What should I do if the sewer pipe on my balcony leads to the roof and the shed surface is moldy?

I think this situation must be a leak in the sewer pipe. Didn't do a good job of waterproofing. Personally, I suggest that if you don't know how to repair plumbing, don't do it yourself, because if we are laymen, it is likely to get worse and worse, and you better find a professional plumber maintenance master, fix the plumbing first, and then wait for the roof to dry thoroughly before redecorating the roof.

84 liquid, you can bleach the stain to remove the mildew point, I often use it to brush the dirty place of the wall, soon it will be white, too dirty, you can finish brushing, dry, brush again, brush a few more times.

Don't mix with water, brush directly, remember to wear a mask and gloves, and ventilate, after all, it is disinfectant.

It is also very clean to mop the floor, and I also don't mop it directly with water, that is, I have to mop it with water several times to completely remove the residue of 84 liquid.

The sewer pipe on the balcony leads to the roof and makes the shed moldy, so you get a water pipe to connect it to the sewer nozzle, and the pipe leads directly to the bottom, so that the water can not slip around, so that the problem is solved. If you don't know how to connect the water pipes, then hire a master to do it.

What should I do if the sewer pipe on the balcony leads to the roof and makes the shed moldy? You first find a plumber to redo the waterproofing and repair this sewer, so that you can change your future and avoid re-hairing.

One, turn a blind eye and maintain the status quo.

Second, the sewer pipe is diverted to avoid the roof and go straight to the sewage channel.

Third, renovate the roof. Anti-mildew materials are used.

Fourth, the quality of sewage should be transformed, and the discharge standard should reach the quality of mildew-proof.

This phenomenon should be that the waterproofing is not done well, you can find a plumber to check it, and you can avoid this problem by doing a good job of waterproofing this piece again.

The only way is to divert it.

It is necessary to remove the damp and moldy area of the balcony with a shovel, of course, the original putty inside should also be disposed of together, and then the wall should be repainted through the normal wall construction steps. In addition, it is also necessary to check whether the exterior wall is made of insulation and whether the materials used meet the standards, and if there is a problem, it should be replaced in time.

Causes of resurgence of moisture and mildew on the balcony wall:

1. If the balcony is not well insulated at the beginning of the design, once the indoor temperature difference is large, it will cause the water in the indoor air to condense under the influence of the cold air from the outside, which will eventually lead to the dampness of the wall, and over time, the wall will be moldy.

2. If the indoor water supply pipe and drainage pipe are not installed, or the problem of materials, resulting in water leakage in the later stage, it will lead to a large number of water stains remaining on the wall, and eventually the wall will be damp.

3. In heavy rainy weather, if the balcony window is not closed tightly or there are cracks between the balcony window and the wall, it will cause the rainwater to flow in along the window, resulting in the dampness of the indoor wall. In this case, it is necessary to purchase sealing strips to treat the window gaps to ensure normal use in the later stage.

It should be a hot water pipe, the hot water pipe and the cold water pipe are too close, or the hot water pipe is too close to the wall, the hot water pipe will heat the surrounding air, and then the hot air meets the wall on the side and is cold and cleans into water, and it will grow mold after a long time.

Water pipe leakage first solves the problem of water pipes, need to replace the pipes, after the waterproofing is done, the wall is dry, shovel off the mold, wash and brush the paint.

This has to be brushed again, and it costs a lot of materials and labor.

The reason is that there is a leakage in the waterproofing process of your home, which leads to the seepage of water from the domestic water or the buried pipeline under the tiles, and then leaks to the downstairs through the crack-proof cracks.

Identified causes: waterproofing is damaged, or cracked, or there is a leakage of brushing, and the waterproofing coating film is not seamless.

By doing a pressure test on the water pipe, 8 pressures, and no pressure loss within half an hour, it means that the water pipe is not connected, which means that the domestic water flows under the bricks and causes the leakage to the downstairs).

