There is a leak at the tee connection of the main sewer pipe in my bathroom

1. Coat the adjusted AB glue in the leaking place, and then wrap a layer of ribbon on it, so that the ribbon is soaked with AB glue and then coat a layer of AB glue on the ribbon, the whole process can be divided into two or many times, 2. Use the "plugging king" bag powder. Mix it with water and wrap it in the leakage, and it will dry in a while, and the effect is very good. Dry quickly, prepare before construction.

1. AB glue is another name for two-liquid mixed hardening glue, one liquid is the glue, one liquid is the hardener, the two liquids can be hardened by mixing, and it is not necessary to rely on temperature to harden and mature, so it is a kind of hardening glue at room temperature, which is sometimes used to make models. Generally used in industry.

2. AB glue is the name of two-component adhesive. AB glue with acrylic, epoxy, polyurethane and other components is commercially available. When used in the factory, in order to distinguish it from the conventional large canned epoxy resin, the toothpaste tube is referred to as AB glue.

3. Plugging King is a high-tech product with high performance, inorganic, alkali-free, waterproof, moisture-proof, anti-cracking, anti-seepage and plugging. It solidifies quickly and has much higher density and strength than the current high-grade concrete. It can start to set one minute after mixing, and finally set in three to four minutes, and can also be applied directly on a wet substrate.

Non-toxic, harmless, non-polluting, Portland cement can be added to adjust the retarding time, and the same life as the building.

This accessory is a telescopic joint, which is generally directly inserted here without gluing. The water leakage may be due to the deformation of the rubber pad after a long time. You try to tighten it so that the lid can flatten the pad. There is no good way, it really can't be glued.

Unscrew the water pipe, lay out layers of raw tape and re-tighten it, so that the water will not leak.

What to do if a water pipe is leaking – a leaking water pipe joint.

1 If the water pipe joint at home is leaking, first disconnect the water source and unscrew the interface. If the water leakage at the wire mouth can be removed, if the leakage is not big, you can buy a group of agricultural machinery glue mixed to make up for it.

2. If it is a metal joint, it is either tightened, if it is not tightened, it can be removed directly, add some raw material tape and then re-tighten. If it is aging or it is a glue or welding joint leakage, it is more difficult, it is best to replace it with a new one, and if your own tools and skills are limited, you can find a professional maintenance personnel to repair it.

3. If the PVC sewer pipe is leaking, you can buy a PVC water pipe to connect it yourself, first cut off the broken pipe, put the interface into one end of the pipe first, so that the cutting position of the other end is just flush with the other opening of the interface, so that it can just be straightened, and then send it directly to this end, so that both ends have a certain cross connection distance (length) and then remove it, and use PVC glue to apply it to the inside of the two ends and the outside of the two sewer pipes.

Start by identifying where the water is leaking. If it is only a joint leakage, under the premise that the quality of the pipe is qualified, the joint can be replaced or leak-proof sealing tape and AB sealant can be added to the joint; If the quality of the pipe is not good, the pipe should be replaced. You can also apply the adjusted AB glue in the leaky place, and then wrap a layer of silk ribbon on it, so that the ribbon is soaked with AB glue and then apply a layer of AB glue on the ribbon, and the whole process can be divided into two or many times.

Regarding the leakage at the interface of the plastic sewer pipe in the bathroom, then it is necessary to notify the property in time, or find some waterproof glue to make up the leakage.

If there is a leak at the interface of the plastic sewer pipe in the bathroom, you can replace the pipe again, or wrap the place of the pipe with tape.

Hello! Minor water seepage can be applied with sealant. If not, use PVC glue or oil-based adhesive to wipe the gaps. Still no, you can only change the tube and re-bond!

You can buy a special sealant to coat it, if it is not good, directly replace the sewer pipe fittings, or directly find a plumber to help repair it, it is easier to repair.

You can wrap some adhesive strips around the sewer pipe and the interface to prevent water leakage and effectively prevent water leakage.

If this happens, cut it off and reinstall a fitting to connect them together, which is the safest way to do so.

If there is water leakage at the pipe interface of the plastic sewer in the bathroom, it is a glue leakage at the connection, or the water pressure is relatively large, so you can find a professional master to deal with it.

If there is a leak at the sewer connection, then it must be necessary to buy a new sewer pipe, and it is most suitable to replace it.

This water leakage can find a water and electricity master to repair it for you, and the cost is estimated to be enough for 200 yuan, because the leakage will smell, so repair it quickly.

First, use a small hacksaw to see off the leaking place, the saw edge should be flat, then use sandpaper to gently polish the newly exposed port, and then wipe the port clean with a clean cloth. Then apply the glue on the port, let it dry for a while, in the process of waiting, you can apply the glue in the "bamboo" joint, and after the glue on the port is dry, connect the port and the "bamboo", and turn it repeatedly until it is firm. Finally, glue is applied to the joints to ensure that there is no water leakage.

Water leakage is generally caused by factors such as loose joints or damaged joints.

In order to avoid water leakage, the sewer pipe must be well sealed, especially at the interface of the pipe. When sealing, the stain must first be cleaned up, then glued with glue, and dried to make sure that there is no other debris in the pipe during the connection process.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

Summary. Dear, hello, it is a pleasure to answer for you who is responsible for the leakage of the main sewer pipe tee is the responsibility of the neighbor in finding out that the leakage on the upper floor. The third is to see if the house is still within the warranty period, if the house leaks water is not man-made, and it is still within the warranty period, the developer is responsible.

