Ask for help on how to open the bait, and how to open the bait for novices

When configured, add the bait containing the drawing powder, and add the drawing powder to the bait without the drawing powder at 25-30%, and then stir it together with the bait containing the drawing powder. Just open the bait. Look at your recipe The bloodworm crucian carp may contain silk, but I have not used it on the Huashi ruler, and I don't know if it contains silk, so you can try it alone.

All other baits are filament-free. The overall formula seems to have a lot of coarse grains, and only the small ingredients are bloodworm crucian carp, and you can add some medium particle ingredients, and baits such as super lure can also be used.

To make bait, usually add about 15% of the total amount of bait (the specific proportion should be tried and tested) of the drawing powder, you can become a bait, the landlord can go to the "fish music**" in the "new version of the competitive carp fishing method", Mr. Cheng has a detailed explanation of the production of bait.

You can add 15% brushed powder to your bait and see how it is pulled.

Landlord, Brother Yufengzi has your problem, the silk is slow in winter, you can consider using warm water to open the bait. To study the bait, don't go to the fishing point to open, usually you should try it at home, see how much of the drawing is in the best state, and you will have the bottom in your heart when you open the bait in the future.

Pull the bait: At least increase the drawing powder by about 25%, after all, it is not easy to produce silk in cold weather.

The correct way to open the bait, the proportion is very accurate, come and learn!

1. The bait is generally used when the fish is particularly good, which is equivalent to grabbing the fish and getting the bait faster.

2. If the fish opening is not good, you can also use the bait, at this time, the fish attraction effect is good, and the entrance is better 3. Before pulling the bait, the bait is solid, the bait can not be too hard, the drawing powder can not be too little, and the fermentation for 5 minutes will wait for the silk to come out and then pull.

4. Put the bait on the plate, gently hold the line of the bait double hook to separate, and pull the bait directly 5, if it is not round enough, you can pull it again, remember that the hook must be the line in the hook handle 6, if you want to atomize slowly, avoid small fish, then you can pull the bait after the group.

Here's how to open a lure for beginners:

Use a measuring cup to measure, a cup of bait, and a glass of water in the area being fished. Open your fingers and stir quickly, let stand for about 5 minutes, the time of standing is slightly shorter, put the bait together after standing, and let it stand for about 5 minutes. When the time is up, hold the bait lightly into a ball, and break it to see the drawing.

After the bait stands for a few minutes, don't rush to knead and hold the ball, first Tonglinghe grabs a little to see the softness and hardness, if it is too dry, use five fingers to dip the water on the surface of the bait, if it is too wet, sprinkle some dry bait to collect water. After the degree of softness and hardness is adjusted, first gently knead two or three handfuls, hold them into a ball, and squeeze out the air.

The extended information is as follows:

The precautions are as follows:

In the case of low air temperature and water temperature, the bait should be opened 30 to 60 minutes in advance, and the amount of water should be slightly more. Assuming that the bait-to-water ratio is 1:1 at room temperature, the bait can be opened at a ratio of 1:1 in winter. Bureau faction.

When opening bait in the hot season, be sure to use it now. In particular, high-fat baits will destroy the drawing ingredients, so be careful when opening the bait. <>

If the situation does not improve, it is necessary to see if the strand of the hook is on the inside of the barb (the strand on the outside of the barb will definitely affect the bait). If there is no problem, it means that there is less brushed powder in the bait.

1. Before opening the bait, you should choose the bait, know the characteristics of the bait you want to use, such as the flavor of the bait, the ratio of bait to water, the specific gravity and what kind of fish it is used to catch, only by knowing these most basic things can we open the bait according to its characteristics, and the state of the bait will be good, which will directly affect whether we can catch fish;

2. Anglers have a very bad habit, that is, they always open the bait according to their own feelings, and it is best for us to open the bait in strict accordance with the bait-water ratio if we have the conditions. In addition, if it is a one-time bait, do not add water when it is dry or wet to add bait. The amount of bait opened at one time should not be too much, so as not to take a long time, the state will deteriorate, and it is easy to cause waste;

3. When opening the bait, you can't rub it too much, you should understand this;

4. Pay attention to the specific gravity of bait, bait with different specific gravity, sometimes the bait method will be slightly different, and after the use of it, its atomization and state will be very different;

5. The change of bait state is a dynamic change process, and it is easy to kill the bait if it is rubbed excessively, and the hook attachment is poor if it is not kneaded, so it is a test of the on-the-spot adaptability of anglers;

6. Pay attention to the adaptability of bait matching, and the matching formula is: basic bait + main bait + state bait. Some baits can be opened alone, and some need to be used according to fish conditions and water conditions.

For baits with good atomization status, there is no need to add state bait that enhances the atomization effect, and bait with good viscosity does not need to add state bait that enhances viscosity;

7. The preservation of bait is also particular. The bait should be placed in the bait basin and should not be exposed to the sun; During use, pay attention to keep it hydrated, wet it with a clean towel, and then wring it out and cover it on the bait basin.

