Can mirror stainless steel elevator scratches be repaired?

Updated on home 2024-08-12
13 answers
  1. Anonymous users2024-02-16

    It is understood that the situation of mirror stainless steel scratches is generally these: first, the plate is scratched before processing, but it is not obvious. Therefore, it is necessary to judge the severity of the scratch.

    If the scratch area and scratch depth exceed the customer's acceptance of the final product effect, the plate that meets the requirements should be replaced, i.e. it is very important for the processing operator to check.

    The second is that the plate has been mirror-treated, but in the process of film processing, do not be careful to scratch. There are many types of scratches, such as point scratches, straight line scratches, and large area scratches. After more than two times of TIG welding, the use of TIG welding machine can solve this problem.

    What should I do if there are scratches on the stainless steel mirror? If you want to repair a shiny surface, you can use the polishing method, and the polishing wheel can be repeated for different meshes. Generally, sandblasting is used to repair a matte surface, which requires special equipment.

    If the drawing panel was made at an early stage, special equipment handling is also required. Regardless of the method, the surface must be passivated at the end. If it is a mirror surface, polish the surface of the stainless steel plate with polishing wax.

    In the case of wire drawing, use a wire drawing machine to draw the stainless steel surface.

    Then there's a linear scratch, which we call a scratch. It is relatively difficult to deal with scratches. The problem of shallow scratches can be solved by the above methods (reducing the feed roll speed and reducing the grinding head). Deep scratches are not easy to deal with.

    In addition, when talking about large-scale scratches and scratches, there are also two types of scratch depths, and the treatment method is the same as the above method.

    If it's the second type of scratch, it's even harder. Because this secondary scratch should be avoided. It is recommended to reduce or avoid the possibility of scratches on stainless steel mirrors by the following methods:

    Paste a protective film on the surface of the board, pack the board with a wooden frame, fill the board with cardboard or plastic board on the top and bottom of the board, package the whole piece with waterproof paper, and mark the words "protect the board surface and not scratch" on the board or packaging surface. If there are scratches on the finished mirror stainless steel plate, it can be basically completed according to the above method. If it is a semi-finished equipment that scratches the surface on the mirror, a variety of polishing equipment should be used; For example, a hand-held polisher can be used instead of multiple polishing wheels to achieve better results.

  2. Anonymous users2024-02-15

    No. Mechanical scratches on the metal surface can only be eliminated by surface treatment in its entirety.

  3. Anonymous users2024-02-14

    Glossy repair: Use different polishing wheels to grind multiple times.

    Dip some alcohol in a paper towel (with industrial alcohol.

    If you don't need to use a medical one, you can also make do with it) wipe, and then rub the stainless steel elevator door sleeve line maintenance film a few times to be clean, and you can also use nail polish remover, and the usage is also the same as alcohol acetone.

    The same. The effect is also very good. Nail polish remover does not ask for quality, good or ordinary will do, as long as it can wash off the nail polish.

    All of them can.

    Precautions for using stainless steel elevators.

    It is necessary to pay attention to the fact that no surface scratches occur when cleaning the stainless steel surface, avoid using bleaching ingredients and abrasive lotions, steel wool balls, grinding tools, etc., and rinse the surface with clean water at the end of washing in order to remove the washing liquid.

    Grease, oil, lubricating oil contamination on the surface of stainless steel should be wiped clean with a soft cloth, followed by a neutral detergent or ammonia solution.

    Or wash with a special detergent. Stainless steel has bleach on the surface.

    As well as various acids attached, immediately rinse with water, and then use ammonia solution or neutral carbonated soda.

    Immerse in the solution and wash with a neutral detergent or warm water.

    The above content refers to Encyclopedia - Elevator.

    Encyclopedia - Stainless steel surface treatment.

