobe.

First, take out the items in the wooden table of the long worm and clean it up, and put it in the sun to dry if it can't be cleaned; It should be wiped several times with disinfectant, and thoroughly ventilated and dried after wiping; For wooden tables that have been infested by moths or termites, a small amount of insecticide solution (dichlorvos) can be dropped into the moth-eaten holes, or sharp chili peppers or peppercorns can be mashed into foam and stuffed into the moth-eaten holes. Apply paraffin oil to the insect infested area for 10 days. However, it is important to remember that no pesticides and paraffin oil can be used in tableware such as cabinets.

If possible, after buying a new table, it is best to apply varnish to the surface of the unpainted wood board inside the table, which will not only enhance the aesthetics, but also prevent insects. Spray insect repellent water as much as possible after decoration or after, and make sure that the pure wood table you buy is treated with insect repellent treatment. Paint treatment.

For some corners that have not been damaged, paint the surface of the wooden table with raw tung oil, shellac paint or varnish to isolate the moth from the air and achieve the purpose of preventing moths. It should be noted that when painting, the front and back sides and the inner wall of the wooden table should be painted evenly. Pharmaceutical treatment.

When the wooden table is infested by insects, dichlorvos and water can be used in a ratio of 1 5 to prepare the liquid, spray it with a sprayer, let the liquid infiltrate into the wooden table, spray 3-5 times continuously, after 8 hours, it can kill all the moths. After that, the wooden table is washed and dried with clean water. Rub with diesel.

On a sunny day, place the wooden table that has been eaten by insects in the morning and paint the wooden table with a brush or cotton yarn dipped in diesel oil. Dry for two or three hours and then apply it once, and then dry it again, until you see the moth dead at the mouth of the hole. Then wash with laundry detergent and dry.

Can plywood moths in the wardrobe be solved by varnish.

Dichlorvos diesel is simply not available.

Plank beds can be insecticidal in the following ways:

1. Put the plank bed in the scorching sun, generally insects like a humid environment, under the scorching sun, you can drive away or even kill insects. After sunbathing, you can place a number of mothballs under the plank bed to prevent insects.

2. Use paint to paint the wooden board to isolate the air, and the insects will die. This method is easy to partially isolate the air incompletely, the sealing degree is not high, you need to pay attention to the oil paint, and the paint smell is difficult to eliminate.

3. Use pesticides. Find the moth-eaten area, clean the wood powder, spray it with insecticide for a few days, then wash it and dry it in the sun.

4. Fumigate the wooden board with insect medicine to remove insects, clean it after insect removal, and then dry it.

5. The above two or more methods can be combined, and the insecticidal and insecticidal effect will be better.