Leakage downstairs, the main places that may cause the impact are: the top of the downstairs sanitary home, the upper part of the outer wall of the downstairs bathroom, and the adjacent top of the outer wall of the downstairs bathroom.

If there is no other source of water, it must be a leak in your bathroom.

Maybe your bathroom is dark and damp.

This problem should be the responsibility of the developer, first report to the property, if the property can be repaired, they will take care of the repair, if they can't repair it, it must be the developer to help repair it.

If it is within 2 years of receiving the house, the quality of the house is the responsibility of the developer, and if it is more than two years, then the property is responsible. It's good to find the property directly, and whoever is responsible for it will be shared.

Sewer pipes are generally public facilities, depending on whether your house is under warranty, if it is repaired by the developer, if not, it will be repaired by the property.

If you have a property in your community, then you'd better go to the property to negotiate a solution, if not, then it's troublesome!

Remove the moldy wall first, and then brush a layer of 108 glue. With nano waterproofing agent, when the wall has more moisture, it will have black spots and mildew, if you brush latex paint, and then scrape putty, the problem can not be solved. The wall paint should be shoveled off until it reaches the bottom of the ash, and the indoor moisture should not be allowed to enter, and many walls will have black spots and mold.

If the walls are leaking water and moldy, you must repair the broken walls first.

First of all, the water pipes must be repaired, and then the walls seep water and become moldy, and the walls must be repaired.

Neighbors can be found to negotiate a solution, and the walls need to be redecorated.

This situation should be contacted by the community property and everyone will solve it together. I want to find out where the leak is and fix it. For roofs and walls that have been leaking water, re-waterproof, waterproof and test before putting them into use.

As for the costs incurred, they should be borne by the property and the neighbors.

If the adjacent party does not comply with the court's decision, the injured party can request the construction team to carry out repairs from the downstairs, and the resulting costs can be compensated by the upstairs owner to the court.

So if it's not the leak caused by the people downstairs, it's the responsibility of the people upstairs. It is upstairs to repair the leak until the leak stops, and to compensate the downstairs for the corresponding damages. You can find the upstairs, if it is within the 5 year waterproof warranty period, the upstairs can find the developer again, after the warranty period, regardless of the upstairs decoration or not, it is the responsibility of the upstairs.

If the other party is messing around, you can also directly take the developer and the people upstairs to the court, which is very helpful and the most direct and effective way to protect rights. Some people and bullies who are afraid of the hard, once you go to court, they will become weak, and then they will obediently compensate. As for maintenance, you can directly find third-party maintenance personnel, who generally provide professional technical advice on concrete waterproof leakage repair to avoid the trouble of repairing today, leaking tomorrow, repairing year after year, and leaking year after year.

In addition, the decoration company you are looking for should ensure the quality of the decoration and avoid the possibility of water leakage again, which is good for both sides of your neighborhood and reduces the occurrence of greater conflicts.

By repainting the latex paint, the mold on the wall is solved. If the negotiation fails, it is recommended that a lawyer be retained to file a lawsuit with the court for resolution.

I think this can be resolved through negotiation with the residents upstairs, and harmony is precious.

It is the responsibility of the upstairs, and the upstairs is responsible for repairing the water to no longer leak to the downstairs and compensating for the corresponding losses downstairs. You look upstairs, if it's within the 5-year water quality warranty.

You have to find the upstairs tenants to go to this. The loss caused, let him go to the renovation company to be responsible for reprocessing.

You can also directly sue the developer and the upstairs to the court, the property is an auxiliary role, sue it is not much use, some people you just go to the court.

The best way to negotiate is to seal the terrace.

Overhaul can not be talked about, directly do a waterproof treatment to spend a thousand two or eight hundred is not expensive, when the time comes, the landlord will discuss whether he will give you money when he comes back to decorate!

This belongs to the public part, looking for property management, you don't have much to do, and besides, in addition to property management, can you coordinate upstairs and downstairs?

Caused by dampness, if it is your home that is moldy first downstairs, it has something to do with you.