  4. Anonymous users2024-02-13

    Elevator stainless steel mirror cleaning and maintenance, need to use a special fiber towel to wipe the elevator stainless steel mirror, the specific operation steps are as follows:

    1. Prepare a special stainless steel fiber towel.

    2. Wipe the stainless steel handle of the elevator.

    3. Wipe the top of the elevator stainless steel.

    4. Wipe the bottom of the stainless steel of the elevator.

    5. The entire elevator stainless steel is cleaned.

    6. Wax maintenance after cleaning.

  5. Anonymous users2024-02-12

    This depends on which one it is, there are generally two kinds, one is the glossy surface (like a mirror), and the other is the brushed surface. It is recommended to clean the smooth surface with a neutral multi-functional detergent, wet first and then dry, with a cotton soft rag; The brushed surface has to be maintained with stainless steel brightener, which can be bought in general hotel supply stores, 5L large barrels, and the stainless steel is thoroughly cleaned with neutral detergent when used, so that there can be no water stains or stains, and then sprayed with stainless steel brightener, and polished with a pure cotton soft cloth.

  6. Anonymous users2024-02-11

    Dear, I am a professional answerer, the platform is arranging a professional manual answerer for you, due to the large number of people is now queuing for you, there are 3 people in front, it is expected to wait for 5 minutes, please wait a little longer

    Method 1: Wipe the surface of the stainless steel elevator door from top to bottom with a cleaning cloth and diluted stain water, and then use a towel to thoroughly wipe off the water droplets on the stainless steel surface. Method 2:

    You can use a hand spray gun to spray cleaning water on the surface of the stainless steel elevator door and wipe it clean with a lint-free towel. Finally, spray a little stainless steel protective oil solution on the towel and wipe the stainless steel surface from top to bottom. If the stainless steel surface is mirrored, it is forbidden to use stainless steel oil, and water or detergent is sufficient.

    1. What are the precautions for cleaning stainless steel elevator doors? 1. When cleaning the surface of stainless steel, attention must be paid not to scratch the surface, avoid using bleaching ingredients and abrasive lotions, steel wool balls, grinding tools, etc., in order to remove the washing liquid, rinse the surface with clean water at the end of washing. 2. If there is dust on the surface of stainless steel and dirt that is easy to remove, it can be washed with soap, weak detergent or warm water.

    3. The trademark and film on the surface of stainless steel should be washed with warm water and weak detergent, and the binder ingredients should be scrubbed with alcohol or organic solvents (ether and benzene). 4. If the grease, oil and lubricating oil on the surface of stainless steel are polluted, wipe it clean with a soft cloth, and then clean it with neutral detergent or ammonia solution or with special detergent. 5. If there is bleach and various acids attached to the surface of stainless steel, rinse it with water immediately, then soak it with ammonia solution or neutral carbonated soda solution, and wash it with neutral detergent or warm water.

    6. There are rainbow patterns on the surface of stainless steel, which is caused by excessive use of detergent or oil, which can be washed off with warm water neutral detergent. 7. The rust caused by the dirt on the surface of stainless steel can be washed with 10% nitric acid or abrasive detergent, and can also be washed with special detergents.

    Dear, please refer to it

  7. Anonymous users2024-02-10

    How to clean mirror stainless steel.

    1. The dust can be removed by using alcohol or the liquid after the miscible water and alcohol, and the dirt that is not easy to remove can be washed with soap;

    2. Grease, oil and lubricating oil pollution on the surface of stainless steel should be wiped clean with a soft cloth, and then cleaned with neutral detergent or ammonia solution or special detergent, if there is bleach and various acids attached, rinse with water immediately, and then soak with ammonia solution or neutral carbonated soda solution, wash with neutral detergent or warm water;

    3. The cloth used should be soft, not faded or fluffy, and the surface of stainless steel should not be wiped with sharp or rough objects, and the surface of stainless steel should be easily scratched.

  8. Anonymous users2024-02-09

    Wipe with a soft cotton cloth.

    If there is any stain, you can wash it with a cloth dipped in a neutral detergent.

