Is the reinstallation system of Konka TV the same as factory reset?

It's different, the reinstalled system needs to be unlocked before it can be reinstalled, and any version of the system can be installed after unlocking. A factory reset is just a reset of the system settings, and the system version remains unchanged.

Tool: Konka TV.

1、After turning on the TV,Click [System Settings] on the system interface,All setting options are in the system settings。

2、After entering the system settings interface,All aspects of TV settings are classified here,You can click【General settings】Go to the next step。

3. Use the remote control to select the bottom [Restore Factory Status], and the system will automatically restore the default settings after clicking.

Factory reset is to restore to the most basic software function state at the factory, and all the software installed later will be cleared, and if you need to use it, you need to reinstall the required software.

After the factory reset, just like the computer system you use to reinstall the system, only the most basic programs are available, and the other programs need to be reinstalled.

How to restore Konka TV to factory settings:

1. Click the "Settings" button on the desktop.

2. In the settings interface, click the "General" option, and then click the "Restore" option.

3. Switch to the "Reset" interface and tap "Reset All Settings".

4. Tap the "Restore" button in the pop-up dialog box to complete the restoration of all settings.

<> Konka TV factory reset:1、Turn on the TV first。 2、Use the remote control to bring up the menu containing system settings on the TV,And click the icon of system settings。

3. Next, click on the icon of the general settings on the far right of the system settings interface. 4. Finally, click the icon to restore factory status on the interface of general settings to restore factory settings.

This answer applies to Konka 65D6S TV models.

The first is to press and hold the [Select] button and release the channel + button.

The second way: press and hold the selection key and the show key to release it.

The third way: If there is a factory reset on the remote control, press and hold the settings button and restore the factory settings.

1. First turn on the power, turn on the power switch of the set-top box and the TV, and switch to the set-top box connection page.

2. Press "Menu" on the remote control of the set-top box.

3. Enter the new interface and click "System".

4. Click "Restore Factory Status" through the remote control.

5. A prompt box pops up, click "Confirm Restore", and it can be completed.

<> Factory reset method steps:

1. Press the "Settings" button of the remote control with the TV remote control facing the TV;

2. Press the "up, down, left, right" button of the remote control to move the cursor to the system settings, that is, restore the factory settings;

3. Click the confirmation button of the remote control to restore the factory settings.

Note: After factory reset, the data and applications of the TV will be lost, please back up and retain the data and information in time.