What to do if the oak cabinet is moldy, what to do if the solid wood cabinet is moldy

Whether it's a wooden cabinet or a wall surface painted with latex paint, the appearance of mold is basically caused by moisture. When the wooden board is damp and moldy, its color is black; When the surface of the latex paint wall is moldy, you can also see the blackening, and there are also problems such as the putty layer peeling and falling off. After the wood board is blackened, it is not possible to solve the problem by simply wiping it.

If the problem of dampness can be solved in time, then it can be covered with blending paint on the inside of the cabinet; If the dampness problem is not solved, this mold situation will not be avoidable.

If it is a large area, it is recommended that you use a professional mold remover, which can be completely eliminated in a short time. If it's only a small part, please see if the water pipe is leaking, fix it, and then clean up the mold and put some desiccant.

It depends on whether the cabinet is close to the toilet or bathroom, if it is close to these two places, it depends on whether there is water seepage on the wall, the cabinet mold can be gently wiped with a little water with dish soap with a rag, do not get the furniture paint, and then put it in a ventilated place to dry it, the main thing is to find the cause of mold, it is best to open the window often to keep the indoor air circulation.

After the solid wood cabinet is moldy, you need to adjust the cabinet to a position that can avoid direct sunlight and away from water sources in time, remove the mold with a rag, and then apply a layer of wax oil on it to prevent the residual mold from coming into contact with the air. Usually, you need to put some desiccant to reduce the humidity of indoor air and pay attention to indoor and outdoor ventilation.

1. Placement

After the solid wood cabinet is moldy, the cabinet should be moved to a place that can avoid direct sunlight and is far away from the water source such as toilet, bathroom, kitchen, etc., so as to avoid the expansion of wood caused by sunlight accelerating the oxidation of the cabinet and the high humidity of the air.

2. Remove mildew

After the cabinet is moldy, it is necessary to clean the mold on it in time. You can use a rag dipped in detergent to repeatedly wipe the moldy parts of the cabinet until the mold on the cabinet is completely removed.

3. Waxing care

After cleaning off the mold on the cabinet, it is best to use wax oil to protect the cabinet, dip the wax oil with a brush, and evenly apply it to the moldy parts of the cabinet to avoid the mold spots growing again.

4. Daily moisture-proof

Usually, it is also necessary to open the window frequently for ventilation to accelerate the volatilization of indoor moisture, and put some desiccant in the room and cabinets or other furniture to reduce the humidity in the air to effectively avoid mold.

You can put some desiccant or mothballs in the cabinet to keep it dry and absorb excess water, then wipe off the mold with a cloth and repaint it, which is for the cabinet if it is only slightly moldy. When the cabinet is very moldy, it is necessary to remove the mold with sandpaper first, then clean it with detergent and spray it with anti-mold agent, and also paint it again. You can also find a carton at home and put quicklime in an inconspicuous place in the room, which can be both damp and disinfected; In addition, in the cabinet, you can install a 5-8 watt ordinary tungsten light bulb, turn it on at night or during very humid periods, and keep the humidity in the space at 30% or below.

The reason for the moldy cabinet is that the moldy cabinet is mostly due to the humid surrounding environment, so in ordinary life, pay attention to open the window for ventilation, keep the surrounding environment dry, and do not use a humidifier in the house. You can also put moisture-proof materials on the wall, and if the wall is too wet, you can also move the cabinet to a lower position. If the cabinet is moldy, it may also be the reason for the cabinet itself, the wood has not been completely dried when it is made into a cabinet, but a layer of film is pasted on the surface, and the wood is moldy in the process of air drying, so when buying cabinets, we should pay attention to identification and selection, and fundamentally ensure that the cabinet is not easily moldy.

1. When we see the moldy wooden cabinet, we should first pay attention to clean the moldy place, generally wipe it clean with a dry paper towel, or brush it with a dry brush to clean the moldy place. If you can't clean it up, you can wipe it vigorously with a damp cloth, which can often be very convenient to remove mildew.

2. If mold is found, in addition to wiping the mold with a cloth, we also need to brush the varnish on it again, so as to effectively prevent mold from growing again. Most of the mold is caused by paint problems, so we can also use the rainforest to clean it and then wipe it with a clean cloth.

3. The air is humid and easy to mold, so we can put some quicklime at home, which can not only effectively prevent moisture, but also have the effect of disinfection. If there is too much moisture in the wooden cabinet, spread some dry newspaper, desiccant, or mothballs on the bottom of the cabinet to absorb some moisture.