Usually the choice of rubbing and pulling bait is based on the needs of the fishing spot. Bottom bait, float bait. This is because the weight of the bait is higher, and the pull bait is suitable for fishing shallow water due to the addition of drawing powder when matching the bait, which has a small specific gravity.

The difference between rubbing and pulling doesn't stop there. Heavy atomization of rubbing bait, to test the preparation effect of rubbing bait, you can place the rubbed bait in the water, see the atomization effect after 3 minutes, and in terms of hook attachment, as long as the bait can be fixed on the hook.

Pay attention to the hook attachment, check the configuration effect, first break the bait to see the silk effect, and then try to pull the bait, a good bait is able to attach a larger bait to the hook and little bait on the line. The difference in atomization determines that the bait has a better effect in luring fish to make a nest, and in the case of good fish aggregation effect, the use of bait can improve the efficiency of rod casting.

Obviously, the hanging bait efficiency of pulling bait is obviously higher than that of rubbing bait, so the combination of rubbing and pulling in competitive fishing is generally a combination of rubbing to make a nest, then pulling down the rod, and then rubbing the bait to gather fish.

This is the main difference between rubbing and pulling bait. On this basis, according to the actual situation, there are various options for the combination of rubbing and pulling bait. For example, bottom fishing, rubbing bait, floating fishing, fast fishing, slow fishing, fishing, small fishing, big fishing, poor opening, good opening, good bait, blunt fishing, smart fishing, fishing through the layer, cunning with rubbing, practical pulling, etc.

The difference between the preparation of rubbing bait and pulling bait is that pulling bait adds 10%-20% of the amount of bait drawing powder on the basis of rubbing bait ingredients, and the change in the bait-water ratio also changes slightly.

With the characteristics of rubbing the bait and pulling the bait lightly, sometimes the two also have the practice of matching each other on the bait, rubbing and pulling. Corresponding to rubbing, pulling bait, float can also be changed. The bottom is suitable for shuttle drifting at both ends, and the fishing float is suitable for olive drifting or short drifting with long drifting tips.

Bait, you should have a bait tray du, there are two or three magnets on the bait tray.

dao, when the hook is close to the magnet, the two hooks will be separated in different positions of the magnet, and then put the bait group, put it on the two hooks, lift the hook, enough will pass through the bait group, the hook should be left with the same bait as the size of the hook, the shape of the bait is related to the live bait, sometimes the hook is silk, or the bait is very large, that means that the wire is more, after the bait is scattered, put some snow pollen, if the bait on the hook is small or empty, it means that the wire is less, to break up the bait, and then put some wire drawing, mix well.

There are two ways to pull the hook, one is to pull up, when the bait is relatively thin, you can pull it like this, when the bait is dry, use it, pull it flat, and let the hook scrape out two baits from the edge of the bait ball. A pull-up is when the bait is placed on top of the hook, a hook is on the hook, and a flat pull is a hook that is pulled out from the side.

The two differences, pull-up, are easy to have bait flavor and residue on the strand, and flat-pull residue and taste are less.

I can only experience this by myself, mainly the use ratio of brushed powder and snowflake powder, and the state of the bait. I checked it with a hook.

Prepare a measuring cup to accurately measure the bait and water, and grasp the water ratio is a must-learn for beginners who pull bait.

Prepare a larger bait pot. Why does it have to be bigger? Because of the large bait pot, the bait can be evenly spread, so that the bait layer is relatively thin, and this design can make the bait better, faster and more evenly absorb water, which is very important for opening a good bait.

Be sure to add water in place at one time, rather add more than less, if you add more water, you can add some bait to collect water, and if you add less water, the state will be much worse.

Stir briskly. The effect of rapid stirring is actually to make all the bait absorb water. But don't stir too much, usually a few strokes are fine. Stirring too much will ruin the drawing and is not good for pulling the bait.

After mixing, it is necessary to allow the bait to sit to absorb water. Do not move when standing to avoid damaging the drawing.

After letting it stand, gently fold it into a ball and squeeze out the remaining air. Don't rub it too much. It's good to knead it a little, but rubbing too much will make the drawing entangled, but it won't be good to pull.

Note: Usually crucian carp baits contain brushed powder, so you don't need to add too much brushed powder.

Bait without drawing powder needs to be opened, and drawing powder can be added according to 20%-30%.

When mixing bait with brushed powder and without brushed powder, you only need to add about 25% brushed powder according to the part that does not contain brushed powder.

The method of pulling the bait is figuratively called stamping, pulling the bait with one hand and holding the rod in the other while pinching the strand.

Please click Enter a description.

When pulling the bait, separate the hook with the help of a magnet on the bait puller. Then, cover the bait with the hook and pull it down.

Through the operation and control of different bait pulling techniques, we can pull out bait of different shapes and sizes.

Please click Enter a description.

If we pull up, then the bait we pull out is usually larger.

When we pull to the side, it is usually more rounded and full.

Another example is to pull the bait as parallel as possible, so the bait we pull out at this time is relatively smaller.

Please click Enter a description.

When pulling the bait, we must pay attention to the nake, we use the edge of the bait to suppress and hold the hook, rather than pressing the whole straight line, otherwise the bait we pull out is likely to be on the hook on the hook.