How about the workmanship of 2999 yuan? Xiaomi TV teardown review

The following is a teardown evaluation of Xiaomi TV,Non-professionals should not imitate。

1.Fix the TV and disassemble it later.

<>2.Tear down invalid labels.

3.The next step is the disassembly link,There are as many as 24 screws on the back of Xiaomi TV,You can solve the problem with a screwdriver,It's just that the process is more cumbersome。

4.Once the screws are removed, the one-piece plastic backshell opens easily.

5.The internal structure of Xiaomi TV,You can see that the overall wiring is very neat,Each line is fixed with adhesive tape,And the circuit board design is also relatively neat。

6.Panel problem,It can be seen that it does use a 47-inch IPS wide viewing angle panel from LG Display's original factory,The model of the panel isV470FWSS02,And the packaging of the LCD module is completed in China。

7.Next is the smart core part of Xiaomi TV,You can see that it uses QualcommAPQ8064 quad-core processor,This is also the same processing chip as the previous Xiaomi 2 mobile phone,It also uses SKHYNIX's memory chip and Toshiba's flash memory chip。

8.In addition to the intelligent processing chip,Xiaomi TV also has a special FRC chip,It can automatically adjust the image lag caused by various reasons such as signal,Improve the phenomenon of ghosting。

9.The power board part of Xiaomi TV,Adopt a large yellow board design,Various components are arranged in a decentralized manner,Excellent workmanship。

10.There are two independent split sound cavities built into the left and right under the Xiaomi TV,Support genuineDTS andDolby dual decoding。

11.The internal design of the touch switch directly below the Xiaomi TV,With a breathing light effect when powered on。 You can see that even this part is well designed, with built-in LED lights and a touch sensing system.

12.In the lower left corner, there is also a built-in infrared receiver and a physical power button.

13.There is also relevant product information in the lower right corner of the TV, and you can see that some molds are produced in Zhongshan City.

14.On the back of the board, first remove a few screws on the board, and then unplug the relevant cables that connect to the board.

The above are the steps of the disassembly and evaluation of Xiaomi TV。

Hi! Dear,At present, Xiaomi TV is the same top smart TV3DTV,Cost-effective,Good workmanship,Appearance is atmospheric and high-grade,Recommended to buy。

Disassembling a 48-inch Mi TV can be done by following these steps::

1.Turn off the power and unplug it, making sure the TV is not doing anything.

2.Use a flathead screwdriver to remove all the screws on the back of the TV. When removing the screws, be careful not to let the screws come loose and fall inside the TV.

3.Gently remove the case from the back of the TV. Sometimes it takes some slight force to get the case off, but make sure you don't damage the TV.

4.You can now see the parts inside the TV, including fans, boards, capacitors, and more. If you need to disassemble these parts, you need to be careful to avoid damaging the TV.

5.During the disassembly process, it is necessary to pay attention to safety. Use insulated tools and wear appropriate personal protective equipment to avoid dangers such as electric shock.

Follow-up operations can be continued as needed. These operations require certain electronic technology and disassembly experience, if you are unsure of the operation process, it is recommended to find a professional technician to disassemble and repair.