What should I do if the win10 I use can t be factory reset

Windows 10 how to factory reset.

Tools Raw materials.

Win10 operating system.

Step Method.

Open the "Start Menu" in the lower left corner of Win10 and select [Computer Settings].

After entering the computer settings, we click on the [Update and Restore] settings at the bottom of the left side.

Then in the Win10 update and restore settings, select [Restore], as shown in the following interface figure.

Next, let's click Start under "Delete everything and reinstall Windows".

It should be noted here that the image file of the previous installation of win10 is needed here, because the computer was installed with a USB flash drive, the image files are all in the USB flash drive, and the WIN10 factory reset needs to use the files in the copy image, so it will prompt: "Some files are missing".

After that, insert the USB flash drive that installed win10 into the computer, and restore the operation again, then you can see the following "initialization" settings, and then we can click [Next].

ps.If you have the previous win10 system image file in the computer, you don't need to insert the USB flash drive where win10 is installed.

Next, you will enter the "Your computer has multiple drives" setting option, there are two options: [Install window drives only] and [All drives], you can choose according to your own situation. Generally, we can select the first item [Install window driver only].

There are some other options to choose from, and we can just follow the prompts to select them. Finally, we will enter the [Ready, you can initialize the computer] prompt, we can click [Initialize].

Finally, the computer will automatically restart, and after restarting the computer, it will enter the "Resetting the computer (progress percentage prompt)" interface, which will take a long time, and will automatically restart 2 times during this period. If you're a laptop user, it's a good idea to make sure the battery is fully charged or connected to a power adapter. After waiting for a long period of time,win10 can be successfully restored to factory settings,Finally enter the system settings interface,Here is the same as the initial setting of the newly installed win01,You can enter the new win10 interface after the setting is completed。

Windows 10 how to factory reset.

In ASUS Windows 10 laptops, you can perform the initialization operation by following the following steps if you cannot access the system:

Note: Before you do this, be sure to back up your personal data on your computer to avoid losing it.

1) After more than two times of abnormal booting, the system will automatically enter the Windows RE interface (System Repair Menu).

b) In the 'Troubleshoot' menu, select 'Reset this PC'.

3) In the pop-up interface, there are two more options, as you can understand from their literal introduction, the first is to delete apps and settings but keep personal files; The second is to delete all personal files and app settings.

In practice, you can choose according to your own needs, if you choose the second option, you must first back up the important data.

Here we take the second as an example: delete all personal files, apps, and settings.

4) If there are multiple partitions in the computer, the following options will appear, according to the needs of the choice whether to delete only the files in the drive letter with Windows installed (generally refers to the C drive), or delete the files in all partitions, here delete all drives as an example.

5) The options of choosing one or the other continue to appear, and the meaning of each can be understood literally, and the first one can be used for general reset.

Delete my files only' option: It takes a short time, and the deleted files can also be recovered.

Delete files and clean up the drive' option: It takes a long time, but it will completely erase the files from the computer.

After clicking on 'Delete my files only', a prompt will appear for confirmation, click 'Initialize' to begin.

6) The computer will then be taken to the initialization screen and will be displayed as a percentage of the reset progress.

After the reset is completed, it will reboot into the system installation interface, where it will reboot multiple times, which is normal.

7) After the above steps are over, the system has been restored, and then we will enter the familiar system configuration interface, which can be configured normally according to our own situation, and will not be repeated here.

After completing the above steps, you can perform the initialization operation.

1. Click the "Start" button in the lower left corner.

2. Click "Settings" - "Update & Security" "- Recovery" - Reset this computer "- Start". (If you can't enter the system, you can also try to force shut down twice, and Nayu will automatically enter the Windows RE repair environment when you boot it for the third time).

3. Choose the right option according to your personal needs. Keep My Files: Delete apps and settings, but keep your personal files.

Delete Everything: Delete all personal files, apps, and settings.

4. If you choose to keep my files, you will be prompted to delete the list of apps for later reinstallation.

If you have multiple partitions or drives, you can choose whether to reset only the drive where your Windows system is located or all of them. Choose whether to "delete my files only" or "delete files and clean drives" according to your needs

1. Click the start button in the lower left corner of the computer and click the "Settings" icon;

2. Click on the "Update & Security" option in the settings;

3. Click the "Restore the Hall" option on the left side, and click the "Start" button under "Reset this computer";

4. Select "Delete Everything", click "Next", all files and software and settings saved in the computer will be deleted, wait for the computer to be executed and restarted, and the celery brain system will be restored to factory settings. If you have important files saved on your computer and it's not convenient to move them to another place, you can select "Keep My Files" to delete all apps and settings, and the files will remain.

If it is a win7 system, you can click "System and Security" in the control panel, click on the "Backup and Restore" option, if you set the restore point when installing the system, you can click the restore point to restore the factory settings, if there is no backup, you can't restore, you can only reinstall the system.