How to change the battery of the plug in card water meter, how to change the battery of the plug in

How to replace the battery of the water meter.

Steps to replace the battery:

1.First of all, it is necessary to see that the IC card water meter, gas meter, and heating meter originally used a 3V lithium battery or a lithium battery or a 6V or lithium battery to determine the voltage.

2.Secondly, it depends on the battery model, for example: IC card, water meter, gas meter, heating meter, 3V lithium manganese battery, common model: CR123A

cr14505

cr17450

cr17505

cr18505

CR26500, etc.; IC card water meter, gas meter, heating meter lithium sub battery common model: ER14250M

er14335m

er14505m

er17335m

er18505m

ER26500M, etc.; If the two batteries are wrapped together, the battery model is: 6V lithium manganese battery pack: 2CR14505

2cr17335

2cr17450

2cr17505...Lithium sub-battery pack: 2ER14250M

2er14335m

2er14505m

2er17335m

3.Then it depends on whether the battery is a cable or a plug on the line, if the battery with a wire, use a soldering iron to solder the positive red wire of the battery** on the wiring board of the road board, the black wire or other colored wires are usually the negative pole of the battery, and the wire is soldered at the negative terminal connection.

4.It is best to have a plug, but it must be equipped with a plug with the same spacing as the original model, and the position of the red and black wires must be the same, otherwise it will short circuit and damage the circuit.

5.If the battery has only two wires or the plug model is different, there is no soldering iron. There are also ways.

6.Finally, you can cut off the original old battery plug, connect the wire core with red to red, black to black, and wrap it separately. Install the battery, swipe the water purchase card, and the solenoid valve will be opened, so that the water meter can be used.

With the change of technology, plug-in card water meters have become the first choice for countless families. However, in the process of replacing plug-in water meter batteries, many homeowners encounter some problems that confuse them. For example:

1. How to change the plug-in card water meter battery?

First use the blade to pry open in the direction of the water meter battery case, and then you can see the Phillips screws. Then use a screwdriver to open the Phillips screws and you can see the battery. Next, take out the old battery, unplug it again, and replace it with a new one.

Finally, just insert the card back into the water meter and see if it can be used normally.

2. What are the brands of plug-in card water meters?

1. Huiyi water meter.

So far, Huiyi water meter has a history of more than 20 years, and its headquarters is in Beijing. Over the years, Huiyi Water Meter has been researching smart water meters, and has created a variety of products that meet the needs of families, so Zheng Zhe is a good brand.

2. Shunshui water meter.

It is understood that the water meter has the characteristics of high cost performance, and the main products are vertical cluster thick plug-in card water meter, sticker card water meter, IC card water meter, remote water meter and so on. After years of hard work, remote water meter has become an expert in China's smart water meter solution solution.

3. Ningbo Boyuan.

Ningbo Boyuan belongs to Ningbo Boyuan Smart Water Meter. It is a leader in the field of water meters, and it is also the best supplier of large-diameter water meters and IC card water meters in China. During 2016, Ningbo Boyuan was rated as a cost-effective brand.

Summary: The above has introduced to you how to change the plug-in card water meter battery and what are the relevant content of the plug-in card water meter brand, hoping to give you some small help. If you want to explore more articles related to plug-in water meters, you can ****** again, and the content will be more exciting.

The water meter is used to measure the amount of water used by the owner, usually once a month, and the specific charging standard is subject to the regulations of the local tax company. So how to change the battery of the plugged card water meter? Check it out.

1. How to change the battery of the water meter with a card card.

1. First of all, find the battery compartment on the back of the plug-in card water meter and open the cover of the battery compartment.

2. Then take out the old battery, and then put in a new battery of the same specification, usually a volt lithium sub-battery.

3. Finally, close the lid of the battery compartment.

2. What are the common problems in the use of card water meters?

1. The water meter is idling.

Generally, there are three reasons for this situation, first of all, the water meter pointer rotates at a constant speed, indicating that there may be water leakage in the house, and the owner finds out whether the water pipes and faucets in the house are leaking; Secondly, when the water meter pointer rotates fast and slow, there are two possibilities, one is that there may be air in the pipe, it is recommended to deflate all the water discharge points in the house, if there is no air in the pipe, it may be that the water pipe is laid unreasonably, resulting in water pressure problems, it is recommended to find professionals to deal with it.

2. The water meter does not go.

In the case of normal water use, if the water meter does not go, it means that the water meter is broken, and you must immediately contact the staff of the Water Affairs Bureau, and ask the other party to repair or replace it.

According to experts from Qeeka Home, the water meter must be replaced by the Water Bureau, and the property has no right to replace it privately, so when it is found that the water meter is faulty, it should immediately contact the Water Affairs Bureau to report for repair, or find the property to apply for repair.

3. The water meter bursts in winter.

As we all know, due to the large logarithmic area in winter, the temperature will be relatively low, in the case of necessity, the water meter should take certain insulation measures, so as to avoid the phenomenon of water meter bursting.

Summary: The above about how to change the battery of the card water meter, as well as the common problems of using the card water meter, are introduced here, I hope it will help you. If you want to know more about related information, please pay attention to Qeeka Home.