-
Although the operation of the floor scrubber is simple, what should be paid attention to in the process of operation in order to increase the service life of the floor scrubber?
1. In the area that needs to be cleaned, first carry out preliminary cleaning, mainly for some non-water-soluble large particles, such as small stones, etc., and other garbage that will affect the work of the suction squeeze, the reason is that the suction squeeze should form a closed space with the ground, so that the sewage can be struck, otherwise it will not work normally if it is not closed. This is a big benefit for you to work more efficiently, protect your machines and extend the life of your equipment.
2. Particularly dirty ground can choose not to absorb water first, repeat washing and scrubbing many times alone, and then absorb water separately; Or choose a different cleaner to improve the cleaning effect of floor scrubbing.
3. When encountering uneven fruit ground, sometimes although it has been cleaned, if there is still stagnant water, the brush disc can be raised, the water absorption switch can be started, and the floor scrubber can be pushed to absorb repeatedly and repeatedly in the waterlogged area; If there is a deep groove in the ground, it will affect the water absorption efficiency of the machine, please take care of it according to the situation at that time.
After the end of the daily work of the floor scrubber, be sure to complete the following steps:
1. Wipe the outside of the floor scrubber with a dry or damp cloth, check whether the filter sponge is blocked by water or dirt, if so, please take out the sponge to clean, dry it and then put it in; 2. Empty the sewage in the sewage tank, and then add clean water to clean it, if it is particularly dirty, you can take off the sewage tank and clean it;
3. Raise the brush plate and water squeegee, and park the floor scrubber in a dry, ventilated and flat environment without combustible gas, liquid, chemicals, open flames, etc., and place or charge;
4. If the floor scrubber is stopped for a long time, the sewage tank and clean water tank should be cleaned and the cover should be opened to dry, (the battery should be removed from the battery scrubber), and the dust cloth should be covered on the floor scrubber for storage.
-
Read the floor scrubber manual carefully before use, and use it safely after training. Generally, when we deliver the machine, we will be accompanied by special after-sales service personnel, on-site training of the use of floor scrubbers, and the precautions for operation and correct use methods will be trained.
At the same time, it should be noted that the machine should not be operated until it is fully assembled. Before operating the machine, the user should carefully check the integrity of the machine.
In the area to be cleaned, a preliminary cleaning is carried out first, which is mainly for some large particles that are not water-soluble, such as small stones, etc., and other garbage that will affect the work of the water absorption grid.
This is because the suction grill must form an enclosed space with the ground in order to suck back the sewage, otherwise it will not work normally.
When the cleaning work is finished, empty the sewage in the sewage tank and clean it with clean water, wipe the outside of the floor scrubber with a dry and wet rag respectively, and check whether the filter sponge is blocked by water or dirt. And the brush plate and water squeegee are raised, parked in a dry, ventilated and flat environment without combustible gas, liquid, chemicals, open flames, and then placed or charged.
If it is stopped for a long time, the sewage tank and clean water tank should be cleaned and the lid should be opened to dry, and the battery should be removed and covered with a dustproof cloth on the floor scrubber for storage.
-
1. Read the instructions of the floor scrubber carefully before use, and use it safely after training.
2. Please do not operate the machine before it is fully assembled. Before operating the machine, the user should carefully check the integrity of the machine.
3. In the area to be cleaned, the larger debris on the ground and the garbage that affects the suction and pick-up work should be removed first. This is a great benefit for you to increase your productivity and protect your machines.
Fourth, the particularly dirty ground can be repeatedly cleaned or choose different detergents to improve the cleaning effect of floor washing.
5. Due to the unevenness of the ground, sometimes although it has been cleaned, if there is still stagnant water, the brush plate can be raised, the water absorption switch can be started, and the floor scrubber can be pushed to absorb repeatedly and repeatedly in the waterlogged area.
6. There is a deep trench on the ground, which will affect the water absorption efficiency of the machine, please deal with it according to the situation at that time.
7. Usually when the brush plate is in the rising position, do not start the brush plate motor at will, otherwise the brush plate will be automatically removed.
8. When charging the floor scrubber bottle, please make sure that the socket power supply is in good contact, and the charger plug is in good contact with the battery plug.
9. When the battery of the floor scrubber is used for the first time, the first three charging times should be more than 14 hours, and then it can be fully charged. The charging time is normally about 8 hours, and the charging time may be shorter if the battery is charged with a large current, but the high current will damage the battery life. You can choose to charge at the end of the day and disconnect the charger when you go to work the next day.
When the battery is fully charged, the charger will generally automatically stop charging the battery.
10. When the floor scrubber bottle is not used for a long time, it should be used as a battery every two to three months.
-
Floor scrubber is currently widely used by various enterprises cleaning equipment, the floor scrubber is currently mainly divided into hand-pushed floor scrubber and driving type scrubber, whether it is hand-pushed or driven type scrubber can play a good cleaning effect, for the large cleaning equipment such as floor scrubber, we must understand the operation process of the floor scrubber.
Read the manual of the floor scrubber carefully before use, and use it safely after training. Do not operate the machine until it is fully assembled. Users are advised to check the integrity of the machine carefully before operating it.
In the area to be cleaned, the preliminary cleaning is carried out first, mainly for some non-water-soluble large particles, such as small stones, etc., as well as other garbage that will affect the work of the water absorption grid, especially the dirty ground can choose to be washed again and again without absorbing water first, and then absorbing water separately; Or choose a different cleaner to improve the cleaning effect of floor scrubbing. Because the ground is uneven, sometimes even after cleaning, if there is still stagnant water, the brush plate can be raised, the water absorption switch can be started, and the floor scrubber can be pushed forward, and the water accumulation area can be absorbed repeatedly and repeatedly.
There are deep grooves in the ground, which will affect the water absorption effectiveness of the machine, so please take care of it according to the situation at the time. When the floor scrubber is in the rising position, do not start the brush plate electromechanical, otherwise the brush plate will be automatically removed.
-
The process of the floor scrubber is very simple, I will take the Aidibao floor scrubber I have been using, let's read the manual for assembly after getting it, OK to see how much power there is, if it is enough, press the start button to push it hand-held, no need to bend over, the height is just right. If the battery is out, replace it with another battery, put it back on the base after use, clean it with one key, and then pour out the sewage.
Check the meter to confirm the remaining power before operation, then check the appearance, check whether the cleaning pad or cleaning brush is in good condition, and remove debris and particulate garbage from the floor in advance. After confirming that everything is normal, pull up the solution flow rod, close the solution valve, open the solution tank lid and inject the specified cleaning solution into the machine, and pay attention to the position of the solution while injecting. Reducing the high-efficiency suction and cleaning brushes to the position where they are in contact with the floor ensures that the brushes can fully scrape the floor. >>>More
1. The brush plate motor drives the brush head to clean the ground, and under the action of cleaning liquid, it can play a better cleaning effect. >>>More
Let me take the Hizero floor scrubber as an example to explain its function: >>>More
Introduction: In order to cater to the needs of consumers, there are now more and more smart homes on the market. Some friends have also bought floor scrubbers, so what are the pros and cons of using floor scrubbers? >>>More
There are many parts for floor scrubbers, but the name of the parts will be different for each brand: >>>More