If the main sewer pipe is damaged, the tee is leaking, if it is not man-made damage, and the developer has passed the warranty period, then it should be the property company to manage the maintenance, and the property company can be repaired, they are responsible for the main sewer pipe.

Dear, hello, it is a pleasure to answer for you who is responsible for the leakage of the main sewer pipe tee is the responsibility of the neighbor in finding out that the leakage on the upper floor. The third is to see if the house is still within the warranty period, if the house leaks water is not man-made, and it is still within the warranty period, the developer is responsible. If the main sewer pipe is damaged, the tee is leaking, if it is not man-made damage, and the developer has passed the warranty period, then it should be the property company to manage the maintenance, and the property company can be repaired, they are responsible for the main sewer pipe.

There is no property, it is a house on the side of the street, a total of four floors, the third floor of our house, the third floor of the sewer pipe is broken, should the fault of whoever is responsible for the family or the upstairs residents and the third floor residents are responsible. Upstairs is not willing to be responsible now, and the last lawyer said I can sue her, do you need a lawyer to prosecute, what is the process, you can take the lawsuit.

A lawyer is definitely required to prosecute.

You have to pay for it yourself, right?

Yes. Upstairs don't want to pay, I can block their upstairs water pipes, no, it's illegal.

Breaking the law. I called ** upstairs, saying that the water pipe is public, upstairs is unwilling to pay, upstairs directly let me plug it, then I'll plug it, it's okay, even if the police call later, it's a civil dispute.

Yes. It's the director's three links that are broken, and it's sure that the two should be responsible, and the upstairs told me that the community also said that our family should be fully responsible. But I don't have time to go to the community and ask, so you can see if you are sure to see, it should indeed be in charge of both upstairs and say that if it is blocked, then I will be blocked.

Be sure to make sure of it. Yes.

Legal analysis: If it is not the destruction of the downstairs residents, it should be the upstairs residents who are responsible. If there is damage caused to the downstairs, the upstairs residents are also liable for compensation.

Legal basis: Article 179 of the Civil Code of the People's Republic of China The main ways to bear civil liability are:

1) Cease the infringement;

2) removal of obstructions;

c) eliminate the danger;

4) the return of property;

5) restitution;

6) Repair, rework, and replacement;

vii) continued performance;

8) Compensation for losses;

9) Payment of liquidated damages;

10) Eliminate the impact and restore reputation;

11) Apologize.

Where the law provides for punitive damages, follow those provisions. The methods of bearing civil liability provided for in this article may be applied separately or in combination.

Summary. Dear, hello, I am happy to provide you with an answer, the following personnel need to bear the corresponding responsibility: 1. The service life of the house is delivered, and the developer is responsible if it is within the scope of quality warranty; 2. If the leakage part is reinstalled, the decoration company is responsible; 3. The neighboring party may request the neighboring party to repair the cause immediately or in a timely manner on the basis of the report, and may request the adjacent party to compensate for the damage caused during the repair period.

Dear, hello, I am happy to provide you with an answer, the following people need to bear the corresponding responsibilities: 1. Rent Jianfan house delivery service life, if the hail is within the scope of quality warranty, the developer is responsible; 2. If the leakage part is reinstalled, the decoration company is responsible; 3. The neighboring party may request the adjacent party to repair the trousers immediately or in a timely manner based on the report, and may request the adjacent party to compensate for the damage caused during the repair period.

When the renovation downstairs leaked, at this time it is necessary to determine who should be responsible according to the specific situation, and it is necessary to find out the cause of the leakage, and then the two sides had better negotiate, if the house is still within the warranty period, then there should be a developer to solve it.

The two-year warranty period has passed, my home is upstairs, I have been staying for a long time, and the downstairs recently planned to renovate, only to find that the downstairs bathroom drain tee joint leaked.

Now the property says it's upstairs responsibility.

Let the property negotiate.

The property is now said to be the responsibility of my family, let my family repair, this is their problem.

There should be a property to repair.

Do you have any relevant documents?

There is no pro.

Toilet drains are widely used. It is mainly used for the piping of the tap water supply system, drainage, exhaust and sewage sanitary pipes, underground drainage pipe systems, rainwater pipes and threading pipes for the installation of electrical wires in housing construction. What should I do if the bathroom drain joint is leaking?

Toilet drain pipe joint leakage practice. The inspection method is as follows: (1) What should I do if the water limb trap is leaking

The manifestation of this situation is that the leakage is continuous and uninterrupted, and sometimes the leakage volume is constantly increasing, such as closing the main valve of the water pipe, and the leakage will be reduced immediately. (2) Sewer leakage: first observe the leakage amount, and make a record, and then open all the faucets, toilets and drain water to the floor drain multiple times, if the leakage increases, it means that the pipe is damaged and leaking.

3) In the wisdom of toilet safety, the construction method of pipeline leakage: the original ground, various sanitary ware and waterproof layer need to be removed, and the waterproof and pipeline should be re-laid. If the joint is leaking, you go to the market and buy a pipe clamp, which is the one with a seal ring on both halves.

Install it at the leakage point and tighten itIt is best to treat the pipe indication and then brush it with a coat of anti-rust paint. After the wall you mentioned is dry, you can decorate it.

Tell you: This can only ensure that your home's water is not leaking, if the conditions are good! It is recommended to renovate the whole thing.