What should I do if I can t wipe my handprints in the elevator?

Updated on healthy 2024-08-12
15 answers
  1. Anonymous users2024-02-16

    Baking soda can be removed.

    Wiping the surface of the aluminum alloy with baking soda can eliminate fingerprints. Adding a little baking soda to the water will not only burn your hands, but also clean the bottom of a stainless steel, copper, or iron pot. Very clean.

    In addition, it is very easy to leave fingerprints when cleaning stainless steel appliances, but you can wipe stainless steel appliances in the same way, not only can you easily remove fingerprints, but also cleaner.

    Extended Information: Maintenance of Stainless Steel Panels of Elevator Cars:

    The surface of stainless steel has dust, which is easy to remove dirt. It can be washed with soap, weak detergent or warm water.

    2.Wipe off grease, grease and lubricating oil from the surface of the stainless steel with a soft cloth, then use a neutral detergent or ammonia solution.

    or special detergent for cleaning.

    3.Stainless steel has rainbow patterns on the surface, which are caused by excessive use of detergent or oil. When washing, you can wash it with warm water detergent. Rust caused by dirt on the surface of stainless steel can be treated with 10% nitric acid.

    or abrasive cleaners or special cleaners.

    4.The stainless steel surface contains bleach.

    and various acidic adhesions. Rinse immediately with water, then dilute with ammonia solution or neutral carbonated soda solution, wash with neutral detergent or warm water.

    5.When cleaning stainless steel surfaces, avoid scratching the surface, avoid using bleaching ingredients, abrasive lotions, steel balls, grinding tools, etc. , remove the cleaning solution and rinse the surface with clean water.

  2. Anonymous users2024-02-15

    Small area of toilet water, alcohol, wind oil. Stainless steel cleaner is used in a large area, and a special stainless steel cleaner is randomly distributed when the elevator leaves the factory, and the stain removal effect is very good, and the stainless steel cleaning care solution can effectively remove dust, handprints, water stains, food stains, oil stains, kitchen oil stains and other daily dirt on the surface of stainless steel. It contains unique ingredients that give stainless steel a beautiful shine while maintaining it.

    The stainless steel surface is not easy to get dust, fresh and bright. If it's paint, wipe it with gasoline to wipe it off, if it's a general stain, wipe it with dish soap, and then wipe it off with a clean damp cloth. ”

  3. Anonymous users2024-02-14

    You can try talcum powder, but if it doesn't work, you can go to a store that sells stainless steel decoration materials to sell a small bottle of steel washing water, wash the rusty parts, and rinse it with water after 5-10 minutes.

  4. Anonymous users2024-02-13

    Just rub it with alcohol and it's very effective.

  5. Anonymous users2024-02-12

    Look at what kind of handprint, if it's paint, wipe it with gasoline, you can wipe it off, if it's a general stain, wipe it with dish soap, and then wipe it with a clean damp cloth.

  6. Anonymous users2024-02-11

    Specialized cleaner for stainless steel.

    When cleaning, pay attention to the degree of oil pollution, 1:4--20 add water to prepare the working liquid, for large pieces, spray cleaning, for small pieces, use ultrasonic cleaning or immersion cleaning, use at room temperature, heat to 50-80 The use effect is better, and then rinse with hot water and flowing water.

    For polishing waxes that are difficult to clean, it is recommended to use ultrasonic cleaning at a temperature of 60-70 for 10-20 minutes, and then rinse with hot water.

  7. Anonymous users2024-02-10

    There are two ways: one is to wipe it with sewing machine oil, and it will be clean, and this oil can be bought in supermarkets.

    The second is to wipe it with the detergent sticky water, and then wipe it with a rag.

    Relatively easy to clean.

  8. Anonymous users2024-02-09

    If it's stainless steel, it's a special cleaner!

  9. Anonymous users2024-02-08

    There is a special oil for stainless steel.