    You can apply a small amount of motor oil to the surface (a small amount of handprints left by a child's hand can be done) to eliminate the traces of touch or wipe.

  9. Anonymous users2024-02-08

    Summary. Hello, there are three repair methods, one is mechanical polishing, the use of cutting, grinding, so that the convex part of the stainless steel surface to fill in the recess and become smooth. The second is chemical polishing, so that the surface of stainless steel can achieve a bright and smooth effect by dissolving.

    The third is electrochemical polishing, which uses direct current to dissolve scratches on the surface of stainless steel to achieve a mirror effect and make it brighter.

    Hello, there are three repair methods, one is mechanical polishing, the use of cutting, grinding, so that the convex part of the stainless steel surface to fill in the recess and become smooth. The second is chemical polishing, so that the surface of stainless steel can achieve a bright and smooth effect by dissolving. The third is electrochemical polishing, which uses direct current to dissolve scratches on the surface of stainless steel to achieve a mirror effect and make it brighter.

    Approximate how much it will cost.

    The cost depends on whether the polishing is chemical or mechanical. **500-3000

  10. Anonymous users2024-02-07

    Elevator stainless steel mirror cleaning and maintenance, need to use a special fiber towel to wipe the elevator stainless steel mirror, the specific operation steps are as follows:

    1. Prepare a special stainless steel fiber towel.

    2. Wipe the stainless steel handle of the elevator.

    3. Wipe the top of the elevator stainless steel.

    4. Wipe the bottom of the stainless steel of the elevator.

    5. The entire elevator stainless steel is cleaned and maintained.

  11. Anonymous users2024-02-06

    The scratch repair method of the elevator stainless steel surface is as follows

    1.Abrasives are used for grinding and sanding, followed by polishing;

    2.Use steel wool balls and steel brushes for cleaning and polishing;

    3.Fiberglass and sandpaper are used for grinding and sanding, and polishing is carried out after the celebration;

    4.Coating with chromizing agent for surface repair;

    5.Grinding, polishing and repair with stainless steel polishes;

    6.Stainless steel partial replacement is carried out according to the depth of the scratch.

    Before proceeding with the above methods of tuba restoration, the extent and depth of the scratches need to be carefully assessed and determined to choose the most appropriate method. At the same time, safety should be paid attention to during the repair process to avoid causing harm to surrounding items and people.

  12. Anonymous users2024-02-05

    Summary. Hello, dear, I'm glad to answer for you: elevator mirror stainless steel scratch repair method:

    1.Polishing: If it is a stainless steel material for the mirror panel, you can use a wool wheel + polishing wax to polish; Re-repair of stainless steel surface, 2

    Drawing: The stainless steel material of the drawing plate can be directly drawn with a brushed cloth; This repairs scratches on the stainless steel surface of the brushed sheet. 3.

    Passivation: After the stainless steel is scratched, the surface passivation film is affected, and the surface treatment can be repaired with weld pickling passivation technology. 4.

    Sandblasting: If it is a matte stainless steel material, you can use the sandblasting method to repair scratches.

    Hello, dear, I am glad to answer for you: elevator mirror stainless steel scratch repair method: 1

    Polishing: If it is a stainless steel material for the mirror panel, you can use a wool wheel + polishing wax to polish; Re-repair of stainless steel surface, 2Brushed :

    The stainless steel material of the wire drawing plate can be directly drawn with a wire drawing cloth; This repairs scratches on the stainless steel surface of the brushed sheet. 3.Passivation:

    After the stainless steel is scratched, the surface passivation film is affected, and the surface treatment can be repaired by weld pickling passivation technology. 4.Sandblasting:

    If it is a matte stainless steel material, you can use the sandblasting method to repair scratches.

    Drawing: The stainless steel material of the drawing plate can be directly drawn with a brushed cloth; This repairs scratches on the stainless steel surface of the brushed sheet. Passivation: After the stainless steel is scratched, the surface passivation film is affected, and the surface treatment can be repaired with weld pickling passivation technology.