4. After mold enters our home, it will cause some respiratory diseases, in order to prevent this, you can put some desiccant in the wooden cabinet, which can absorb the excess water in the wooden cabinet and make the wooden cabinet drier. At the same time, we can put some orange peel in the wooden cabinet, which can also play a refreshing and environmentally friendly effect, and at the same time pay attention to the frequent opening of the window for ventilation, and try not to use a humidifier indoors to prevent excessive moisture and affect the use of wooden cabinets.

Demoulding method:1. Open the wardrobe, clean out all the clothes, and clean the wardrobe of mold spots (with a dry brush, not dipped in water, or carefully wiped with toilet paper).

2。Keep your wardrobe ventilated. At this time, the clothes should be sorted out, and the moldy clothes must be washed again.

Then all the clothes are thoroughly dried, preferably in the sun for 2 hours after drying. If the weather is humid, you can use a hair dryer to dry it (do not use a high temperature setting, the temperature should not exceed 50 degrees, blow to a place about a meter away from the clothes, and pay attention to the dead corners of the clothes, such as pockets and pockets).

3。Spread some dry newspaper at the bottom of the cabinet to absorb some moisture. Then put the clothes away, the cloakroom is not too wide or too crowded.

4。Finally, use a hair dryer to call Zhidan to ventilate the entire wardrobe for 2 minutes. Close the closet.

5。Pay attention to the weather. If it's wet, take time to bask in the sun or ventilate.

P.S. A simple way to check if the house is damp and disturbed.

Use a roll of toilet paper (the kind with a paper core) and place it near the cabinet. If one day you find that the paper has become loose (that is, there is a large gap between the paper and the core, and it has become soft and not tight, it means that the house is damp, and you should pay attention to mildew-proof).

We all know that the place where clothes are generally placed at home is a wooden cabinet, so why use a wooden cabinet to put clothes? First of all, the overall appearance of the wooden cabinet is relatively atmospheric and simple, and secondly, there are no additives, so the wooden cabinet is pollution-free, environmentally friendly, and you can rest assured that you can use it, and finally the wooden cabinet has the characteristics of durability and durability. However, wooden cabinets also have disadvantages, that is, they are prone to mold in places with high humidity, just like the wardrobe on the wall near the toilet is particularly prone to mold.

What is the cause of mold in wooden cabinets? What are the solutions to the moldy wooden cabinet?

Causes of mold in wooden cabinets.

1. The environment of the space is too bad: the lighting and ventilation conditions are too poor, and the wet garbage is not cleaned up in time.

2. The quality of the plate is too poor: the waterproof performance of the cabinet making material is not good.

3. Human reasons in the process of cabinet production: the manufacturer is shoddy in the production of cabinets.

4. The occupants' own reasons: do not pay attention to the ventilation and drying of the cabinets.

Wooden cabinet mold solution:

1. Open the wardrobe, clean out all the clothes, clean the mold on the wardrobe, wipe it with a dry paper towel, or brush it with a brush and wipe it with a dry paper towel. If you still can't get rid of the mold, just wipe it vigorously with a damp paper towel or towel.

2. Keep the wardrobe ventilated. Organize your clothes at this time, and wash your moldy clothes again. Then cool dry all the laundry thoroughly, preferably in the sun for 2 hours.

If the weather is more humid, you can use an electric hair dryer to blow it (if you don't know Chunshan, you should use a medium and high temperature gear, the temperature should not exceed 50 degrees, blow about a meter away from the clothes, and pay attention to the dead corners of the clothes, such as nests, pockets and other parts).

3. Spread some dry newspapers at the bottom of the cabinet to absorb some moisture. Then place the laundry so that the laundry room is not too crowded.

4. Finally, use a hair dryer to ventilate the entire wardrobe for 2 minutes. Close the closet.

5. Pay attention to frequent windows for ventilation. Do not use a humidifier inside the house. After mopping the floor, pay attention to open the window or turn on the fan and air conditioner to dry the water in time. Also, putting some orange peel in your wardrobe works well.

6. In the closet, install a 5-8 watt ordinary tungsten light bulb and turn it on at night or during very humid periods, this method has been proven to be effective, and can keep the humidity in the space at 30% or below.

The above is the cause and solution of the wooden cabinet moldy introduced by the rabbit, the wooden cabinet moldy friends do not be depressed, read the rabbit wrote, hurry back and try it, do not try not to know, try to be scared, try to know whether the effect is good or not. Since there are ways to solve the mold of wooden cabinets, how can we prevent mold from wooden cabinets? The rabbit's suggestion is to be sure to open the window to ventilate frequently, blow away the moisture in the wooden cabinet, and if it is a wooden cabinet close to the wall of the bathroom, it must be waterproofed, put some desiccant, etc.

You can get it for free