What glue to glue wood and aluminum together

1) Woodworking glue. It is suitable for rapid bonding of furniture, woodworking tenon, assembly, wood splicing and other parts. 1. Moisture content of bonded wood:

6-10%。2. The uniformity of the adhesive layer coating does not exceed the error. 3. The bonded material should be pressurized after bonding, and its pressure should be adjusted according to different materials, 6-10kg cm2 for low-density materials and 12-18 kg cm2 for high-density materials.

4. The pressurization time can be from 30 minutes to 2 hours, which can be adjusted appropriately according to the ambient temperature. 5. The adhesive material should be placed for 24 hours before it can be machined. 6. Please operate and use in an environment above 50C.

Scope of application: 222286 is a high-solid component, a fast adhesive, general furniture, carpentry tenon, Polyflor board, Melamine board, wood bricks, stone, decorative paper, leather, linen, paper, etc. (2), cyanoacrylate 401:

General-purpose, non-inactivating hard-to-bond surfaces and adhesive, medium viscosity, suitable for most materials. 403: Low odor, low albino, medium to high viscosity.

406: General Purpose, Non-Inactivating Hard-to-Bond Surface Adhesive, Low Viscosity, Bonding Acidic, Porous Materials and Humid Environments. 410：

Good resistance to shock, vibration and heat. 411: Impact resistance, peel resistance, good fillability.

414: material bonding, good weather resistance. 415：

Metal bonded, impact resistant. 416: Fill Gap, General Purpose 460:

Low odor, low albino, medium viscosity. 480: Enhanced.

Good resistance to shock, vibration and heat. 495: Plastic bonding, general purpose, for self-adhesive or inter-adhesive of plastics, rubber and metals.

496: General Purpose for Metal Bonding 498: Resistant to heat cycles, high temperatures, long-term durability at 106 degrees Celsius.

Wood and aluminum glue together with YH-896 glue.

Hello dear, it's an honor to have your problem, the solution to your problem is as follows:1You can try model glue - super glue imported from UHU in Germany [Scope of application] It is suitable for wood, paper, fiber, textiles, leather, glass, metal, rubber, porcelain and other materials can be bonded to various items, (but generally will not be bonded to special items such as glass) [Functional characteristics] Strong adhesion, fast natural curing, transparent and traceless, soft ps:

This glue was used as a model when I was in school, and it was transparent after drying, and I think it dries more slowly. 2.Brother two good AB glue capacity:

A glue 40 grams + B glue 40 grams a plate capacity of 80g is: A glue 40g + B glue 40g can be used for steel, iron, aluminum, aluminum alloy, titanium, stainless steel, ABS, PVC, nylon (polyamide), polycarbonate, plexiglass (polymethyl methacrylate), tempered glass, polyester resin, polyurethane, cement, ceramics, wood, laminate and other materials between the same or different materials. 3。

Fish bead glue use: suitable for plywood, fireproof board, aluminum-plastic board, tabletop, MDF, MDF and other room decoration, automobile decoration and art advertising industry. It is suitable for the bonding of glass, ceramic, metal, leather, shoes and luggage.

It is suitable for plastic flowers, handicrafts, toys, lighting, electrical appliances, electronic industries, sports equipment, etc. PS: I used this one a lot when I was in school.

It has a wide range of uses, but I only seem to use it to stick to wooden strips, which is easy to stick to my hands, and it turns yellow after drying, and dries quickly.

Kiss, <>

We're glad to answer your questions! Aluminum-plastic panel and wood The glue for aluminum-plastic panel and wood-board glue together is universal glue and 502. All-purpose glue:

Good resistance to oils, solvents and chemicals. Extended Information The method of the party is as follows: Step 1:

The glue for pasting aluminum-plastic panels on the surface of the plywood should be prepared, and this glue can be seen in the general building materials market or board sales stores. Some are called special glue for aluminum-plastic panels, also known as all-purpose glue, pay attention to the instructions for the use of glue; Step 2: Pay attention to the thickness of the aluminum-plastic panel, the thickness of the aluminum-composite panel suitable for pasting construction is 3 mm or below, and the thickness of 4 mm or more is suitable for dry hanging; Step 3:

The substrate or substrate is generally wood plywood, of course, the surface of other materials can also be pasted with aluminum-plastic panels; Step 4: The aluminum-plastic panel and the bottom plate should be evenly coated with glue, and the two will be pasted and combined after the surface is dry. and with a rubber hammer appropriately; After padding, make an even tap to ensure that there are no gaps; Hope mine can help you!

Wood and aluminum can be glued with HY-303 glue for quick drying, and HY-T160 glue can be used for slow drying.

HY-303 metal glue is mainly used for the adhesive of various plastic materials such as metal, ABS, PVC, ordinary plastics and other plastic materials, such as: metal and ABS adhesive, plastic and metal adhesive, metal adhesive wood glue, bonding between various plastics and other materials for rapid adhesion between each other, and the adhesion is super strong.

HY-T160 PP PE slow adhesive adhesive is mainly used for bonding various difficult-to-stick plastic products, such as: polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), ABS, nylon, sponge, film, foam, etc.; It also has good adhesion to plexiglass, rubber, metal, bamboo, wood, fabric and paper, especially for the mutual adhesion and cross-bonding of plastic and metal and non-metallic materials, which is an ideal adhesive material for home appliance industry, radio industry, decoration and decoration, craft toys, thermal insulation materials, packaging and printing industries.

Wood and aluminum are glued in a small area, and YH-896 is used

Large-area adhesive wood and aluminum with easy-to-fit YH-T806 special glue.

Easy-to-fit glue.

Metal to metal, plastic, glass, wood, etc. bonding:

1. Using QN-505AB glue, two-component glue, high bonding strength, low cost, suitable for bonding of various metal materials. However, the high temperature resistance is poor, and the maximum long-term resistance is only 80 degrees; AB is required to be mixed, and the operation is slightly inconvenient.

2. Using QN-906AB glue, it is suitable for all kinds of metal bonding, high and low temperature resistance, and high bonding strength.

3. KeyDAK (KD-340) anoxic adhesive is used, which needs to be sealed under pressure and the adhesive layer can be cured after hypoxia. High adhesive strength, high and low temperature resistance.

Metal bonding with metal, glass, plastic, wood, etc., requires colloidal elasticity

The use of G-988 elastic adhesive, the glue is a one-component room temperature vulcanized adhesive, after curing, the elastomer has excellent waterproof, shockproof adhesive, high and low temperature resistance, 1-2mm thickness, about 10 minutes of initial solidification, 5-6 hours of basic curing, has a certain strength. It takes at least 24 hours for it to cure completely. One-component, no mixing required, just apply and let stand after extrusion, no need to heat.

Metal to metal, plastic, wood, glass, etc., bonding, requiring quick positioning:

Keydak (KD-855) metal glue is used to quickly bond metal, wood, stone, plastic and other materials in seconds or tens of seconds.

Our company has wood and aluminum alloy adhesives.

It has high strength and good toughness, and can absorb the stress caused by the cold and hot expansion of the two substrates.

Kul Industries.

Summary. What glue is used for aluminum alloy and wood.

Trouble: After seeing the answer, click to end the consultation, give a like, I wish you a prosperous Year of the Tiger!