  13. Anonymous users2024-02-04

    Summary. The stainless steel scratches in the elevator car can be polished. The polishing process can fill in the surface scratches and other surface defects of the stainless steel.

    There are many methods for surface polishing of stainless steel, and the three methods that occupy a large market share and are more used in industrial production are mechanical polishing, chemical polishing and electrochemical polishing. These three methods have been continuously improved, improved and perfected after long-term use, and their methods and processes can be suitable for polishing under different conditions and requirements, and can ensure product quality while the production efficiency is relatively high, the production cost is low, and the economic benefits are good.

    Mechanical polishing is to plastically deform the surface of the material by cutting and grinding, and to reduce the convex part of the polished surface of the material to fill the recess and reduce the surface roughness and become smooth. Chemical polishing refers to the smooth and bright surface of stainless steel through regular dissolution. Electrochemical polishing is a selective anodic dissolution of the metal through direct current to improve the brightness of the surface and achieve a mirror effect.

    What are the repair methods for elevator stainless steel scratches?

    Hello, I have seen your question and am sorting out the answer, please wait a while

    The stainless steel scratches in the elevator car can be polished. The polishing process can fill in the surface scratches and other surface defects of the stainless steel. There are many methods for surface polishing of stainless steel, and the three methods that occupy a large market share and are more used in industrial production are mechanical polishing, chemical polishing and electrochemical polishing.

    These three methods have been continuously improved, improved and perfected after long-term use, and their methods and processes can be suitable for polishing under different conditions and requirements, and can ensure product quality while the production efficiency is relatively high, the production cost is low, and the economic benefits are good. Mechanical polishing is to plastically deform the surface of the material by cutting and grinding, and to reduce the convex part of the polished surface of the material to fill the recess and reduce the surface roughness and become smooth. Chemical polishing refers to the smooth and bright surface of stainless steel through regular dissolution.

    Electrochemical polishing is a selective anodic dissolution of the metal through direct current to improve the brightness of the surface and achieve a mirror effect.

Related questions
4 answers2024-08-12

Why is stainless steel also magnetic? People often think that magnets adsorb stainless steel, verify their advantages and disadvantages, and verify their authenticity, do not absorb non-magnetic, think that it is good, genuine; If the smoker is magnetic, it is considered to be a fake. In fact, this is an extremely one-sided and unrealistic way of discerning errors. >>>More

5 answers2024-08-12

Generally, stainless steel is a combination of iron, chromium, nickel and other components, but we use stainless steel chopsticks to eat, but we need to pay attention to whether the stainless steel is food-grade stainless steel. Food-grade stainless steel can be used as cutlery boxes, food packaging shells, etc. Then when we buy stainless steel chopsticks, we should carefully see whether the material of the chopsticks is food-grade stainless steel. >>>More

9 answers2024-08-12

Stainless steel tableware itself is not harmful to the human body, but stainless steel tableware must be used correctly, otherwise it will bring unexpected trouble to everyone. >>>More

17 answers2024-08-12

Note that the countertop of the stainless steel cabinet should be kept dry as much as possible, and try to avoid long-term immersion in water, which is to prevent the deformation of the countertop. Do not put anything too heavy or too sharp on the stainless steel cabinet countertop. It can usually be cleaned. >>>More

9 answers2024-08-12

1) The use of stainless steel elevator door cover form, in the whole elevator decoration process, the use of pattern elements, the superposition between patterns and patterns, crossing, and the overlap between a variety of patterns, which does not occupy space, can play a good visual effect. Due to the small space of the car, the use of trompe l'oeil, the use of points, lines, and planes of the continuous combination, so as to build a "large space in the heart", at the same time, make full use of modern decorative materials and concepts, combined with processing technology, highlight the sense of space hierarchy, three-dimensional. 2) The use of stainless steel elevator door cover color, the space color should mainly meet the dual requirements of function and spirit, the purpose is to make people feel comfortable, warm and safe. >>>More