How to completely solve the problem of the watch slowing down?

If you wear it every day to run, instead of walking, it won't go slower, but faster

Buy an expensive watch, you can't slow down, otherwise there will only be an electronic watch.

I started wearing watches when I was in the third grade of elementary school, so it has become my habit to wear watches, but this habit is also conducive to my more attention to the aspect of time.

When you notice that your watch is slowing down, you need to pay attention to whether it is because there is no electron. After all, the watch needs electronics to work properly, and if there is no electricity, it will go slowly, and then slowly stop and not walk.

Therefore, you have to distinguish the reason why the watch is slow, whether it is because there is no electronics or because it is loose. Only by identifying the problem can you solve it. If the watch is because there is no electronics, then you can go to the place where the watch was repaired and replace it.

Once you have changed it, the watch will return to its normal speed. If the watch is slow because it is loose, then you can adjust it yourself. If you can't adjust it yourself, you can also adjust it for the person who repairs the watch.

In addition, it is possible that when you set the time for the watch in the first place, it is already slower than the normal time. If that's why you want the timing to be right, then you're fine.

1. Watch magnetization: Watch magnetization is one of the common reasons for watches to slow down, even if it is an anti-magnetic watch, even if it is an anti-magnetic watch, it cannot be copied next to some electrical appliances, because some of his parts are not anti-magnetic, and they will still be magnetized over time. The watch is magnetized and needs to be demagnetized by a professional watch repair facility.

2. Insufficient power: mechanical watches are divided into two types: manual winding and automatic winding. Lack of power is an important reason why the watch slows down or even stops.

Mechanical watches that are wound by hand can solve the problem by winding, while watches that are self-winding are mostly due to insufficient wearing time (less than 8-10 hours a day) or people who exercise a little bit. Friends in the general office or the elderly often have a mechanical watch with insufficient power, causing the watch to slow down.

3. Insufficient maintenance leads to mechanical failure: daily wear does not pay too much attention, and there is a problem of collision and equal degree, which makes the internal parts of the watch loose, resulting in inaccurate timekeeping of the watch. Dust, foreign matter, so that the gear teeth are stuck with each other, and some watches are too much or very little oil, which will make the electronic watch go badly.

If you have just bought it not long ago, it may be magnetized, if it has been bought for a few years, it is not maintained, and you need to go to the counter or watch store to do a maintenance.

1. The user's activity is insufficient, resulting in the dissatisfaction of the automatic watch, resulting in the watch slowing down or stopping.

2. The watch network is close to the magnetic field, such as TV, mobile phone, etc., which causes the watch to be inaccurate.

3. The wearer itself has a strong magnetic field of the human body, which affects the timekeeping of the watch.

4. The oil sludge of the movement is dry.

Generally, the watch cannot adjust the watch date and time from 9 p.m. to 3 a.m., which can easily cause problems with the internal calendar drive train of the watch, so it is forbidden for the watch to adjust the date during this time.

Automatic watches need to be worn normally for about 8 hours a day, and need normal and appropriate exercise kinetic energy to support the time, and wearing 8 hours a day can support 36 hours of time.

Generally, the watch is close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, and magnetic objects (such as magnets, mobile phones) will cause magnetism, which will affect the watch to run fast or inaccurately or temporarily stop. If the oil in the watch movement is dry, it will increase the frictional resistance between the parts in the watch, causing the watch parts to be damaged and unable to operate normally.

I hope it helps, remember to like oh thank you.

1. The speed of a fully automatic mechanical watch is mainly determined by the pendulum frequency, usually the larger the swing, the smaller the pendulum frequency, and the smaller the pendulum, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structure of the problem. Due to the gravitational pull of the earth, the offset between the horizontal position and the vertical position will produce a displacement, and the mainspring will be unbalanced from the top to the loose, and the torque will be unbalanced, and it will be affected by the external temperature, magnetic field, vibration, etc.

3. Magnetic field utility. After the hairspring is magnetized, the loops between the loops are only visible when worn, and there are sticky or brief loops, especially on the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, resulting in a change in time.

4. The balance of the balance wheel and the balance spring, especially the balance wheel. The balance wheel is very poorly balanced, which will cause the balance wheel to change the precision of the surface at a certain swing.

If you want to repair and maintain the watch, replace the watch accessories, or have any problems with the watch, you can click to consult.

Repair service**: [tel: 4000257918].

[Watch maintenance and repair can refer to the service center to go to 702, Xidan Joy City Office Building, Xicheng District, Beijing] to provide Swiss watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch appearance and replacement of damaged parts, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

1. Magnetization of the watch: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate. After being magnetized, the watch may stop, slow, or fast.

After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to restore it to normal. Therefore, you can only go to a professional watch repair center for demagnetization so that it can return to normal.

2. Lack of maintenance: mechanical watches are maintained every 2-3 years, and quartz watches are maintained every 4-5 years. Watch maintenance requires the movement to be completely disassembled, cleaned, oiled, reassembled, adjusted, and functionally checked; Repair or replace any worn or malfunctioning movement components.

If the watch lacks maintenance, it will cause the parts to wear out, the sludge will dry up, affect the normal running time of the watch, and make the watch appear fast and slow. Regular maintenance of the whole machine can effectively prevent the occurrence of various failures of the watch.

3. Mechanical failure: Mechanical failures such as watch hairspring failures, escapement system failures, and parts and components may cause the watch to appear fast and slow, so when the watch is abnormal, you can first pull out the crown and take it to a professional maintenance organization for the maintenance technician to check the reason.

Reasons and solutions for inaccurate watch time:

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the special repair shop for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and send the watch to a special maintenance point to check the power or replace the battery.

3. Having been beaten or impacted. The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to a special repair shop for testing.

4. Maintenance is required. Lack of oil or wear and tear of internal parts of the movement may cause time-keeping problems, which need to be serviced and sent to a designated repair shop for maintenance services.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error.

Sending it to a designated repair shop for professional inspection and adjustment can restore the watch to the normal error range.

Note: 1. Mechanical watches vary according to the model and manufacturing quality of the movement, and the error of the general watch within 30 seconds per day is within the normal range. Some of the higher precision movements can reach around 10 seconds.

2. Generally speaking, the accuracy of quartz watches is high, and the Swiss standard is that the monthly error is within 15 seconds. Some precision movements can be within a few seconds per year.