  10. Anonymous users2024-02-07

    If it is stainless steel, you can use stainless steel polish.

  11. Anonymous users2024-02-06

    When the elevator leaves the factory, a special stainless steel cleaner is randomly distributed, and the decontamination effect is very good, you can find it.

  12. Anonymous users2024-02-05

    Just wash the wood residue with dish soap.

  13. Anonymous users2024-02-04

    Acetone, specially washed stainless steel.

  14. Anonymous users2024-02-03

    Stainless steel is used for small engine oil and painted with kerosene.

  15. Anonymous users2024-02-02

    1. Spray some kitchen fumes, or use other detergents, scrub with styrofoam after spraying, and then clean with water. In this way, not only can the oil stains and handprints be completely removed, but also the stainless steel will not be bruised. If there is no foam, you can also use scouring pads and the like to scrub, but if there is a "brushed" pattern on the door, the wiping direction should be consistent with the original processing pattern of stainless steel.

    2. Use baking soda, dip a wet towel in baking soda and gently wipe the surface of the aluminum alloy, and the handprints will disappear without a trace after a while. In addition, it is easy to leave handprints in the use of cleaning stainless steel appliances, and wiping stainless steel appliances with the same method can not only easily remove the handprints, but also wipe out the light of stainless steel to look like new. 3. You can first use alcohol and turpentine to wipe it on paper towels, wet wipes, and lens paper to reduce the corrosion of sweat on the surface surface of stainless steel.

    Then wipe with a paper towel, wet wipe, lens paper or glasses cloth. Wipe with detergent and then again with water. It can be wiped directly with a glasses cloth.

    Pay attention to wipe along the lines.

Related questions
13 answers2024-08-12

There are many reasons why a mortgage cannot be handled, so in practice, different situations are handled differently, and the court will generally give priority to the provisions in the contract when hearing contract disputes. Therefore, the most important basis is the stipulation in the contract on who bears the liability for breach of contract in case of non-approval of the loan. If there is no agreement or the agreement is unclear, it shall be handled according to the following principles: >>>More

16 answers2024-08-12

If you don't want to control your appetite, only exercise can achieve your ideal effect, if you have time, running is a good choice, and drinking more water can play a role in cleaning up the stomach and intestines, and help you clean up the internal garbage precipitation >>>More

5 answers2024-08-12

Take it easy, think about the problem from a different angle, keep a good record of how much you stick to, and say to yourself, how good you are, you've persevered so much, for example, you've been running for 3 days in a row, I'm going to reward you for sticking to 3 days, you can rest for two days to make adjustments, and then we're going to continue to run for another three days. In short, most people who can't stick to it are giving themselves a negative signal, as long as you change your concept to pay attention to the part you stick to, even if it's just a little bit of persistence and a little bit of progress, make a good record, look at it regularly, strengthen it, and when you don't stick to it when you stop, it should be a necessary buffer, be ready to start again, after two or three such experiences, it will be easy to do it in the future. Come on

9 answers2024-08-12

First of all, it depends on whether your IOU has exceeded the limitation period, the law stipulates that the limitation period of the IOU is 2 years, and the limitation period for the IOU that has indicated the date of performance of the arrears is calculated from the date of the date of repayment of the arrears, and for the IOUs that do not indicate the date of performance of the arrears, the limitation period is calculated from the day after the debtor issues the IOU. If the statute of limitations has expired, there is no legal protection, it is recommended that you take the IOU and ask the debtor to sign it again, and write the current year, month and date, so that the limitation period of the IOU will start again. >>>More

8 answers2024-08-12

I give you advice, do you think it's okay? 1.Look at the world with another eye, not everyone in this world is very smooth, just look at how you solve it, for example, you were hit by someone when you were walking, others apologized to you, sometimes you still feel very angry, but you didn't expect that the person who hit you was actually more uncomfortable than you, or think about the sentence "Happy is also a day, unhappy is also a day, why not be happy every day". >>>More